Software - Help yourself

thesugarat · 01-19-2021, 01:03 PM

J0K3R5, big thanks for consolidating all this. I'm thinking of installing the Standalone ISTA-P 3.67.1.006 version you have available, but there aren't any install instructions available. Did I miss something?

Edit: Nevermind... I figured it out.

Wozza77 · 01-21-2021, 08:46 AM

Quote:

Originally Posted by MrSweet1991

That's why I said to go to page 10 where the install instructions are for the

"NodeEdiabasVoltageControl"

The Mega link contains that software and once you install that you will be able to run the software and manually change the voltages of ignition so ISTA thinks you've turned the ignition on and off.

Following the instructions but the file "AllowFakeISTAOperation.reg" Seems to be missing.

J0K3R5 · 01-22-2021, 09:50 AM

Quote:

Originally Posted by Wozza77

Following the instructions but the file "AllowFakeISTAOperation.reg" Seems to be missing.

gjm120 · 01-22-2021, 11:13 AM

I have ISTA-D version 4.01.21 (Bimmergeeks version).

Am I missing anything by not having one of the later versions? Car is a 2013 E82.

TIA

Shay1128 · 01-26-2021, 09:46 PM

Quote:

Originally Posted by J0K3R5

Hi,

I need you help with maps: Road Map North America EVO

Could you help with download links to the same?

AUDELA · 01-30-2021, 02:22 PM

Quote:

Originally Posted by J0K3R5

Quote:

Originally Posted by Rollerpig

Can anybody help please I'm trying to install ISTA + but haven't got a clue which files to download or anything, have a 2012 build E91 N47 engine looking to read faults and possibly code too

Thanks

https://mega.nz/folder/wlpHiI4a#f54pFHrRuYfA164xrSTlPA

J0k3R5 — thanks so much for this. Amazing. Just to verify the latest version of ISTA you have up is 4.27.12 right? EDIT: Never mind — I went back to OP and found link with v4.27.22 Sedoy Standalone version. Assume this is latest.

I've got an E93 325i with N53 engine and just installed the Bimmergeeks Standard Tools - need ISTA+ to do a Nox Cat replace function and delete adaptations as my Indy failed to do so after replacing nox sensor.

allex29 · 02-03-2021, 02:45 PM

Hey, wanting to let you guys know you can use Carly with standard k+dcan cable. All the best to Joker and everyone else!

Colink2 · 02-04-2021, 08:47 AM

Quote:

Originally Posted by J0K3R5

Added a working INPA that works on e90 N47 engines with no errors.

https://1drv.ms/u/s!ApTXN2OB77W_iZcf..._t3vg?e=E3RYRc

Hi
I have been having issues with INPA E90 and N47
Initially no files installed
Then errors when I found them here
https://www.babybmw.net/forum/viewto...68ef2&start=15

Your link is invalid.
Please add a new link.
If these fiels are on in the Mega.nz list please identify which files work with E90 and N47

Thanks ColinK2

J0K3R5 · 02-04-2021, 11:28 AM

v.4.27.31_PSdZData_Lite

ISTA_v4.27.31 - Sedoy Standalone

added

J0K3R5 · 02-04-2021, 11:29 AM

Quote:

Originally Posted by Colink2

Hi

If these fiels are on in the Mega.nz list please identify which files work with E90 and N47

Thanks ColinK2

https://mega.nz/folder/wlpHiI4a#f54pFHrRuYfA164xrSTlPA

KawBoy · 02-04-2021, 05:54 PM

I've ISTA-P 3.67.1.006, courtesy of J0K3R5 [thank you much].
When starting it up with Loader 6.1, I've got these errors:

94201 technical service initialization failed
-2 Global; Unknown
55054 Global; Unknown
10007 (CIP) Fault during initialization of EDIABAS

I am using K-DCAN Bimmergeeks cable [brand new].

As for the ISTA-P install, I've 7unzip it to C:\ and running the loader supplied.

Not sure whether or not this has been covered, but any help would be much appreciated.

Thank you.

