Quote:
Originally Posted by Sendmewagons
Efthreeoh Any comment here? I ask because my flywheel and pressure plate are already on.. debating if I should buy another set so I can put loctite on.
Also re-reading the attached PDF the torque for the flywheel bolts is listed as 65 ft-lb. Bentley and ISTA have 120Nm (88 ft-lb)
|
I checked my DIY found that I wrote "xx" for the torque spec. I guess I planned on consulting the Bently manual to fill in the blanks and never fixed the citation.
I did not use loctite on the flywheel bolts.
__________________
A manual transmission can be set to "comfort", "sport", and "track" modes simply by the technique and speed at which you shift it; it doesn't need "modes", modes are for manumatics that try to behave like a real 3-pedal manual transmission. If you can money-shift it, it's a manual transmission. "Yeah, but NO ONE puts an automatic trans shift knob on a manual transmission."