Outlet Charge Pipe

Viking.dk · 03-13-2020, 08:46 PM

Looking for best N54 Aluminum Turbo Outlet Charge Pipe for my E91. By best I mean, best performance🏎 and best fit

mweisdorfer · 03-14-2020, 07:32 AM

Quote:

Originally Posted by Viking.dk

Looking for best N54 Aluminum Turbo Outlet Charge Pipe for my E91. By best I mean, best performance🏎 and best fit

Look at VRSF

Jeef · 03-14-2020, 09:15 AM

if you can get PSP get that one.

type-dRew · 03-14-2020, 09:55 AM

Quote:

Originally Posted by Jeef

if you can get PSP get that one.

gonna need to beg borrow or steal for that one, he is done making parts

Jeef · 03-14-2020, 10:30 AM

Quote:

Originally Posted by type-dRew

Quote:

Originally Posted by Jeef

if you can get PSP get that one.

gonna need to beg borrow or steal for that one, he is done making parts

isn't he making for another platform now? I have one outlet left from them that I'm holding on to...

type-dRew · 03-14-2020, 10:52 AM

Quote:

Originally Posted by Jeef

isn't he making for another platform now? I have one outlet left from them that I'm holding on to...

afaik hes just out of the e90 game

said too much cheap shit making it impossible for him to sell quality parts

Rule1977 · 03-14-2020, 11:14 AM

Quote:

Originally Posted by Viking.dk

Looking for best N54 Aluminum Turbo Outlet Charge Pipe for my E91. By best I mean, best performance🏎 and best fit

https://x-ph.com/vrsf-n54-aluminum-t...9-e90-e92-e60/

VRSF is the way to go and it's on sale right now at Extreme Powerhouse.

Viking.dk · 03-14-2020, 06:57 PM

Quote:

Originally Posted by Jeef

if you can get PSP get that one.

Have noticed PSP when I have been looking around. It's a great piece of work. Sad I can't get one

nicky dj · 03-14-2020, 07:49 PM

Love my Evolution Racewerks CP

Rule1977 · 03-14-2020, 08:24 PM

Quote:

Originally Posted by Viking.dk

Quote:

Originally Posted by Jeef

if you can get PSP get that one.

Have noticed PSP when I have been looking around. It's a great piece of work. Sad I can't get one

Did PSP go out of business?

Viking.dk · 03-14-2020, 09:50 PM

Quote:

Originally Posted by Rule1977

Quote:

Originally Posted by Viking.dk

Quote:

Originally Posted by Jeef

if you can get PSP get that one.

Have noticed PSP when I have been looking around. It's a great piece of work. Sad I can't get one

Did PSP go out of business?

It's out of stock on the website.
I have sent PSP a email. Let's wait and see

Rule1977 · 03-15-2020, 08:30 AM

Quote:

Originally Posted by Viking.dk

Quote:

Originally Posted by Rule1977

Quote:

Originally Posted by Viking.dk

Quote:

Originally Posted by Jeef

if you can get PSP get that one.

Have noticed PSP when I have been looking around. It's a great piece of work. Sad I can't get one

Did PSP go out of business?

It's out of stock on the website.
I have sent PSP a email. Let's wait and see

Yeah.. everything is out of stock that's why I was wondering if they are no longer in business.

Jeef · 03-15-2020, 08:58 AM

the community needs to support more companies like PSP.

Let's keep quality parts in our platform!

Viking.dk · 03-26-2020, 06:32 PM

Quote:

Originally Posted by Rule1977

Quote:

Originally Posted by Viking.dk

Quote:

Originally Posted by Rule1977

Quote:

Originally Posted by Viking.dk

Quote:

Originally Posted by Jeef

if you can get PSP get that one.

Have noticed PSP when I have been looking around. It's a great piece of work. Sad I can't get one

Did PSP go out of business?

It's out of stock on the website.
I have sent PSP a email. Let's wait and see

Yeah.. everything is out of stock that's why I was wondering if they are no longer in business.

