[azusuph]

Hi guys
I have been having issues with coding out my error messages using NCS expert. I cant seem to be able to find "read ECU" in NCS expert after I chose the chassis. Many other issues also along the way but long story short, I managed to use NCS dummy to edit the FRM ECU for the bulb of interest and exported the MAN file. The problem now is to get the .MAN file into NCS expert for execution. Does anyone have an idea of how to go about this?

[Tunafish]

Start NCSExpert & Load FSW PSW MAN profile first thing you do.

[azusuph]

Thanks Tunafish I will give that a try and see how it goes.

[ctuna]

Did you get Inpa to Run?
Until you get Inpa functional jobs to read the ecu's
with key's f3 and f4 you should not go on to any type
of coding.

diagnostic manual ista/inpa
https://www.google.com/url?sa=t&rct=...xo19teM9vkTF-C
https://www.google.com/url?sa=t&rct=...7x8H3pN8h1fMuF
https://bimmerprofs.com/diagnostics-inpa-part-1/
https://www.google.com/url?sa=t&rct=...lkXEhlQYy4i9Nb
https://www.bimmerforums.com/forum/s...-P-actually-do
https://www.bimmerfest.com/forums/at...1&d=1590283589
https://www.google.com/url?sa=t&rct=...kBbC27TJLX3BGe
https://www.google.com/url?sa=t&rct=...WekqhcC6hsgK2c
primary links

https://www.e90post.com/forums/showthread.php?t=1681573
https://www.nathansbmwworkshop.com/b...or-dean-videos
ista problems
https://www.e90post.com/forums/showthread.php?t=1661945
https://www.e90post.com/forums/showthread.php?t=1581663