[j1gilles]

-Updated Wedge flash loaded... Car pulled hard but my low pressure pump doesn't seem to be happy with my e85 mix.

http://www.datazap.me/u/j1gilles/wed...7-18&zoom=0-44

[kjohnson949]

What kind of issues where you experiencing with the car what was It doing? Im also running an e30 wedge flash my car seems to pull hard and all the time. But never done logs or anything so not sure if have any hidden issues. Im a newbie to a lot of this.

[Digitalism]

You really should be logging if you are running any type of flash.

Running a custom flash without logging is asking for trouble.

[j1gilles]

Originally Posted by kjohnson949

What kind of issues where you experiencing with the car what was It doing? Im also running an e30 wedge flash my car seems to pull hard and all the time. But never done logs or anything so not sure if have any hidden issues. Im a newbie to a lot of this.

I use the JB4 bluetooth iPhone app so I watch things real time but as mentioned above you really should pull a few logs just to make sure things are kosher...

When I look at a log I check a few things; I make sure I am hitting my boost target, I check ign advance to look for timing "pulls", average ign should be close to zero and not increase during the pull, A/F ratio should "fatten up" as the RPM's climb and not be too lean, trims shouldn't max out and the LPFP needs to stay above the low 50's. There are plenty of guys on this forum that are much more advanced at reading logs so post one up! Ken (Wedge) always likes you to email him a log as well... Take care!

[kjohnson949]

Thanks for the help and info I appreciate. I'll be jumping on that this weekend for sure.

[j1gilles]

Originally Posted by Digitalism

You really should be logging if you are running any type of flash.

Running a custom flash without logging is asking for trouble.

+1
I monitor "live" values with my JB4 iPhone app.. It is pretty sweet