Mike335D85 · 02-05-2021, 04:59 PM

Hey JOK3R5
thank you for this fantastic stash of software
ive downloaded ista 4.27.31 and installed it it opens up but is asking me for a licence and registration key have i done something wrong? or missed something?
please help
cheers
mike

J0K3R5 · 02-05-2021, 11:00 PM

Quote:

Originally Posted by KawBoy

I've ISTA-P 3.67.1.006, courtesy of J0K3R5 [thank you much].
When starting it up with Loader 6.1, I've got these errors:

use Loader 6.4

J0K3R5 · 02-05-2021, 11:01 PM

Quote:

Originally Posted by Mike335D85

Hey JOK3R5
thank you for this fantastic stash of software
ive downloaded ista 4.27.31 and installed it it opens up but is asking me for a licence and registration key have i done something wrong? or missed something?
please help
cheers
mike

How did you install the program ?
did you use the self installer .exe ?

KawBoy · 02-06-2021, 11:28 AM

Quote:

Originally Posted by J0K3R5

use Loader 6.4

Using Loader 6.4 gives me no options under the Connection Manager. Maybe ISTA is thinking I am using NEXT?

Is there an EXE file that I need to run or should I just unzip ISTA-P 3.67.1.006.7z to C:\?

Again, thank you much for your help.

J0K3R5 · 02-06-2021, 12:16 PM

v.4.27.31_PSdZData_Full

added.

grab will you can, as it takes up too much storage space.
will share as long as I can

J0K3R5 · 02-06-2021, 12:17 PM

Quote:

Originally Posted by KawBoy

Using Loader 6.4 gives me no options under the Connection Manager. Maybe ISTA is thinking I am using NEXT?

Is there an EXE file that I need to run or should I just unzip ISTA-P 3.67.1.006.7z to C:\?

Again, thank you much for your help.

unzip ISTA-P 3.67.1.006.7z to C:\

Mike335D85 · 02-06-2021, 01:21 PM

Quote:

Originally Posted by J0K3R5

Quote:

Originally Posted by Mike335D85

Hey JOK3R5
thank you for this fantastic stash of software
ive downloaded ista 4.27.31 and installed it it opens up but is asking me for a licence and registration key have i done something wrong? or missed something?
please help
cheers
mike

How did you install the program ?
did you use the self installer .exe ?

Yes I used the self installer

KawBoy · 02-06-2021, 06:52 PM

Quote:

Originally Posted by J0K3R5

unzip ISTA-P 3.67.1.006.7z to C:\

It just doesn't work for me; I've just reformatted a partition and installed a fresh W10 20H2 and I still have the same error messages. But it is OK. I do have everything else working fine, including ISTA+.

There is one thing though that I'd like to do: I am sure J0K3R5 is not on this for the money, or for any reason other than sharing his stuff with us. I do know that MEGA can get costly though.
If al all possible, I'd like to show an appreciation, a little token of appreciation and donate a few US$ to J0K3R5 to help him offset the cost of having all this stuff for us. If you J0K3R5 is OK with that, please send me your PayPal thing or Zelle and I'll be more than happy to send you something. Please apologize me if this has been covered before.
Thank you.

AK_5eries · 02-07-2021, 03:21 PM

Thank you very much j0k3r5 for doing this. I'm interested in your ISTA 4.27.31 Sedoy Standalone. Is there a one click installer for your software. I have had trouble installing ISTA from other links.

I have been involved with other forums for over a decade, but had to make an account here and post because of jok3r5 excellent resource.

allex29 · 02-07-2021, 06:47 PM

Quote:

Originally Posted by E90E60

Thank you very much j0k3r5 for doing this. I'm interested in your ISTA 4.27.31 Sedoy Standalone. Is there a one click installer for your software. I have had trouble installing ISTA from other links.

I have been involved with other forums for over a decade, but had to make an account here and post because of jok3r5 excellent resource.

