|
On my fronts, E60 535xi, I ended up using 1 of my hook/pin style for the opposite side of the pro style.
This combo pulled it down evenly for easy re-installation. With the pro alone I was close to bottoming out with tension still on the nut. Maybe the pro by itself would have done it but I figured a quick reach for the other one made it a guaranteed cake walk.
Don't let that scare you. Like Antetokounmpo said the auto parts store is always there for rental if you need one.
For me the drivers side front was my first attack. The knuckle spreading thing threw me after reading alot of posts. I ended up breaking a flat bar trying to pound with a 3 lb mallet and prying at the same time. I finally went in, searched again and found the 3/8 to 1/4 socket adapter trick.
Dropped right out pretty much. I had a WTF moment and a little laugh at myself.
You will be happy you DIY when done.
Whatever spring compressor you use, make sure the threaded bolt is greased
|