|
Yeah, it's RPM mostly and on an otherwise stock rom, nothing to do with limits or monitors. Speed needs to stay at 1.0 down low for sure, might even need to raise base at low speed through 1500-2000rpm.
Watered down DriveLogic would be fine by me, I don't want to do the whole M3 driveline swap, but dug up most of the gear, FD and shift threshold tables, so may try at some point and see if the RPM, shifts, torque calcs, etc. might be made to work with the M3 ZB. I set the stock rom to 2.81 FD for calcs and it didn't freak. Torques are way less jumpy. I'll play with it more, but they don't even use the advertised DCT gears for calcs in all spots or even use the same ratio for the same gear in others.
These are in 1KM0S, 1M DKG app switch:
|