|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
Caliper adapter fabricator in Sydney
|
|
05-07-2016, 08:40 AM | #1 |
Second Lieutenant
29
Rep 270
Posts |
Caliper adapter fabricator in Sydney
Hi guys, got a set of Brembo BM5 6-piston front 4-piston rear caliper with 380mm front rotors and 350mm rear rotors off a cayenne S that I am planning on fitting to my the e90 but will need some holes on the rotors to be re-drilled to the correct PCD and mod on the caliper adapter to make it fit, tried to search around the forum but couldn't find anything.
Does anyone know where would be a good place to visit in Sydney for this job for good quality that wouldn't cost an arm and leg?
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
|
05-07-2016, 11:41 AM | #2 |
Brigadier General
544
Rep 3,127
Posts
Drives: 2011 335i e92 DCT
Join Date: Sep 2015
Location: Australia, NSW
|
Nice looking brakes, good luck with fitting them
__________________
/ MHD Stage 2+ / AR CATLESS DP / PE MOD 4 INCH TIPS / BMR FMIC / K&N DROP IN / BMS CP / |
Appreciate
0
|
05-07-2016, 04:59 PM | #3 |
Second Lieutenant
29
Rep 270
Posts |
Thanks Elliott!!
Gonna rebuild the seals, clean the pistons and repaint them before going in, any suggestion on what color to paint?? My car is red btw
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
Last edited by WatashiEd; 05-08-2016 at 06:08 AM.. |
Appreciate
0
|
05-07-2016, 08:04 PM | #4 | |
Brigadier General
544
Rep 3,127
Posts
Drives: 2011 335i e92 DCT
Join Date: Sep 2015
Location: Australia, NSW
|
Quote:
Gloss black, bright blue, I'm not too sure, what were you thinking?
__________________
/ MHD Stage 2+ / AR CATLESS DP / PE MOD 4 INCH TIPS / BMR FMIC / K&N DROP IN / BMS CP / |
|
Appreciate
0
|
05-07-2016, 09:14 PM | #6 |
Brigadier General
1499
Rep 3,148
Posts |
Stock rear handbrake won't fit the new discs either
__________________
|
Appreciate
0
|
05-08-2016, 01:38 AM | #9 |
Brigadier General
544
Rep 3,127
Posts
Drives: 2011 335i e92 DCT
Join Date: Sep 2015
Location: Australia, NSW
|
Get some vinyls stickers for them "BMW" and clear coat over the top.https://www.ebay.com.au/ulk/itm/262048818646
__________________
/ MHD Stage 2+ / AR CATLESS DP / PE MOD 4 INCH TIPS / BMR FMIC / K&N DROP IN / BMS CP / |
Appreciate
0
|
05-08-2016, 05:25 AM | #10 |
Private First Class
19
Rep 126
Posts |
|
Appreciate
0
|
05-08-2016, 06:12 AM | #11 | ||
Second Lieutenant
29
Rep 270
Posts |
Quote:
Quote:
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
|
||
Appreciate
0
|
05-08-2016, 06:13 AM | #12 |
Second Lieutenant
29
Rep 270
Posts |
Why's that Vince??
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
|
Appreciate
0
|
05-08-2016, 06:17 AM | #13 |
Brigadier General
1499
Rep 3,148
Posts |
Rear hand brake on a BMW is a drum brake that fits on the inside of the rear disc brake. If you are fitting a completely different disc then the diameter and offset will be different, requiring a new hand brake assembly.
__________________
|
Appreciate
0
|
05-08-2016, 06:18 AM | #14 | |
Second Lieutenant
29
Rep 270
Posts |
Quote:
http://www.e90post.com/forums/showthread.php?t=1223874
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
|
|
Appreciate
0
|
05-08-2016, 06:19 AM | #15 |
Second Lieutenant
29
Rep 270
Posts |
I thought about that!! But bugger my body is red....
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
|
Appreciate
0
|
05-08-2016, 06:21 AM | #16 | |
Second Lieutenant
29
Rep 270
Posts |
Quote:
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
|
|
Appreciate
0
|
05-08-2016, 06:24 AM | #17 |
Second Lieutenant
29
Rep 270
Posts |
Forgot to mention, I got it cheap, $2k for the whole set including calipers, rotors, braided lines, DS2500 pads, winning
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
|
Appreciate
0
|
05-08-2016, 06:28 AM | #18 |
Lieutenant Colonel
182
Rep 1,543
Posts |
|
Appreciate
0
|
05-08-2016, 06:30 AM | #19 | |
Second Lieutenant
29
Rep 270
Posts |
Quote:
So what handbrake will needed to be fitted in for the job Vince??
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
|
|
Appreciate
0
|
05-08-2016, 06:30 AM | #20 |
Lieutenant Colonel
182
Rep 1,543
Posts |
|
Appreciate
0
|
05-08-2016, 06:32 AM | #21 |
Second Lieutenant
29
Rep 270
Posts |
Yea I know, in pretty good condition too, except the funny green color, can't complaint actually hehehehe
__________________
Sapphire Black M4 | iPE - Valvetronic exhaust | VRSF 3″ catless dp | Bootmod 3 Stage 2 | OEM LED alcantara steering wheel | OEM M4 GTS CF hood | Vorsteiner GT wing | M Performance CF splitter | Vorsteiner CF front lip | M Performance CF side skirt extension | 3D CF diffuser | OEM CF mirror cap | H&R lower spring | Rays Engineering TE37 Ultra Bronze 20x10F 20x11R
|
Appreciate
0
|
05-08-2016, 06:33 AM | #22 |
Lieutenant Colonel
182
Rep 1,543
Posts |
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|