[blackhawk12332]

Can anyone help with coding of headlights? I upgrade my stock lights using bayoptiks and now have the Vision Retrofit with sequential led eyebrow. I have a pre lci e92 335i 2009. Below is picture of what they said needed to be coded. I am using protool and trying to avoid going to my local shop. When i go into protool i am having trouble finding what they are saying needs to be turned off? Thanks for the help.

[Sav.]

Interesting language they decided to use in the instructions.. Cold/Warm?? I would give them a ring and clarify. I am looking at picking a set of these up in the near future, do post some pictures after install!

[Serf27]

Seems straight forward if you’ve used the protools app


These would be the steps with the app
Clock safety from Main menu
Select frm
Click coding
Click edit coding
Click “standard” at the top
Find the cold and warm checks for corner bulbs
Disable both

Find angel eye warm and cold check
Disable both
And click save once done with each step.

Steps For the 12.6 voltage
From the FRM menu:
Click functions
Click Adjust voltages
Select angel eye voltage and move to 12.6v and save.

All this is off the top of my head, it should be exact based on the app layout, if not very similar.

[lnxguy]

Originally Posted by Sav.

Interesting language they decided to use in the instructions.. Cold/Warm?? I would give them a ring and clarify. I am looking at picking a set of these up in the near future, do post some pictures after install!

This is how BMW describes their bulb checks. So yeah, this makes perfect sense.

[Noxz dreams]

How would you do this with bummer code are another free coding app or is it only possible on protool

[TemjinX2]

you can use inpa...i think bimmer code can do it as well in expert mode. i ended up just using protools