|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
E9x base audio amp harnesses
|
|
07-09-2023, 03:57 AM | #1 |
New Member
1
Rep 29
Posts |
E9x base audio amp harnesses
Are there any alternative options besides technicpnp? Not sure if they’re out of stock or disco for my car right now. All they have is the underseat version.
|
07-14-2023, 06:06 AM | #3 | |
New Member
0
Rep 5
Posts |
Quote:
I would also like an alternative, or even a wiring diagram showing how to build my own and connector part #'s. I'm fairly certain I know which pins he intercepted or passed-through. |
|
Appreciate
0
|
07-14-2023, 02:31 PM | #5 | |||
New Member
0
Rep 5
Posts |
Quote:
Quote:
https://www.google.com/url?sa=t&rct=...tDpLJPcGkw_ui_ i dug through the WDS, so I think I know which wires Technic connected straight through and which he intercepted to send back to the trunk, but haven't found any posts confirming my homework. or which wire he used to trigger the relay for the remote amp +12v signal. Quote:
Quote:
|
|||
Appreciate
0
|
07-14-2023, 02:44 PM | #6 |
Lieutenant General
1992
Rep 13,281
Posts |
If you have the base system which has no amp an no wiring to the trunk there
is absolutely no reason to have that connector if you are using an aftermarket amp. And there is no reason to use the stock OEM amp no matter which system you have which again brings up the question which system do you have because you never answered that as far as I can see. With the base system you are going to have to run wires to any amp and back to the speakers. The technic harness is to take advantage of the fact that there is already wiring for the Hi Fi option 676 or the Top Hi Fi 677 or 688 which already have wiring all the way to the trunk and it also provides a buffered turn on signal . In the base system the technic harness is just extensions of wires that run to the trunk for inputs and back to the speakers. there is no connector in the trunk in the base system harness from technicpnp for the base system. Also you say nothing of what kind of system you want to build . Which amps ? how many channels? Will you be replacing all the speakers? Will you be adding tweeters? Will you recode the head unit for Hi Fi output. What does mdecoder.com say you have in the 6xx range. Only 2010 to 2011.5 cars had the base radio in the US. All 2007 cars had Hi Fi or Logic 7 in the united states. That is not the base Radio Only 2010 to 2011.5 cars had the base radio in the US. https://technicpnp.com/product/hifi-harness/ If you have Hi Fi 676 is says at his site he has 23 units in stock. No US e9x comes with the base system in 2007. There is only one Hi Fi version or Logic 7 version. Please clairfy which car you actually have by running Mdecoder on the VIN you are making this way to hard. How about you take some pictures of what's in the amp space in your car and publish them here. HiFi (676) harness $75.00 HiFi Harness for E-Chassis models with 6ch OEM amps can be used directly with only balanced-inputs aftermarket amps. Example of direct aftermarket amp replacement for the OEM HiFi amp is the JL Audio XD600/6v2. Alpine PDX amps are balanced-inputs compatible as well.. Use “Y” RCA adapters (not included) for multiple balanced-inputs amps. 23 in stock HiFi (676) harness quantity YOU ARE NOT BEING CLEAR ENOUGH ABOUT WHAT IS ACTUALLY IS IN YOUR CAR OR WHAT KIND OF SYSTEM YOU HAVE . IF YOU HAVE AN 07 those only came with HI FI OR LOGIC 7 Systems. AND YOU DON' T SAY THE EXACT SYSTEM YOU WANT TO ADD. Last edited by ctuna; 07-15-2023 at 02:31 AM.. |
Appreciate
0
|
Bookmarks |
|
|