E90Post
 


The Tire Rack
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > DIY Guides > DIY E90 N54 Valve Cover Gasket



Reply
 
Thread Tools Search this Thread
      06-18-2013, 08:03 PM   #45
cstmx_ryder
Colonel
cstmx_ryder's Avatar
United_States
164
Rep
2,875
Posts

Drives: A metal box with a roundel
Join Date: Jul 2007
Location: Portland, OR

iTrader: (2)

So I will probably have to do this soon.....When I was at the alignment shop, they did a quick inspection while the car is up in the air, and found oil drops on my wastegate and my downpipes. They suspect it's the valve cover gasket leaking, which would explain my excessive oil usage, had to top off twice between my oil changes (every 6-7k miles). Does that diagnosis sound about right?

Also, I have an OCC, so is there an extra/less steps to change the VCG with an OCC?

TIA
__________________

'08 AW E90 335i
PROcede V5 | BMS DCI | RR DPs | ETS FMIC | FORGE DVs | Stett CP | Vanguard | PSS10
Appreciate 0
      06-19-2013, 12:22 PM   #46
Googie
Irish
Googie's Avatar
United_States
35
Rep
100
Posts

Drives: 07 335i, 2016 X5, Jeep JKU
Join Date: Jan 2008
Location: Ft. Lauderdale

iTrader: (0)

Quote:
Originally Posted by Googie View Post
So I had my valve cover gasket done at a shop and the guy told me after that he did the torque at 10. Is that bad? Should I be worried? I just got it done so can the torque be adjusted back to 7 - 7.5?
I had the valve cover gasket done back in March and it looks like its leaking again. Maybe they Torqued it too much and a bolt broke? It was good for a few months. Could there be something causing it to go bad? I am bringing it back to the indy shop so hopefully they can get it right this time and hopefully they don't try to charge me more $$
Appreciate 0
      07-01-2013, 02:01 PM   #47
bergman
New Member
0
Rep
6
Posts

Drives: 2008 335I Convertible
Join Date: Jul 2011
Location: Toronto

iTrader: (0)

Quote:
Originally Posted by robc1976 View Post
No need for it, just dont put the socket on ratchet all the way and it elk reach just fine.
Hey i understand what you are saying, however how long was you socket, to get my socket to get on the bolt, there no way i can even partially get my ratchet onto the socket. Please advise, i am currently stuck here lol
Appreciate 0
      07-01-2013, 07:10 PM   #48
robc1976
DIYER
robc1976's Avatar
609
Rep
5,521
Posts

Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

iTrader: (14)

Quote:
Originally Posted by bergman View Post
Hey i understand what you are saying, however how long was you socket, to get my socket to get on the bolt, there no way i can even partially get my ratchet onto the socket. Please advise, i am currently stuck here lol
Normal deep well socket and a extension.
__________________
JB4 G5, Stage 3 LPFP, Stage 2 MOTIV PI, VM 6466 ST, Custom OCC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2, DEFIV kit, KW clubsport, Delrin solid SF bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, M3 fenders, M3 OEM sideskirts, Mtech rear bumper, CSL trunk, MORR VS8.2 rims 245/295
Appreciate 0
      07-04-2013, 09:18 AM   #49
bergman
New Member
0
Rep
6
Posts

Drives: 2008 335I Convertible
Join Date: Jul 2011
Location: Toronto

iTrader: (0)

Quote:
Originally Posted by robc1976 View Post
Very good point actually, I have a occ so I just removed the hose and not he check valve. I thought about using a gasket sealer but did not want to clog the tiny air ways in the head.
how do you remove the pcv connection, i tried removing the hose but cant get it off. thanks
Appreciate 0
      07-04-2013, 11:47 AM   #50
robc1976
DIYER
robc1976's Avatar
609
Rep
5,521
Posts

Drives: E90 335i
Join Date: Mar 2012
Location: Illinois

iTrader: (14)

