3 stage intake manifold for BMW N52 325i/328i

E92William · 08-27-2020, 11:37 PM

BIMMERPOST / Classifieds

Asking Price:

USD 315.00

Item Interest

This 3 stage manifold is ready to install. Fully refreshed, cleaned and tested. Waiting to find an N52 as it's new home

I take apart the disa valve flaps and clean them, rebuild the internals, grease them and put them with the flap and shaft bonded together as one piece to rule out them breaking at all in the future and test how they work thoroughly to make sure they're in good working shape, most valves straight out of a used car will be faulty or slow so this is a huge plus to this manifold. Also these disas are both updated revision valves with no risk at all of anything dropping into the intake.

Videos of valves working:
Large disa

Small disa

I don't include shipping but depending where you live we can work something out

Easiest way to do it is through eBay:

http://rover.ebay.com/rover/1/711-53...g&toolid=11111

MAski · 09-02-2020, 08:24 AM

I'm interested for my recently acquired 328i.

E92William · 09-15-2020, 07:52 PM

Post updated with a recently finished and tested manifold

dumapuma · 10-29-2020, 09:24 PM

How did you close up the valves after opening up?

Also is the white stuff on the valves grease? Is it okay that they are packed with grease like that?

E92William · 10-30-2020, 09:57 AM

Quote:

Originally Posted by dumapuma

How did you close up the valves after opening up?

Also is the white stuff on the valves grease? Is it okay that they are packed with grease like that?

The grease is safe for plastics and in my opinion is a must have. There's no reason why the plastics in these valves should be wearing over time to the point of breaking and one important part is lack or lubrication.

They're sealed with formic acid and then touched up by melting the plastic seam to ensure it doesn't leak or get anything inside

Twix · 11-01-2020, 06:41 PM

Hey E92William would you ship to Canada?

E92William · 11-01-2020, 11:24 PM

Quote:

Originally Posted by Twix

Hey E92William would you ship to Canada?

Sure. Gets a bit more expensive since it has to pass customs but doable

kthng · 11-08-2020, 06:45 AM

$325 shipped to 48120? Paypal ready.

850CSi · 11-13-2020, 11:32 PM

Quote:

Originally Posted by E92William

Sure. Gets a bit more expensive since it has to pass customs but doable

Hey -- your PMs are full

Nihilation · 11-27-2020, 07:20 PM

Ready to buy at your full price. Please PM me before I spend it on something else.

-Josh

e92streakofalpinewhite · 12-17-2020, 03:13 PM

Just purchased your last one on ebay

E92William · 12-18-2020, 07:40 PM

Quote:

Originally Posted by e92streakofalpinewhite

Just purchased your last one on ebay

I saw that thank you. I sent it out today. Here are your disa valves being tested:

lilred911 · 01-22-2021, 05:46 PM

Hey William, tried sending you a PM but inbox is full.

Do you still have any of these intake for sale?

E92William · 01-22-2021, 06:01 PM

Quote:

Originally Posted by lilred911

Hey William, tried sending you a PM but inbox is full.

Do you still have any of these intake for sale?

I do. Just cleared the inbox. Sent you a message

dannyboydluxe88 · 02-22-2021, 03:59 PM

Quote:

Originally Posted by E92William

Quote:

Originally Posted by lilred911

Hey William, tried sending you a PM but inbox is full.

Do you still have any of these intake for sale?

I do. Just cleared the inbox. Sent you a message

Hello, tried sending you a PM, but your box is full, do you have any of these intake manifold available?

E92William · 02-22-2021, 04:09 PM

Quote:

Originally Posted by dannyboydluxe88

Quote:

Originally Posted by E92William

Quote:

Originally Posted by lilred911

Hey William, tried sending you a PM but inbox is full.

Do you still have any of these intake for sale?

I do. Just cleared the inbox. Sent you a message

Hello, tried sending you a PM, but your box is full, do you have any of these intake manifold available?

