|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
N54 wot box 2step
|
|
04-15-2024, 02:39 PM | #1 |
Registered
0
Rep 4
Posts |
So I bought a Wot Box about two years ago and realized that I wasn’t able to install it since I had a AT(makes sense). So anyways I did try to set up the Wot Box through a shop to work with a button awhile ago and it never worked. Coming back to more recently I have had my car MT swapped. And I’ve went through old forum posts on what wires to connect to and I’ve found that all of my wires are correctly tapped into eachother. Except for my green clutch wire.
I tried to follow the old forum post I seen a while ago and looked around my DME for the blue/brown pin 18 wire he said to connect to and it’s no where to be seen. Could it be possible that my car just doesn’t have that pin since it was previously AT. Someone please help me figure this out. Could it also be possible to wire the green wire of the wot box to the clutch switch module. |
Bookmarks |
|
|