[Sensible_]

Originally Posted by sfarisbradistan

If I order the cable etc, can you code it and how much do you charge? Thanks

Of course.

PM me and I'll help you.

[manny.p]

Is there by one near Coventry who can do some coding and light resetting. Many thanks manny

[JP117]

I'm located in the South West, Bristol area.
I can do standard coding via my OBD port but I'm looking for someone who could update my CIC iDrive firmware to a more recent revision as I do not have a ICOM/OPS unit or suitable power supply.

PM me if you can help

[sfarisminhas]

Originally Posted by Sensible_

Of course.

PM me and I'll help you.

Is this the one I need?
https://www.bimmergeeks.net/product-...eeks-pro-cable

And which software do I need to download from here?

https://www.bimmergeeks.net/downloads

[sfarisminhas]

Originally Posted by manny.p

Is there by one near Coventry who can do some coding and light resetting. Many thanks manny

Guys, not sure about Coventry but there is a gentleman in Birmingham who does coding. I just had my professional headunit coded for USB/iPod had the cd changer coded and had the digital speedo coded today. Can't thank him enough. Search for him on eBay and book through that. He goes by the name of Navtvman. Not sure if he's on this forum or not but really knows what he's doing. Contact him through the following link and book in to have your coding needs sorted.

https://rover.ebay.com/rover/0/0/0?m...2F283459812283. Excellent service.

[Rush 335i]

Hi guys I'm looking for someone to code the alpine upgrade to a professional head unit (non nav 08 car), anyone available to do it next week?

Tia

[sfarisminhas]

Originally Posted by Rush 335i

Hi guys I'm looking for someone to code the alpine upgrade to a professional head unit (non nav 08 car), anyone available to do it next week?

Tia

Originally Posted by Rush 335i

Hi guys I'm looking for someone to code the alpine upgrade to a professional head unit (non nav 08 car), anyone available to do it next week?

Tia

Get in touch with the chap I quoted above. He is known as NAVTVMAN and is based in Birmingham. Had my professional unit coded for USB and HIfi

[stevesingo]

Hi all,

I'm in need of some help. I need to re-flash my DSC, Airbag and FRM modules. I updated the VIN on the units, but that caused them to drop their software and I'm unable to get my NCS expert (downloaded from Bimmergeeks) to re-flash them. I keep getting a VIN incorrect message.

Is there anyone in the South Cumbria North Lancs region who could do this for me. Or, point me in the direction of a good quality BMW Tools download and give me an iddiots guide?

Any help appreciated, otherwise it is the dealer for an Integration Level re-flash.

[Sensible_]

Originally Posted by stevesingo

Hi all,

I'm in need of some help. I need to re-flash my DSC, Airbag and FRM modules. I updated the VIN on the units, but that caused them to drop their software and I'm unable to get my NCS expert (downloaded from Bimmergeeks) to re-flash them. I keep getting a VIN incorrect message.

Is there anyone in the South Cumbria North Lancs region who could do this for me. Or, point me in the direction of a good quality BMW Tools download and give me an iddiots guide?

Any help appreciated, otherwise it is the dealer for an Integration Level re-flash.

Just replied to you in the coding section...

[numskull90]

Hi All

The CD73 Professional Radio in my 2009 E92 failed, BMW quoted £700 so I picked one up of ebay for £80. The replacement works fine all apart from parking sensors, there is just no chime or noise from them.

Took into BMW, they charged a pretty penny to diagnose, said the sensors are all working ok and it was due to the second hand head unit but said they couldn't code it... Is this because they physically can't or just wont?

Is there anyone near Cambridge that I could run the car over too and get it coded?

Or anyone that could suggest what I need to buy to do it myself? I have found a few places to download the software just unsure on what adapter i need, the ones on ebay seem to only work on the E92's before 2007.

Many thanks

Matt

[Sensible_]

Originally Posted by numskull90

Hi All

The CD73 Professional Radio in my 2009 E92 failed, BMW quoted £700 so I picked one up of ebay for £80. The replacement works fine all apart from parking sensors, there is just no chime or noise from them.

Took into BMW, they charged a pretty penny to diagnose, said the sensors are all working ok and it was due to the second hand head unit but said they couldn't code it... Is this because they physically can't or just wont?

Is there anyone near Cambridge that I could run the car over too and get it coded?

Or anyone that could suggest what I need to buy to do it myself? I have found a few places to download the software just unsure on what adapter i need, the ones on ebay seem to only work on the E92's before 2007.

Many thanks

Matt

A decent DCAN cable can code it. The best cable is from Bimmer Geeks.