Quote:
Originally Posted by bergman View Post
how do you remove the pcv connection, i tried removing the hose but cant get it off. thanks
it is a squeeze to remove fitting. It sucks to get off man...hate it.
__________________
JB4 G5, Stage 3 LPFP, Stage 2 MOTIV PI, VM 6466 ST, Custom OCC W/ SS lines, ER FMIC, ER CP W/HKS BOV, M3 control arms, M3 guide rods, M3 upper links, M3 front & rear sway-bars, HPA rear toe arms, Wavetrac LSD, HPF Gen 2, DEFIV kit, KW clubsport, Delrin solid SF bushings, stoptech rotors, Rogue Tranny Mounts, 1M bumper, M3 CF hood, M3 fenders, M3 OEM sideskirts, Mtech rear bumper, CSL trunk, MORR VS8.2 rims 245/295
Appreciate 0
      08-20-2013, 03:31 PM   #51
MAK3N3
Private
MAK3N3's Avatar
United_States
9
Rep
75
Posts

Drives: E36, E70, E90
Join Date: Dec 2009
Location: Houston

iTrader: (2)

Nice write up - will be ordering parts and attempting this soon - I just recently noticed a burning oil smell and upon further inspection found some oil leaking onto the deflector and dripping down onto the exhaust pipes...hopes the gasket is all I need!
Appreciate 0
      08-21-2013, 02:45 PM   #52
jbarber0020
Private First Class
jbarber0020's Avatar
13
Rep
154
Posts

Drives: 2011 E90 M3
Join Date: Feb 2013
Location: Virginia

iTrader: (3)

For anyone who did this, how long did it take start to finish... including putting everything back together?

Thanks!
__________________

2011.75 E90 M3 ZCP
Jet Black, LUX Angel Eyes, Borla ATAK Exhaust, Powdercoated ZCP wheels
Appreciate 0
      08-21-2013, 04:55 PM   #53
TexE90
Banned
10
Rep
134
Posts

Drives: 2007 335i E90
Join Date: Nov 2012
Location: United States

iTrader: (1)

Took about 4 hours doing it carefully. And when you go to torque in the valve cover bolts, GO SLOW and don't go a ft-lb over 8 or you'll be sorry.

To take off the PCV connection, I used 3 BBQ skewers and a flathead screwdriver. You have to pry in 4 spots to get it off. It sucks. You will likely just break it anyways so get ready to dish out $25 for a new one.
Appreciate 0
      09-20-2013, 02:15 PM   #54
Jklad
Lieutenant Colonel
Jklad's Avatar
United_States
421
Rep
1,643
Posts

Drives: 2007 335i Coupe
Join Date: Nov 2010
Location: Palatine, IL

iTrader: (0)

Quick questions:
1 - it looks like the spark plugs were left in the engine- is this correct, or do they have to be removed at some point

2- is there anything else that should be cleaned and/or make sense to repair at the same time, since you're already removing a bunch of stuff here anyways? e.g. the hpfs (high pressure fuel sensor) or anything else?

Thanks!
Appreciate 0
      09-22-2013, 05:46 PM   #55
TeutonicFlight
Keepin It Real
TeutonicFlight's Avatar
United_States
35
Rep
563
Posts

Drives: E92 crew
Join Date: Nov 2007
Location: At the beach

iTrader: (6)

Blue and single torque bolts do break !

Quote:
Originally Posted by Jklad View Post
Quick questions:
1 - it looks like the spark plugs were left in the engine- is this correct, or do they have to be removed at some point

2- is there anything else that should be cleaned and/or make sense to repair at the same time, since you're already removing a bunch of stuff here anyways? e.g. the hpfs (high pressure fuel sensor) or anything else?

Thanks!
Ditto
Helped out perfectly
I from my own experience now would replace the special alum bolts (26)
@ $4 a pop as its a low torque of 7.4 but they snap like single use torque once type bolts to me. Or I'm just a monster with too heavya hand even w 1/4"
Setup
I got the stud out easily tho , fortunately I mean lol

Rock on !


