Quote:
Originally Posted by Soni
1. Cut the fabric to the size of the trims...(make sure the wave direction are all go same way before you cut, and make sure you leave about 1" longer on all sides of the trims.
Attachment 212272
2. Clean the trims, let it dry and apply the 3M adhesive....Apply 2-3 layers of the adhesive.
Attachment 212273
3. Put the fabric on and use your hand to get all the bubbles out....again make sure the wave are in the correct direction.
Attachment 212274
4. work on all corners by pull and stretch the fabric.
5. cut the vent hole...again leave about 1/2" so that you can wrap the fabric around....you need to cut the 4 corners in order to have the have enough room for the fabric to fold and stick. Add'l info: http://www.e90post.com/forums/showthread.php?t=196996
Attachment 212275
6. apply adhesive all edges and wrap around all edges....sometime you need to let the adhesvie for about 1 minute before they start bonding affect.
Attachment 212276
7. let it sit for 5-8 mins before you double check all edges and corners all
fine. Done!! (During this 5-8 mins wait time, you can work on the other piece.)
Attachment 212277
Attachment 212278
Before you actually glueing, you should pratice stretching and pulling the fabric on the corners before applying glues. This will give you an idea when you actual doing with glue.
Here are some more pics for your reference. Hope these pics can help those who wants to save huge money (save over $300) and decided to DIY.
Attachment 212279
Attachment 212281
Attachment 212280
Attachment 212282
Attachment 212283
You are welcome to PM me if you have any question.
Good luck!!
-Soni |
Has anyone had experience with the longevity of
DIY wrapping? I live in Phoenix and its pretty damn hot in the summer, especially inside a car.
