[jphughan]

Originally Posted by slamaster1261

i have a macbook pro without windows software. can i still code my e90 through my macbook? i know it says you can use any laptop but im just making sure before i buy a cable and also does anyone have a cable i could borrow?

The software only supports Windows 32-bit, so you'd need a VM to do it with a MacBook.

[marcenick]

¿anyone has code the auto steering wheel lock in CAS Module?

ELV_TESTER
nicht_aktiv

ELV_AUT_FCT
nicht_aktiv
ELV_RESET_FCT
nicht_aktiv

[Knob]

Originally Posted by matrix76

Thank you, I'll update the results I get later when I get back to coding.

Any success yet?

[AW128i]

Originally Posted by slamaster1261

i have a macbook pro without windows software. can i still code my e90 through my macbook? i know it says you can use any laptop but im just making sure before i buy a cable and also does anyone have a cable i could borrow?

I am able to do coding on my MBP using Windows 7 under Parallels. The coding programs are Windows-only.

[Jose_JN]

Originally Posted by matrix76

should be KOMFORTSCHLIESSUNG_FB only

Yes, I tried first this option, but nothing happends and then I tried with the other one. (KOMFORTSCHLIESSUNG_CA)

I do not have ComfortAccess because of this, I didnt expect that KOMFORTSCHLIESSUNG_CA would work.

Of course, I used aktiv (sorry for have written aktive in the other post).

In Spain (and in whole Europe I think) roof doesn't roll up with FOB if you dont have ConfortAccess and you cannot open the roof for easy load the trunk.

The other way is use a SmartTop module but I prefer not to pay that, and for me rolling up windows is enough (roof also)

Thanks again.

[matrix76]

Originally Posted by Knob

Any success yet?

Not attempted yet been busy. I will post results soon.

[matrix76]

Originally Posted by Jose_JN

Yes, I tried first this option, but nothing happends and then I tried with the other one. (KOMFORTSCHLIESSUNG_CA)

I do not have ComfortAccess because of this, I didnt expect that KOMFORTSCHLIESSUNG_CA would work.

Of course, I used aktiv (sorry for have written aktive in the other post).

In Spain (and in whole Europe I think) roof doesn't roll up with FOB if you dont have ConfortAccess and you cannot open the roof for easy load the trunk.

The other way is use a SmartTop module but I prefer not to pay that, and for me rolling up windows is enough (roof also)

Thanks again.

There is not another option I can recommend.

[Knob]

Originally Posted by matrix76

Not attempted yet been busy. I will post results soon.

I´ve tried to increase the low beam brightness, but I couldn´t see a difference yet, it was way too bright outside I think... I´ll try it again at night in a few days.

[M3Newbie88]

Originally Posted by matrix76

Thank you, I'll update the results I get later when I get back to coding.

Did you try this? Any results?

[matrix76]

Originally Posted by 1LazyBmw

Did you try this? Any results?

Later this week, be back then and I am waiting for a sirius module to arrive so I can code it at the same time.

[Pseudo Nim]

guys - has anyone tried to enable paddles? I am still trying to do this. I really don't want to hardened them, considering I seem to have ALL the right components. Anyone been able to do it?

[DESI4life10]

^^Create a new thread about this...so it does not get lost here.

[Pseudo Nim]

yeah good call, since we have a forum for this and all now

[Norb]

Anyone know the code to deactivate the TPMS gauge light?

[gilatpr]

Hello all,

Has anyone got the "All high beams" PWM_WERT2_FL_BIXENON to work on a 330i 2006 yet. I don't have navi or idrive and I have been trying using the bits of knowledge from here and the recomended sites but most speak of e92 or e90 with what I don't have. I have researched and yet not found an answer. I also can not get the "Unlock doors" ER_KEYOUT_AUTOVR to work. Most other mods I have had success thanks to you guys and the tutorial. Keep putting knowledge to work for you!

[djpeetur]

Originally Posted by Norb

Anyone know the code to deactivate the TPMS gauge light?

[franzzz]

It's possible to use Cornering light as welcome light (with angel eye) ?

[marcenick]

Originally Posted by Jose_JN

Hi,
First of all, I am from Spain. Sorry for my english.

I am trying to code my roof on my e93 in order to roll it up from the FOB.
I found 2 parameters on CAS module (KOMFORTSCHLIESSUNG_FB and KOMFORTSCHLIESSUNG_CA) and changed it for 'aktive' but nothing happens.

I dont have comfort access and I only can roll down the top and windows but not roll them up with the FOB (if I use the driver's lock, yes)

Do you know if exist a way to code that?

If only windows roll up with FOB, is enough for me.

I have already get my KOMBI, CAS and NFRM coded for other options like
- Digital speed
- Instant l/100
- Set the sensibility of lights sensor
- Fog lights turn on when unlocking the car
- Comfort FOB eject
...

Regards from Spain

What parameter do you change to activate "Instant l/100"?

[matrix76]

Originally Posted by marcenick

What parameter do you change to activate "Instant l/100"?

Better yet, what is "Instant l/100"

[marcenick]

Originally Posted by matrix76

Better yet, what is "Instant l/100"

I think it is "instant fuel consumption" (at display)

[matrix76]

Originally Posted by marcenick

I think it is "instant fuel consumption" (at display)

thank you, ,

[larry_bml]

Originally Posted by marcenick

I think it is "instant fuel consumption" (at display)

What exactly did you change? What parameters in what module did you change?