Attached Images
 
__________________

Never Mistake Activity for Achievement
Parking lots
C Mod
84'

Last edited by TeutonicFlight; 09-22-2013 at 05:59 PM.. Reason: Adding ratings
Appreciate 0
      09-24-2013, 03:08 PM   #56
mi_bimmer
Private
2
Rep
56
Posts

Drives: 2006 325i E90 N52
Join Date: Dec 2012
Location: SE Michigan

iTrader: (0)

Looked under the hood today and found oil leaking all around the valve cover. Probs needs a new gasket.
Btw, I found a good DIY video for replacing the VCG on an N52 engine

Appreciate 0
      10-10-2013, 11:04 PM   #57
vr6extreme
Enlisted Member
United_States
12
Rep
46
Posts

Drives: 2013 X5m FBO 2007
Join Date: Sep 2013
Location: Louisville,ky

iTrader: (0)

Spark plug guide sleeves

Do not leave them in the valve cover. They are meant to be pushed down in after you install the valve cover. This will keep most novice mechanics from bending them during reinstalation.
Appreciate 1
      12-11-2013, 09:54 AM   #58
bergman
New Member
0
Rep
6
Posts

Drives: 2008 335I Convertible
Join Date: Jul 2011
Location: Toronto

iTrader: (0)

Quote:
Originally Posted by Googie View Post
I had the valve cover gasket done back in March and it looks like its leaking again. Maybe they Torqued it too much and a bolt broke? It was good for a few months. Could there be something causing it to go bad? I am bringing it back to the indy shop so hopefully they can get it right this time and hopefully they don't try to charge me more $$
Hey what was the cause of it leaking again, mine looks like its leaking again as well
Appreciate 0
      12-29-2013, 07:53 AM   #59
E902F30
Enlisted Member
5
Rep
42
Posts

Drives: 2012 335i Black/Black Sport
Join Date: Mar 2011
Location: USA

iTrader: (0)

Well.....I just finished this so I thought I would throw in my observations:
1. Thanks for the excellent DIY. I would not even have attempted to do this without the write-up.
2. My car is a 2008 335i with 115K miles on the clock. All of the plastic under the hood is very brittle. I broke several fitting even being very careful. Be prepared! I broke the PCV hose on the back of the manifold (replaced it with some reinforced rubber hose from the parts store. Had to cut the plastic hose off to make it work). I also broke the fitting where the two small vac. lines attach. I ended up repairing this one, cutting off the rubber lines with the cloth covers and replacing the lines with rubber hose from the parts store (5/32" vac. line). I also broke several clips (replaced those with zip ties).
3. My 10mm deep well socket would not go over the ground posts due to an inside "shoulder" in the socket. I put the socket on the drill press and opened it up slightly and then it worked fine.
4. Most of my leak appeared to be coming from the oil filter housing and the oil cooler adaptor. I replaced both of those gaskets while I was doing the valve cover.
5. I found it much easier to insert the spark plug guides after putting the valve cover back on.
6. My car purged the cooling system all by itself????? I did not have to hold the pedal down, it just started up on its own????
7. If you drain the cooling system by pulling that lower hose on the aluminum cooler like I did, you might see if the O-ring is available. Mine was dripping when I finished but seems to have sealed itself for now. You might have to get the entire hose so.......
8. It probably took at least 12 hours but that includes the oil filter mount and the oil cooler adaptor (get the two O-rings if you are taking the oil lines off). That also included repairing the things I broke.
9. I replaced the bolts but I can't see why that's necessary with such low torque.
10. When I started my car I got all kinds of errors about the brakes and traction control. The engine started but the throttle would not work and the engine revved up and down on its own. Turns out I left the clip off what I assume is the cam position sensor (right on the front of the head near the oil filter mount). Plugged it back in and all was well.
11. Saved $1500+ by doing this myself. It was a pain but it was well worth it in the end.
Appreciate 2
      01-10-2014, 01:47 PM   #60
htm99a
Registered
0
Rep
2
Posts

