|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
e85 bluetooth content analyzers and installation kits!
|
|
12-08-2015, 05:01 PM | #25 |
Lieutenant
108
Rep 471
Posts |
Sorry, I didn't have these developed or coded then. I just found them not too long ago.
They will work with your ECA, though. You'd just need to update the firmware via USB. PM me and I'll cut you a deal. The two I have are spoken for, but I just ordered 5 more.
__________________
08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
|
Appreciate
0
|
12-08-2015, 05:03 PM | #26 |
Lieutenant
108
Rep 471
Posts |
Yessir!
__________________
08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
|
Appreciate
0
|
12-14-2015, 10:16 AM | #27 |
Lieutenant
108
Rep 471
Posts |
New power supplies are in. Always trying to improve things, I thought I'd give these a try.
These guys produce a rock steady 5 volts flat, with no ripple regardless of input voltage. Perfect for a car where the voltage fluctuates depending on RPM, alternator output, etc. Should provide much more consistency than the USB power supplies of past. These will insert inline between the sensor harness with a provided y-connector, instead of being powered through the USB port (power through the USB port uses the ECA's on board voltage regulator, which sucked some voltage). Power supply: Producing 5 volts with a 12.75 volt input: Producing 5 volts with a 10.75 volt input:
__________________
08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
|
Appreciate
0
|
12-30-2015, 09:14 AM | #28 |
Lieutenant
108
Rep 471
Posts |
First digital display shipping out. Ended up using RJ45 connectors for the connection.
Future ones will have a female connector on the ECA side instead of male (doesn't make a difference, just eliminates the cost of the coupler).
__________________
08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
|
Appreciate
0
|
01-23-2016, 08:34 PM | #29 |
Registered
0
Rep 1
Posts |
new to the boards,it wont let me IM you, im working on a project using VEMS and the only input that i could use for HZ output of the octane sensor is already taken up, so i need this HZ to 0-5v brilliance ......not sure how to get your details but i want the non bluetooth with digital display.....ill try again to IM you or something.
|
Appreciate
0
|
01-27-2016, 11:02 AM | #30 |
Lieutenant
108
Rep 471
Posts |
A couple people have asked about wiring. All orders from yesterday on will feature interlocking connectors, which should make things much easier and cleaner.
For anyone with current ECA's up to yesterday, here's how you wire them: For USB powered - the USB power supply red / black get wired to the DME power / ground. The USB cable is then plugged into the ECA and the power supply: For new power supply models: For the digital display:
__________________
08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
|
Appreciate
0
|
02-05-2016, 02:37 PM | #32 |
Lieutenant
108
Rep 471
Posts |
Most people tap it at the green DME power connector.
__________________
08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
|
Appreciate
0
|
02-21-2016, 12:23 PM | #34 |
New Member
4
Rep 11
Posts |
I just installed this kit yesterday and wanted to post my review in case anyone was on the fence.
There is a lot of thought that goes into the design of this new upgraded kit. The connections are idiot proof (different sized connectors for each adapter and to connect to the jb4). Everything is waterproof and doesn't look like corners were cut on materials. Everything was truly plug and play - took less than 30mins start to finish. I only got the analyzer and connector to the jb4 - however I love that the setup is pre-wired if I want to add anything later (and also usb upgradeable). Again, time was clearly put into the design. Aside from the fact that you're saving about half of the cost ($80 shipped versus $149+tax/shipping from fuel-it), I love the fact that I'm supporting a forum member doing his thing rather than a formal business. I feel fuel-it is a great business that brings cool n54 mods to market, but I'm more the kind of person that likes to support the ingenuity of new entries to market. Finally, the customer service and support was top notch. I installed it yesterday and forgot to change the scaling on the methanol settings (jb4). I messaged str8shot before going to bed and woke up to a solution on how to set everything up properly. Everything works great!! Feel free to contact me if anyone is on the fence - str8shot is a stand up guy and I'm impressed with this setup. |
Appreciate
1
|
02-21-2016, 08:28 PM | #35 | |
Real Car Enthusiast
289
Rep 2,082
Posts |
Quote:
|
|
Appreciate
0
|
03-03-2016, 03:54 PM | #37 |
Major Private First Class
455
Rep 1,327
Posts
Drives: 2010 E90 335i M Sport
Join Date: Mar 2014
Location: US, NA, Earth, Milky Way Galaxy
|
Waiting for a reply.
