[Jeef]

Originally Posted by Eurocraze

time to put the stockers back on and smog. thats what i had to do... well until i didnt have to smog anymore.

What happened?

[joeinsd]

Originally Posted by Slammed3

You can try calling shops and asking if they can help, if you haven't already. Some will for a fee. I'm stock, so I can't make a recommendation. Good luck!

Come on now.. no shop will straight out tell you they can help with passing smog with aftermarket, non CARB approved parts. They don't want their shop getting shut down. It takes knowing someone that knows someone to get that done and you better be ready to "tip" real good.

[Robbie135]

Originally Posted by AMG_KLR

Two things;
First- Anyone over in the Temecula/Murrieta area?
Second-Anyone selling a set of ForgeStar F14 wheels? I want to sell my 19' Avant Garde M550 wheels and get forgestar F14's instead

Iam!

[335iSanDiego]

Hello All,

I have possibly 3 oil leaks coming from my 2008 335i.
1. Valve Cover Gasket.
2. Oil Filter Housing gasket.
3. lower pan gasket.

Any recomendations on a good shop with good pricing? Suggestions and ideas. Normally im pretty good at diys, but this time i dont have the time or the place to do it. And my funds are low.. at least not enough for the quotes i recieved from the 2 shops i called. But if anyone knows of a great deal & great San Diego location. Im open to advice and suggestions.

Thanks!
Nick

[joeinsd]

Originally Posted by 335iSanDiego

Hello All,

I have possibly 3 oil leaks coming from my 2008 335i.
1. Valve Cover Gasket.
2. Oil Filter Housing gasket.
3. lower pan gasket.

Any recomendations on a good shop with good pricing? Suggestions and ideas. Normally im pretty good at diys, but this time i dont have the time or the place to do it. And my funds are low.. at least not enough for the quotes i recieved from the 2 shops i called. But if anyone knows of a great deal & great San Diego location. Im open to advice and suggestions.

Thanks!
Nick

Try reaching out to Jeef . He has a shop in Esco and is my go-to guy. In fact, I just picked my car up from this afternoon from getting my stage 2 lpfp installed, brake fluid flush and vacuum lines replaced.

[codinge90]

Anyone have a 335i muffler (n54 or n55 is fine) that they can sell me tomorrow? Need it urgently

[335iSanDiego]

Originally Posted by joeinsd

Try reaching out to Jeef . He has a shop in Esco and is my go-to guy. In fact, I just picked my car up from this afternoon from getting my stage 2 lpfp installed, brake fluid flush and vacuum lines replaced.

HeyJeef! if you are out there.. Ive heard good things. Any recommendations? i ended up getting the VCG and the OHFG done. But i still need the bottom pan done ... plus a looong list of other repairs.
Any help would be greatly appreciated!

[Jeef]

Originally Posted by 335iSanDiego

HeyJeef! if you are out there.. Ive heard good things. Any recommendations? i ended up getting the VCG and the OHFG done. But i still need the bottom pan done ... plus a looong list of other repairs.
Any help would be greatly appreciated!

Hey. Send me a text (858) 683-3070

[codinge90]

Hi everyone, wanted to make a post to offer coding in San Diego since I know there aren't a whole lot of coders in the area anymore. You can shoot me a PM if you are looking to get something done, I am Mobile well so if you are close by I can go to you or meet in the middle. My pricing is $50 for unlimited coding options. Please don't hesitate to shoot me a PM to ask any questions!

In about a month or 2 I will be offering Flashes as well (alpina, GTS, etc) as well as more extensive coding for retrofits.

[arod221]

Originally Posted by joeinsd

Try reaching out to Jeef . He has a shop in Esco and is my go-to guy. In fact, I just picked my car up from this afternoon from getting my stage 2 lpfp installed, brake fluid flush and vacuum lines replaced.

i second and third this post...Jeef is a solid mechanic with completely reasonable pricing for sure.

[Bimmer335i]

Hey guys/gals,
Any of you not using the OEM front license plate holder that you may want to get rid of? I'll be happy to get it off your hands. See pic below. Thanks.

[joeinsd]

FS: Bmw License Plate Bracket http://www.e90post.com/forums/showthread.php?t=1394248

[BMWfromSD]

Anyone need pre-lci front and rear bumpers in jet black for free? I got them...also three stock rims

[Jeef]

Originally Posted by BMWfromSD

Anyone need pre-lci front and rear bumpers in jet black for free? I got them...also three stock rims

Sedan or coupe

[samsamwu]

Anyone have 1 rim they want to dump, damaged or not, any size, thanks

[samsamwu]

Any recommendations for someone to plastidip rims and window trim?

[joeinsd]

Plastidip is really easy to do yourself. I just used it to spray some household stuff last week. I wouldn't pay someone to plastidip. You might also want to consider wrapping your trim instead. Plastidip looks very budget because it's not smooth.

[phantasticphan]

Originally Posted by joeinsd

Plastidip is really easy to do yourself. I just used it to spray some household stuff last week. I wouldn't pay someone to plastidip. You might also want to consider wrapping your trim instead. Plastidip looks very budget because it's not smooth.

Agreed, especially when it starts peeling, it just looks cheap

[E90SDGUY]

Originally Posted by samsamwu

Anyone have 1 rim they want to dump, damaged or not, any size, thanks

Hey I have 3 VMR size 18 if you are interested.

[SoCalR]

Anyone have any recommendations on where to get an alignment? I'm thinking about taking my car to Clarence Brown, but I wanted to see where everyone else is going. Has to be lowered friendly.

[phantasticphan]

Originally Posted by SoCalR

Anyone have any recommendations on where to get an alignment? I'm thinking about taking my car to Clarence Brown, but I wanted to see where everyone else is going. Has to be lowered friendly.

I'm looking for the same thing!

[Jeef]

How low are you guys?

Do you need a place with the rack in the ground?