Drives: BMW 135i M-Sport
Join Date: Nov 2013
Location: Sydney, Australia

iTrader: (0)

For those using this guide for the E82/88 series it looks like the correct torque for the 26 valve cover bolts is 8.5nm which is between 6 and 6.5 lb/ft.

http://workshop-manuals.com/bmw/1_se...ad_with_cover/

No idea why it would be different torque to the 3 series... Same engine and all....
Appreciate 0
      01-10-2014, 01:51 PM   #61
TeutonicFlight
Keepin It Real
TeutonicFlight's Avatar
United_States
35
Rep
563
Posts

Drives: E92 crew
Join Date: Nov 2007
Location: At the beach

iTrader: (6)

Just don't break any !) bummers ville if they snap ...

Quote:
Originally Posted by htm99a View Post
For those using this guide for the E82/88 series it looks like the correct torque for the 26 valve cover bolts is 8.5nm which is between 6 and 6.5 lb/ft.

http://workshop-manuals.com/bmw/1_se...ad_with_cover/

No idea why it would be different torque to the 3 series... Same engine and all....
Appreciate 0
      01-18-2014, 11:23 AM   #62
tys90
Private First Class
8
Rep
128
Posts

Drives: 2013 535i xDrive
Join Date: Apr 2009
Location: Midwest US

iTrader: (0)

Okay, I'm stuck. There is a step missing in the guide. I cannot for the life of me figure out how to remove the connector you see in step 14. Here is what I'm talking about:
Attached Images
 
Appreciate 0
      01-18-2014, 11:42 AM   #63
TeutonicFlight
Keepin It Real
TeutonicFlight's Avatar
United_States
35
Rep
563
Posts

Drives: E92 crew
Join Date: Nov 2007
Location: At the beach

iTrader: (6)

Quote:
Originally Posted by jbarber0020
For anyone who did this, how long did it take start to finish... including putting everything back together?

Thanks!
It took me maybe 3 hours of careful work. Careful meaning cautious not to break or drop anything in to the motor. The plastics get brittle with age and heat - normal for these cars. Just
Use caution and plenty of light !
__________________

Never Mistake Activity for Achievement
Parking lots
C Mod
84'
Appreciate 0
      01-18-2014, 11:47 AM   #64
TeutonicFlight
Keepin It Real
TeutonicFlight's Avatar
United_States
35
Rep
563
Posts

Drives: E92 crew
Join Date: Nov 2007
Location: At the beach

iTrader: (6)

Quote:
Originally Posted by tys90
Okay, I'm stuck. There is a step missing in the guide. I cannot for the life of me figure out how to remove the connector you see in step 14. Here is what I'm talking about:
Squeeze hard and pull apart firmly ?
__________________

Never Mistake Activity for Achievement
Parking lots
C Mod
84'
Appreciate 0
      01-18-2014, 01:26 PM   #65
tys90
Private First Class
8
Rep
128
Posts

Drives: 2013 535i xDrive
Join Date: Apr 2009
Location: Midwest US

iTrader: (0)

Quote:
Originally Posted by Zundefolge View Post
Squeeze hard and pull apart firmly ?
I ended up taking it off at the other end of the connector and leaving the tube connected to the valve cover. Everything removed and working on cleaning it now.
Appreciate 0
      01-18-2014, 01:39 PM   #66
TeutonicFlight
Keepin It Real
TeutonicFlight's Avatar
United_States
35
Rep
563
Posts

Drives: E92 crew
Join Date: Nov 2007
Location: At the beach

iTrader: (6)

Quote:
Originally Posted by tys90
Quote:
Originally Posted by Zundefolge View Post
Squeeze hard and pull apart firmly ?
I ended up taking it off at the other end of the connector and leaving the tube connected to the valve cover. Everything removed and working on cleaning it now.
Cool
__________________

Never Mistake Activity for Achievement
Parking lots
C Mod
84'
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:20 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST