Quote:
Originally Posted by vespa
Twin, use a regular cable, not crossover and test the setup by connecting to your router. You might have a bad connection at the OBD port or some problem with the ethernet wiring to the CIC. In either case the best solution would be to use the USB adapter method instead.
|
Vespa, I did use a regular straight through cable first, then used crossover just in case. Connection to router works fine as well (cable modem wifi router, connected to a LAN port with wifi disabled, got internet when DHCP enabled). Did this on 2 Windows and 1 Mac laptop.
I may end up going the USB route, but trying to figure out if I have other issues that will prevent me from doing this regardless of interface method. Shouldn't be having this problem with a 2010 CIC (Original, not retrofit).