|
Will post this to help out anyone else looking to use the Test-o software:
When you open it you will have to find our engine setup. You can play with others but I had the software guru alter the second "DDE 7.3 fur N57" because it seemed the best for our cars.
When you choose it you will see a bunch of parameters but also "custom values" #1-#3. That is where a lot of boost/turbo related parameters are. No matter what parameter you choose at this point you will need to be connected to the car to see anything come up. You can usually identify which line is the value by the figure varying/moving under "value" once the job is pulled up.
Then you can choose it and graph it. Once you choose which graphs you want to see (and you can do this with various Jobs at the same time) you can then do to "File>File logger" and do logging if you'd like. You can even use live gauges as well.
This is a crash course going off memory so if you guys see anything I missed let me know.
|