Reply from PSP: Don't have any of those

I have asked if he plan to produce it in the future, but no reply

ragingpanda · 03-26-2020, 06:51 PM

If anybody is interested in a used psp outlet for stock turbos/rb next gen, please pm me. I will have pictures of it soon. Reason for selling: I upgraded to rb game finishers turbos and the psp outlet will not work with the td04 compressor housings.

blaster3500 · 03-27-2020, 08:16 AM

From what I have read PSP moved on to another platform. I cant blame him, the VRSF is an exact copy of his outlet. I guess it is part of business but frustrating to see.

mike@x-ph.com · 03-27-2020, 10:21 AM

Quote:

Originally Posted by Rule1977

https://x-ph.com/vrsf-n54-aluminum-t...9-e90-e92-e60/

VRSF is the way to go and it's on sale right now at Extreme Powerhouse.

Viking.dk · 03-31-2020, 02:02 PM

VRSF is probably a fine product. But it's nowhere near the quality of PSP of what I can see. Might end up with the VRSF anyway, as I can't find any other supplier of alu inlet.

vrracing · 04-02-2020, 12:56 PM

I just installed the aluminum VRSF outlets. They fit fine. Access is a nightmare but that is vendor-neutral even with the subframe removed. I would recommend removing the metal water pipe to make life much easier so you'll probably want the special rounded rectangular o-ring.

Viking.dk · 04-02-2020, 01:55 PM

Quote:

Originally Posted by vrracing

I just installed the aluminum VRSF outlets. They fit fine. Access is a nightmare but that is vendor-neutral even with the subframe removed. I would recommend removing the metal water pipe to make life much easier so you'll probably want the special rounded rectangular o-ring.

Thank you for info. Did you reuse V Band?

mweisdorfer · 04-03-2020, 11:05 AM

Quote:

Originally Posted by Viking.dk

Quote:

Originally Posted by vrracing

I just installed the aluminum VRSF outlets. They fit fine. Access is a nightmare but that is vendor-neutral even with the subframe removed. I would recommend removing the metal water pipe to make life much easier so you'll probably want the special rounded rectangular o-ring.

Thank you for info. Did you reuse V Band?

If we are talking about this

https://www.vr-speed.com/vrsf-n54-tu...4-e90-e92.html

I installed mine in about 90 minutes from the top.

It's a little tricky getting both pipes to match up before installing the silicone connector, but that's how I did it. I tried putting the silicone connector on one end and then matching the other end. No dice.

I would also wrap the silicone connector in DEI gold tape. It's really close to the exhaust manifold. The adapter never gets hotter than 250, with the DEI gold tape on it when I check it with a laser temp gauge. So, the tape is worth it's weight in gold.

Keep in mind Silicone is only rated for 500 degrees at best. The exhaust manifold can reach that temp after a long drive, on a hot summer day, no problem.

vrracing · 04-03-2020, 05:23 PM

Yes I did reuse the little v-bands. VRSF didnt provide new ones. They seemed fine but as you may know the 'hinge' is just flexible metal so if they arent virgin it might be worth ordering new ones. My Mitsubishi rattlers look untouched and I didnt have any issues.

Another recommendation I would make is to start with the back turbo and work your way forward. I had installed the 7.5" VRSF intercooler a few weeks ago and had to remove it to get the outlets lined up. The silicone coupler VRSF provides to connect the outlets to the intercooler (part of the intercooler kit) is very long and goes way up both the turbo outlet and the intercooler inlet.

03-13-2020, 08:46 PM	#1
Viking.dk Enlisted Member 0 Rep 36 Posts Drives: E91 LCI Join Date: Jan 2020 Location: Copenhagen iTrader: (0) Garage List 2001 Aprilia RS250 [0.00] 2009 335 E91 LCI [0.00]	Outlet Charge Pipe Looking for best N54 Aluminum Turbo Outlet Charge Pipe for my E91. By best I mean, best performance🏎 and best fit
	Appreciate 0 Tweet Quote

03-14-2020, 09:15 AM	#3
Jeef Lieutenant Colonel 388 Rep 1,945 Posts Drives: AW E92 335i Join Date: Nov 2008 Location: San Diego, CA iTrader: (6)	if you can get PSP get that one.
	Appreciate 3 type-dRew641.00 Viking.dk0.00 Torgus3781.50 Quote