Hey just cleared it up, I'll have more very soon as I'm finishing valves for them

jean_martin.roux · 02-22-2021, 06:49 PM

E92William Keep me in the loop as well when you do get those back in stock. I'll take one from you!

StumptownRider · 03-06-2021, 09:28 AM

Quote:

Originally Posted by E92William

Hey just cleared it up, I'll have more very soon as I'm finishing valves for them

When do you think you'll have more ready to go? Planning to do some work next weekend, wonder if it could be feasible to 83864.

Thanks!

StumptownRider · 03-06-2021, 09:35 AM

What's needed to make this work once installed on a 328? Anyone have some good links/DIYs?

I've watched a handful of youtube videos, and seen a handful of threads, but looking for clarity on what to prepare for (is it just coding, or a flash of some DME map file, what tools can do it?)

Trying to get ISTA+ / ISTA-P on windows 10 but I do have BimmerGeeks ProTools if that might do it.

E92William · 03-06-2021, 10:28 AM

Quote:

Originally Posted by StumptownRider

Quote:

Originally Posted by E92William

Hey just cleared it up, I'll have more very soon as I'm finishing valves for them

When do you think you'll have more ready to go? Planning to do some work next weekend, wonder if it could be feasible to 83864.

Thanks!

I will pm you but I have manifolds on hand just not many valves finished for them that aren't called for for rebuild. There's more on the way sorry for the delay

E92William · 03-06-2021, 10:30 AM

Quote:

Originally Posted by StumptownRider

What's needed to make this work once installed on a 328? Anyone have some good links/DIYs?

I've watched a handful of youtube videos, and seen a handful of threads, but looking for clarity on what to prepare for (is it just coding, or a flash of some DME map file, what tools can do it?)

Trying to get ISTA+ / ISTA-P on windows 10 but I do have BimmerGeeks ProTools if that might do it.

You don't need ISTA to get this to work on the car, all you need is BMW standard tools from the bimmergeeks website. Basically you're unlocking the dme and then flashing a file on to it that lets the car use the 330s higher power class settings. It sounds complicated but it really isn't.

Here's a video I recorded on the DIY of how to tune the car to 330 for free with a bimmerlabs tune:

Mark963 · 03-06-2021, 08:57 PM

I'm interested too - send you PM's

08-27-2020, 11:37 PM	#1
E92William Banned 1998 Rep 2,026 Posts Drives: 2008 E92 328xi Join Date: Nov 2019 Location: Miami iTrader: (0) Garage List 2008 BMW 328xi [0.00]	BIMMERPOST / Classifieds Asking Price: USD 315.00 Item Interest This 3 stage manifold is ready to install. Fully refreshed, cleaned and tested. Waiting to find an N52 as it's new home I take apart the disa valve flaps and clean them, rebuild the internals, grease them and put them with the flap and shaft bonded together as one piece to rule out them breaking at all in the future and test how they work thoroughly to make sure they're in good working shape, most valves straight out of a used car will be faulty or slow so this is a huge plus to this manifold. Also these disas are both updated revision valves with no risk at all of anything dropping into the intake. Videos of valves working: Large disa Small disa I don't include shipping but depending where you live we can work something out Easiest way to do it is through eBay: http://rover.ebay.com/rover/1/711-53...g&toolid=11111 Attached Images Last edited by E92William; 01-31-2021 at 05:02 PM..
	Appreciate 4 putnampunk28.50 MAski25.50 colorado.e9x3065.50 Seattlesquash894.50 Tweet Quote

09-02-2020, 08:24 AM	#2
MAski Enlisted Member 26 Rep 34 Posts Drives: 2014 435i GC Join Date: Feb 2020 Location: MA iTrader: (0)	PM Sent I'm interested for my recently acquired 328i.
	Appreciate 2 E92William1998.00 NOKO245.50 Quote

