View Single Post
      10-30-2013, 07:00 PM   #19
Synergy
Captain
United_States
58
Rep
723
Posts

Drives: Jet Black E92
Join Date: Apr 2008
Location: San Jose, CA

iTrader: (8)

Quote:
Originally Posted by michbmw View Post
If you've followed the pump test procedure in the Bentley to test the fuel pump and get no voltage at the connector, then the pump is probably fine. The two wires you want to check are the two heavier gauge wires, the red/white strip one and the brown one. Looks like those are the ones you checked in your pictures. That really only leaves your fuel pump module or wiring in between. If you need to replace the fuel pump module it isn't plug n play, you'll need to get it coded for your vehicle
Thanks for the info. I'm assuming the red/white wire should be 12V? If so, assuming I supply 12V to the fuel pump, the car should start, right?
Appreciate 0