|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Cold Weather Start
|
|
01-23-2013, 07:30 AM | #1 |
Second Lieutenant
39
Rep 223
Posts |
Cold Weather Start
With the cold weather in New England during the winter, is there any additive that I can add to the diesel fuel to prevent it from freezing in the fuel lines? I know that it might not freeze, but turn into a gel like substance.
I was told by BMW SR not to add cetane boost or any diesel additive because it will void my warranty, but how about cold weather additive? I haven't had any issues with starting my 335d in cold weather because I always keep the car garaged where the temp is around 45 degrees. But when I go to work, it sits outside for around 9 hours in 10-20 degree weather. |
01-23-2013, 09:36 AM | #2 |
Curmudgeon and Pedant
692
Rep 3,488
Posts |
As you can see from this: http://www.tdiclub.com/TDIFAQ/TDiFAQ-10.html , CT diesel should be good to -17C (about 1.4F). If you feel the need to go lower, there are many options.
You should also read the recent thread about anti-icing additives: http://www.e90post.com/forums/showthread.php?t=786433 |
Appreciate
0
|
01-23-2013, 11:46 AM | #3 |
Second Lieutenant
39
Rep 223
Posts |
Thanks.
According to the link you provided, I shouldn't worry about my diesel fuel jelling unless it falls below -1.4 degrees. Might be close tomorrow because the temp is suppose to drop to about 8 degrees, but it's still higher than -1.4 degrees. |
Appreciate
0
|
01-23-2013, 12:01 PM | #4 |
Brigadier General
411
Rep 3,051
Posts
Drives: 2009 BMW 335d
Join Date: Jan 2012
Location: Toronto, ON, Canada
|
Here in Toronto when I started my car up at 5:20am it was -19.5 degree Celsius (-3.1 degree Fahrenheit) and the car started with no issues at all.
|
Appreciate
0
|
01-23-2013, 01:25 PM | #5 | |
Lieutenant
122
Rep 541
Posts |
Quote:
How long do you wait after you put the key in? |
|
Appreciate
0
|
01-23-2013, 02:02 PM | #6 |
Brigadier General
411
Rep 3,051
Posts
Drives: 2009 BMW 335d
Join Date: Jan 2012
Location: Toronto, ON, Canada
|
I rarely if ever use the key. I just press the start button.
You can just hold your foot on the brake and hit the start button right off the bat. If the glow plugs are needed then the control unit takes over before cranking the engine. I saw the glow plug for like a split second this morning before it started. |
Appreciate
0
|
01-23-2013, 04:37 PM | #7 | |
Lieutenant
122
Rep 541
Posts |
Quote:
|
|
Appreciate
0
|
01-24-2013, 08:11 AM | #8 |
Enlisted Member
6
Rep 42
Posts |
Yesterday -21C all day, glow plugs light came on for 1 second than start no problem. I don't have Comfort Access and like said above, click the key in, press the brake and push start. If glow plugs are required it will delay the start but I don't have to hold on the start button.
BTW diesel was low at less than 1/8 of the tank (light was on)... |
Appreciate
0
|
01-24-2013, 09:18 AM | #9 | |
Lieutenant
122
Rep 541
Posts |
Quote:
|
|
Appreciate
0
|
01-24-2013, 11:57 AM | #12 |
Curmudgeon and Pedant
692
Rep 3,488
Posts |
|
Appreciate
0
|
Bookmarks |
|
|