Or you could get their 'Pro Tool' app and go that route.

BMW could code it. But a dealer probably wouldn't know how to be honest. This scenario isn't something they'd routinely do.

[sfarisminhas]

Originally Posted by numskull90

Hi All

The CD73 Professional Radio in my 2009 E92 failed, BMW quoted £700 so I picked one up of ebay for £80. The replacement works fine all apart from parking sensors, there is just no chime or noise from them.

Took into BMW, they charged a pretty penny to diagnose, said the sensors are all working ok and it was due to the second hand head unit but said they couldn't code it... Is this because they physically can't or just wont?

Is there anyone near Cambridge that I could run the car over too and get it coded?

Or anyone that could suggest what I need to buy to do it myself? I have found a few places to download the software just unsure on what adapter i need, the ones on ebay seem to only work on the E92's before 2007.

Many thanks

Matt

Originally Posted by numskull90

Hi All

The CD73 Professional Radio in my 2009 E92 failed, BMW quoted £700 so I picked one up of ebay for £80. The replacement works fine all apart from parking sensors, there is just no chime or noise from them.

Took into BMW, they charged a pretty penny to diagnose, said the sensors are all working ok and it was due to the second hand head unit but said they couldn't code it... Is this because they physically can't or just wont?

Is there anyone near Cambridge that I could run the car over too and get it coded?

Or anyone that could suggest what I need to buy to do it myself? I have found a few places to download the software just unsure on what adapter i need, the ones on ebay seem to only work on the E92's before 2007.

Many thanks

Matt

Are your rear speakers connected mate. Had the same issue. Once I connected up the rear speakers, hey presto, the PDC started to work.

[Sparky68]

Anyone able to code a F20 m135i , fitting a 10.25 screen and ecu needs to think it previously had a pro nav screen [ 8"]

[Sensible_]

Originally Posted by Sparky68

Anyone able to code a F20 m135i , fitting a 10.25 screen and ecu needs to think it previously had a pro nav screen [ 8"]

It's easy to do. All you need is a cheap enet cable. Download esys. Probably Carly or Pro Tool can do it aswell.

[numskull90]

Originally Posted by Sensible_

A decent DCAN cable can code it. The best cable is from Bimmer Geeks.

Or you could get their 'Pro Tool' app and go that route.

BMW could code it. But a dealer probably wouldn't know how to be honest. This scenario isn't something they'd routinely do.

Cheers, I bought one from Amazon came next day and came with software, followed a tutorial on youtube and managed to code it. Parking sensors are working again!

[M3NickM3]

Can anyone activate the navigation on an e92?

Its a replacement cic, vin number has been added to the box, but rejects the fsc codes, and navigation is still greyed out.

I am in London

[billabong02]

Hi All,

I've just bought my first ever BMW, It's a 2010 3 Series 320i Business Edition E90 and I absolutely love it. I have a question about it's iDrive system specifically the bluetooth audio streaming, I've read in various places that pre 2011 E90s can't stream audio via bluetooth and I certainly can't seem to do it in mine but I can make phone calls, etc. What's the best way to get bluetooth audio streaming without using an external transmitting device via aux? Can coding fix this problem? or do I need to replace something?

Thanks,
Billy

[CMOSUK]

Any coders in Glasgow?

[DrewM.]

Essex/London/Remote coders please get in touch, either here, or, via PM.

Cheers.

[Junfengleung]

Hey guys, any coders in Manchester? I'd like to code my battery and reset service light please. Hit me up in PM or maybe send a text to my No. 07450587719

Chow babies

[Karlos20945]

Originally Posted by billabong02

Hi All,

I've just bought my first ever BMW, It's a 2010 3 Series 320i Business Edition E90 and I absolutely love it. I have a question about it's iDrive system specifically the bluetooth audio streaming, I've read in various places that pre 2011 E90s can't stream audio via bluetooth and I certainly can't seem to do it in mine but I can make phone calls, etc. What's the best way to get bluetooth audio streaming without using an external transmitting device via aux? Can coding fix this problem? or do I need to replace something?

Thanks,
Billy

I’ve got a very similar car to you. My understanding is that if you want Bluetooth streaming for music, you need to retrofit Combox. No idea how much that would set you back. I’m currently using a little Bluetooth thing the size of a matchbox, plugged into the aux port in the centre arm rest to play music from my iPhone.

I don’t suppose there’s anyone in the Basingstoke area that could code a couple of little things for me?

[Mojo11BMW]

Anyone coding in Cambridgeshire area? Peterborough specifically. Have an E92 with SOS Call System Failure warning light.