Quote:
Originally Posted by Sensible_
Ok, so...
FRM2 = FRM_70.prg
So yes, when changing vin in tool32 select that prg file.
The date you see of 03/2007 is for the FRM2 which is why we must change the Vehicle Order (VO or FA in German) to reflect this.
The VO is like the DNA of your car...
Hope that helps.
-------
Re winkfp forget manually selecting zusb numbers. The number you see in INPA is current. If your date files are newer that number won't exist in that set of datens.
Instead choose comfort mode, enter vin and just select the ECU family. In your case FRM70.
If you are interested in how it works I'll explain... Ok, well I'll explain anyway....
BMW use 3 numbers to identify correct firmware...
ZB-NR - Like your part number
HW-NR - Hardware number and winkfp *.0pa file
SW-NR - Software number and winkfp *.0da file
Winkfp uses a DAT file for each module which links the current hardware and software numbers to the current zusb number.
|
i am getting an error when using tool32
EDIABAS Fehler 28 : IFH-0018: INITIALIZATION ERROR
i selected FRM_70 but nothing came up in jobs section and seen that error
