[hsgrewal]

Hi, First time poster.

I've got a 2009 335 x-drive coupe with KWV1 coil overs with rear fenders rolled.

I'm looking to put on a set of 19" rims in silver/black but want to make sure that the rims/tires don't rub.

I would like to run a square set of 19x9 bremmer BR05 all around but tirerack.com is saying that 19x9 with 34mm offset will rub in the front. Any experience running a square setup?

I have a set of 4 245/35R19 tires I'd like to run on a set of new rims...any ideas on which set of rims I should be looking at to prevent rubbing etc?

If I run a staggered VMR rim setup, can I still use the above tires without any harm to the x-drive system?

Thanks!

[zipstic]

IIRC someone is running 265's in front...but don't quote me on that.

You can run staggered wheels with square tires without any harm to the x-drive system. Many people run a staggered wheel and tire setup.

[nosmo72]

I run a staggered setup on my 08 e92 335xi. I'm running VMR v710s 19x8.5 rim and 235/35/19 tires up front and a 19x9.5 rim and 265/30/19 tires in the rear. No fender roll and no rubbing. I don't have it lowered yet but I plan on getting KW V1s in the not too distant future. The ride height on the xi is brutal.

Hit up the wheels and tires section of the forum.

http://www.e90post.com/forums/forumdisplay.php?f=12

You input a tire setup and see how many millimeters you loose on the strut side and how much it will extend on the outside. As long as you stay within 1% difference you'll be fine with the xdrive.

[hsgrewal]

Awesome. Thanks guys.

[hsgrewal]

Does anyone have experience running a 19x9 with 34mm offset all around?