__________________
2008 E92 335i 6MT: FBO + MMP Silicone Inlets | Stage 1 LPFP | 335is clutch + MFactory SMFW | Custom BuraQ + MHD tune | 3.5Bar N20 sensor [SOLD]
2010 E90 335i M-Sport AT: 5" Stepped FMIC, Stage 2 LPFP - MHD V7 E60 Tune running 100% E85 - VRSF DPs |
Appreciate
0
|
03-03-2016, 06:46 PM | #38 |
Lieutenant
108
Rep 471
Posts |
__________________
08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
|
Appreciate
1
|
03-04-2016, 09:27 AM | #39 |
Private First Class
19
Rep 183
Posts |
This looks like a great system. I want to add this to be used with the JB4 and mobile app that has the JB4connect bluetooth running. So which system do I need? Also can the sensor be added into the line if I were to get the female connectors while still on the car or does the fuel line have to be removed. If I can do it on the car can you sell the connectors as well as the sensor so I could just get a complete install package from you. If not a link to where the sensor and connectors can be purchased. Thanks
__________________
2007 335i e90 Auto FBO
JB4 G5, xHP Stage 3 TCU, Wagner EVO 1 FMIC, VRSF DP's, Corsa mufflers w/x-pipe, Mr.5 intake, 25 row oil cooler, ST coilovers, Hotchkis swaybars, rear subframe inserts, Dynavin N7, 3M brushed black interior trim , Apex PS-7 wheels, Continental 235/35/19 & 275/30/19 |
Appreciate
0
|
03-04-2016, 10:14 AM | #40 | |
Lieutenant
108
Rep 471
Posts |
Quote:
I don't sell the lines or sensor, but you can install the female fittings while the line is still on the car. You just need to get underneath it. It's probably easier taking the fuel line off, though. The sensor can be purchased at most GM dealers, and the female connectors can be ordered through Amazon. Dorman part # 800-085. You will need the dorman tool to install the female connectors. Part number 800-301.
__________________
08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
|
|
Appreciate
1
|
03-04-2016, 11:26 PM | #41 | |
Private First Class
19
Rep 183
Posts |
Quote:
|
|
Appreciate
0
|
03-20-2016, 09:09 AM | #43 |
Lieutenant
108
Rep 471
Posts |
Just received the order of boards I was waiting for. All back orders will go out this week.
__________________
08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
|
Appreciate
0
|
03-31-2016, 05:24 PM | #44 |
Lieutenant
108
Rep 471
Posts |
Just an update for anyone waiting for an order with a digital display:
The batch of displays I received are **** and not a single one works. I've already re-ordered, but unfortunately that means waiting a little bit yet. I know some of you are getting anxious. I'd happily give you the vendors name I received these from so you can go kick him in the balls, but China is a hike. This should be reading "E. 28": All 8 of them just display random garbage. Very aggravating. If you're waiting for a standard or bluetooth ECA with no display, it will ship shortly.
__________________
08 Montego Blue 135i Coupe // Sport Package // Custom E30 tune // str8shot bluetooth enabled ECA // Walboro 255 inline pump // BMS downpipes // VRSF 7" FMIC // Injen intake // Berk ceramic exhaust // OEM 550i clutch // MFactory single mass flywheel // Vorshlag camber plates // Hotchkis FSB // Turner adjustable drop links // AST 5100 coilovers // Hawk HPS pads // Ti backing plates // Stoptech stainless brake lines // Turner 15mm spacers
|
Appreciate
0
|
Bookmarks |
Tags |
bluetooth, e85, ethanol |
|
|