It is indeed a one-click-installer

George995 · 02-08-2021, 08:20 AM

J0K3R5 do you have a torrent link for all that files because mega only allows me 5gb for download and it will take ages to finish,...give me a torrent plz

01-19-2021, 01:03 PM	#265
thesugarat Registered 0 Rep 1 Posts Drives: BMW 2006 325xi Join Date: Jan 2021 Location: Omaha iTrader: (0)	J0K3R5, big thanks for consolidating all this. I'm thinking of installing the Standalone ISTA-P 3.67.1.006 version you have available, but there aren't any install instructions available. Did I miss something? Edit: Nevermind... I figured it out. Last edited by thesugarat; 01-20-2021 at 10:08 PM..
	Appreciate 0 Quote

01-22-2021, 11:13 AM	#268
gjm120 Colonel 2183 Rep 2,806 Posts Drives: 2013 128i, 2021 230i Join Date: Jan 2016 Location: East Texas iTrader: (1)	ISTA Version Question I have ISTA-D version 4.01.21 (Bimmergeeks version). Am I missing anything by not having one of the later versions? Car is a 2013 E82. TIA __________________ E82 / BMWP Springs / Koni Yellows / M front control arms / Adjustable front endlinks / M rear guide rods / Whiteline Poly RSFB
	Appreciate 0 Quote

02-03-2021, 02:45 PM	#271
allex29 Private 13 Rep 51 Posts Drives: BMW E91 M47 Join Date: Apr 2020 Location: Romania iTrader: (0)	Hey, wanting to let you guys know you can use Carly with standard k+dcan cable. All the best to Joker and everyone else!
	Appreciate 0 Quote

02-04-2021, 11:28 AM	#273
J0K3R5 Lieutenant 406 Rep 410 Posts Drives: BMW Join Date: Oct 2016 Location: In a deep hole iTrader: (0)	v.4.27.31_PSdZData_Lite ISTA_v4.27.31 - Sedoy Standalone added __________________ Help yourself Software part II, read post 1 : https://www.e90post.com/forums/showt...7#post27890067 Last edited by J0K3R5; 02-04-2021 at 11:33 AM..
	Appreciate 0 Quote

02-04-2021, 05:54 PM	#275
KawBoy Lieutenant 155 Rep 561 Posts Drives: 2012 E92 M3 Join Date: May 2012 Location: SE FL iTrader: (2)	ISTA-P startup errors I've ISTA-P 3.67.1.006, courtesy of J0K3R5 [thank you much]. When starting it up with Loader 6.1, I've got these errors: 94201 technical service initialization failed -2 Global; Unknown 55054 Global; Unknown 10007 (CIP) Fault during initialization of EDIABAS I am using K-DCAN Bimmergeeks cable [brand new]. As for the ISTA-P install, I've 7unzip it to C:\ and running the loader supplied. Not sure whether or not this has been covered, but any help would be much appreciated. Thank you.
	Appreciate 0 Quote

02-05-2021, 04:59 PM	#276
Mike335D85 New Member 0 Rep 9 Posts Drives: BMW 335D Join Date: Jan 2021 Location: Borehamwood iTrader: (0)	Hey JOK3R5 thank you for this fantastic stash of software ive downloaded ista 4.27.31 and installed it it opens up but is asking me for a licence and registration key have i done something wrong? or missed something? please help cheers mike
	Appreciate 0 Quote

02-06-2021, 12:16 PM	#280
J0K3R5 Lieutenant 406 Rep 410 Posts Drives: BMW Join Date: Oct 2016 Location: In a deep hole iTrader: (0)	v.4.27.31_PSdZData_Full added. grab will you can, as it takes up too much storage space. will share as long as I can __________________ Help yourself Software part II, read post 1 : https://www.e90post.com/forums/showt...7#post27890067
	Appreciate 0 Quote

02-07-2021, 03:21 PM	#284
AK_5eries New Member 0 Rep 5 Posts Drives: F10 N52 Join Date: Feb 2021 Location: SoCal iTrader: (0)	Thank you very much j0k3r5 for doing this. I'm interested in your ISTA 4.27.31 Sedoy Standalone. Is there a one click installer for your software. I have had trouble installing ISTA from other links. I have been involved with other forums for over a decade, but had to make an account here and post because of jok3r5 excellent resource.
	Appreciate 0 Quote

02-08-2021, 08:20 AM	#286
George995 Registered 0 Rep 1 Posts Drives: Bmw e39 Join Date: Feb 2021 Location: Uk iTrader: (0)	Download issue J0K3R5 do you have a torrent link for all that files because mega only allows me 5gb for download and it will take ages to finish,...give me a torrent plz
	Appreciate 0 Quote