03-14-2020, 07:49 PM	#9
nicky dj Chelsea Football Club 345 Rep 780 Posts Drives: E92 N54 Join Date: Aug 2012 Location: Irvine iTrader: (0)	Love my Evolution Racewerks CP
	Appreciate 0 Quote

03-15-2020, 08:58 AM	#13
Jeef Lieutenant Colonel 388 Rep 1,945 Posts Drives: AW E92 335i Join Date: Nov 2008 Location: San Diego, CA iTrader: (6)	the community needs to support more companies like PSP. Let's keep quality parts in our platform!
	Appreciate 1 type-dRew641.00 Quote

03-26-2020, 06:51 PM	#15
ragingpanda Banned 321 Rep 751 Posts Drives: 135i Join Date: May 2012 Location: Florida iTrader: (0)	If anybody is interested in a used psp outlet for stock turbos/rb next gen, please pm me. I will have pictures of it soon. Reason for selling: I upgraded to rb game finishers turbos and the psp outlet will not work with the td04 compressor housings.
	Appreciate 2 type-dRew641.00 Torgus3781.50 Quote

03-27-2020, 08:16 AM	#16
blaster3500 Lieutenant 143 Rep 567 Posts Drives: 07 E90 335i Join Date: Aug 2010 Location: Seneca, SC iTrader: (7)	From what I have read PSP moved on to another platform. I cant blame him, the VRSF is an exact copy of his outlet. I guess it is part of business but frustrating to see. __________________ 07 335 6MT
	Appreciate 1 type-dRew641.00 Quote

03-31-2020, 02:02 PM	#18
Viking.dk Enlisted Member 0 Rep 36 Posts Drives: E91 LCI Join Date: Jan 2020 Location: Copenhagen iTrader: (0) Garage List 2001 Aprilia RS250 [0.00] 2009 335 E91 LCI [0.00]	VRSF is probably a fine product. But it's nowhere near the quality of PSP of what I can see. Might end up with the VRSF anyway, as I can't find any other supplier of alu inlet.
	Appreciate 0 Quote

04-02-2020, 12:56 PM	#19
vrracing Enlisted Member 9 Rep 45 Posts Drives: 2008 BMW 335i coupe. DCI Join Date: Jan 2017 Location: Texas iTrader: (0)	I just installed the aluminum VRSF outlets. They fit fine. Access is a nightmare but that is vendor-neutral even with the subframe removed. I would recommend removing the metal water pipe to make life much easier so you'll probably want the special rounded rectangular o-ring. __________________ 2008 BMW E92, 100k, DCI, JB4-G4. 7.5 VRSF Intercooler, VRSF outlets, VRSF inlets, VRSF charge pipes with OEM DVs, VRSF street exhaust, catless DPs, Dynamic Autowerks Stage 2+ 775RS with Garrett Ultra Flow Gtx 2 11 Blade Wheel
	Appreciate 0 Quote

04-03-2020, 05:23 PM	#22
vrracing Enlisted Member 9 Rep 45 Posts Drives: 2008 BMW 335i coupe. DCI Join Date: Jan 2017 Location: Texas iTrader: (0)	Yes I did reuse the little v-bands. VRSF didnt provide new ones. They seemed fine but as you may know the 'hinge' is just flexible metal so if they arent virgin it might be worth ordering new ones. My Mitsubishi rattlers look untouched and I didnt have any issues. Another recommendation I would make is to start with the back turbo and work your way forward. I had installed the 7.5" VRSF intercooler a few weeks ago and had to remove it to get the outlets lined up. The silicone coupler VRSF provides to connect the outlets to the intercooler (part of the intercooler kit) is very long and goes way up both the turbo outlet and the intercooler inlet. __________________ 2008 BMW E92, 100k, DCI, JB4-G4. 7.5 VRSF Intercooler, VRSF outlets, VRSF inlets, VRSF charge pipes with OEM DVs, VRSF street exhaust, catless DPs, Dynamic Autowerks Stage 2+ 775RS with Garrett Ultra Flow Gtx 2 11 Blade Wheel
	Appreciate 1 Rule1977194.50 Quote