[BSM n54iS]

I just came across this DSSR for n54 cars from Turner after waiting way to dam long for AKG (I don't think they will ever be back in stock for the n54 variant dssr ) looks to be a new option has anyone purchased this yet?

Says it replaces the PN for the same selector rod on my 335is which is the curved very tight option so hoping it works, I'll probably purchase in the next months and pair with the Dinan ssk I have had sitting around waiting to be installed

https://www.turnermotorsport.com/p-2...xoCMg0QAvD_BwE

[Shoooter_j]

Saw it as well am planning on adding this too sometime this summer as part of a full shifter refresh, so we may be on the same install schedule. I’m assuming it’ll be the same results as others who have installed a similar part in the past (e.g. Vehicular DIY here

)

[Cole335]

Originally Posted by BSM n54iS

I just came across this DSSR for n54 cars from Turner after waiting way to dam long for AKG (I don't think they will ever be back in stock for the n54 variant dssr ) looks to be a new option has anyone purchased this yet?

Says it replaces the PN for the same selector rod on my 335is which is the curved very tight option so hoping it works, I'll probably purchase in the next months and pair with the Dinan ssk I have had sitting around waiting to be installed

https://www.turnermotorsport.com/p-2...xoCMg0QAvD_BwE

I purchased and installed it when i did my clutch change. just finished up and the car won't go into first gear or reverse because it rubs. i'm going to flip it around tomorow and see if i installed it backwards somehow and will update

[Cole335]

Originally Posted by BSM n54iS

I just came across this DSSR for n54 cars from Turner after waiting way to dam long for AKG (I don't think they will ever be back in stock for the n54 variant dssr ) looks to be a new option has anyone purchased this yet?

Says it replaces the PN for the same selector rod on my 335is which is the curved very tight option so hoping it works, I'll probably purchase in the next months and pair with the Dinan ssk I have had sitting around waiting to be installed

https://www.turnermotorsport.com/p-2...xoCMg0QAvD_BwE

I can confirm this does not fit with a 2008 e92 335i. Won't go into first or reverse and it rubs on 5th and 6th

[335i54n]

yeah the oe has a pretty aggressive bend, was always sus how this might work. even their ssk kit gives a different shift plate/ball holder mount that raise the pivot up for clearance. tried to be lazy and just replace the shifter when i got their ssk kit and the oe rod hit the flex disc, so had to install the whole unit

[Cole335]

Originally Posted by Cole335

I can confirm this does not fit with a 2008 e92 335i. Won't go into first or reverse and it rubs on 5th and 6th

So instead of returning it, I actually ended up taking the shifter arm out and grinded down the area where it was rubbing. probibly took out a quarter inch deep like 2.5 inches long. quite a bit of material but not too much in comparison to the size of the arm. It works fantastic now,

[Shoooter_j]

Great to hear you got it to work, just got it delivered last week but don’t anticipate installation until later in the summer.