09-15-2020, 07:52 PM	#3
E92William Banned 1998 Rep 2,026 Posts Drives: 2008 E92 328xi Join Date: Nov 2019 Location: Miami iTrader: (0) Garage List 2008 BMW 328xi [0.00]	Post updated with a recently finished and tested manifold
	Appreciate 0 Quote

10-29-2020, 09:24 PM	#4
dumapuma New Member 0 Rep 7 Posts Drives: 2009 BMW 328i Join Date: Jun 2020 Location: Central NJ iTrader: (0)	How did you close up the valves after opening up? Also is the white stuff on the valves grease? Is it okay that they are packed with grease like that?
	Appreciate 0 Quote

11-01-2020, 06:41 PM	#6
Twix Lieutenant Colonel 653 Rep 1,922 Posts Drives: 2011 e91 Join Date: Jan 2013 Location: Calgary, AB, Canada iTrader: (0) Garage List 2011 BMW 328i xDriv ... [0.00] 2002 Land Rover Dis ... [0.00]	Hey E92William would you ship to Canada? __________________ 2011 E91 2016 M2 - Sold 2014 X1 - Sold 2002 Land Rover Discovery II - 3" lift & 33s
	Appreciate 1 oneball25.50 Quote

11-08-2020, 06:45 AM	#8
kthng Enlisted Member 9 Rep 35 Posts Drives: E92 m3, 135is, 328i touring Join Date: Oct 2020 Location: Metro Detroit iTrader: (0)	$325 shipped to 48120? Paypal ready.
	Appreciate 0 Quote

11-27-2020, 07:20 PM	#10
Nihilation Lieutenant 184 Rep 518 Posts Drives: BMW M3, 328xi AT and 328i 6MT Join Date: Nov 2009 Location: Haymarket, VA iTrader: (1)	Ready to buy at your full price. Please PM me before I spend it on something else. -Josh __________________ 2003 M3 \| SMG \| KW V1 \| Apex ARC-8s \| 3.85 LSD \| Cobra Nogaro \| S2R Tuning Sunroof Delete \| Billy Boat Section 3
	Appreciate 1 E92William1998.00 Quote

12-17-2020, 03:13 PM	#11
e92streakofalpinewhite New Member 12 Rep 13 Posts Drives: 2009 328i Coupe Join Date: Dec 2020 Location: Charlotte, NC iTrader: (0)	Just purchased your last one on ebay
	Appreciate 1 E92William1998.00 Quote

01-22-2021, 05:46 PM	#13
lilred911 New Member 0 Rep 12 Posts Drives: Prius Join Date: Aug 2016 Location: Vancouver, British Columbia iTrader: (0)	Hey William, tried sending you a PM but inbox is full. Do you still have any of these intake for sale?
	Appreciate 0 Quote

02-22-2021, 06:49 PM	#17
jean_martin.roux Enlisted Member 16 Rep 42 Posts Drives: E86 M - F31 328D - i01 REX Join Date: Mar 2020 Location: Montreal iTrader: (0)	E92William Keep me in the loop as well when you do get those back in stock. I'll take one from you!
	Appreciate 0 Quote

03-06-2021, 09:35 AM	#19
StumptownRider New Member 15 Rep 27 Posts Drives: E91 328i, B6A4, 986-S Join Date: Jan 2021 Location: Bellevue, WA iTrader: (0)	What's needed to make this work once installed on a 328? Anyone have some good links/DIYs? I've watched a handful of youtube videos, and seen a handful of threads, but looking for clarity on what to prepare for (is it just coding, or a flash of some DME map file, what tools can do it?) Trying to get ISTA+ / ISTA-P on windows 10 but I do have BimmerGeeks ProTools if that might do it.
	Appreciate 0 Quote

03-06-2021, 08:57 PM	#22
Mark963 Private 29 Rep 74 Posts Drives: 2011 328i Join Date: Jun 2018 Location: Iowa iTrader: (0) Garage List 2011 BMW 328 [0.00]	I'm interested too - send you PM's
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search