[Scoff123]

Originally Posted by vmhelper00

Look in the help folder that's on the desktop

You're saying the boot up has cosmetic issues when converted to physical, right?

Yes when in physical form, the boot up is missing the '*********V3 is loading' screen with the animated BMW logo. There is around 30 seconds of nothing on the screen instead, then the 'vista' style 'Microsoft corporation' green loading bars appear, then eventually the blue windows 7 weclome screen appears followed by the desktop. I'm just curious why this has happened and wondered if anyone had any ideas - could it be an issue with the bootloader not using whatever was customised in the bootlader of the vm perhaps? I havent tried the laptop with my cable connected to the car yet so I dont know if there are any other issues following the vm to physical conversion but hoepfully not.
I've looked in the help folder on the desktop - sorry, what are you referring to?

[vmhelper00]

Originally Posted by Scoff123

Yes when in physical form, the boot up is missing the '*********V3 is loading' screen with the animated BMW logo. There is around 30 seconds of nothing on the screen instead, then the 'vista' style 'Microsoft corporation' green loading bars appear, then eventually the blue windows 7 weclome screen appears followed by the desktop. I'm just curious why this has happened and wondered if anyone had any ideas - could it be an issue with the bootloader not using whatever was customised in the bootlader of the vm perhaps? I havent tried the laptop with my cable connected to the car yet so I dont know if there are any other issues following the vm to physical conversion but hoepfully not.
I've looked in the help folder on the desktop - sorry, what are you referring to?

Use this to try to restore to default. If it doesn't work then I wouldn't spend more time trying to repair it as it's just cosmetic. This is also only intended to be a VM so you don't have to mess with many settings.

http://coderforlife.com/projects/win7boot/

[Scoff123]

Originally Posted by vmhelper00

Use this to try to restore to default. If it doesn't work then I wouldn't spend more time trying to repair it as it's just cosmetic. This is also only intended to be a VM so you don't have to mess with many settings.

http://coderforlife.com/projects/win7boot/

Hi, thanks for the reply. I was just curious as i'm keen to learn more about the VM side of things in general, and it's just the troubleshooter in me that wants to get to the bottom of why it's happening - sad I know! I came across the coder for life site with that tool when researching what might cause the windows loading screen to revert to the vista style one, so might give that a try. It's a seperate interest to the car diagnostics side of things, so will try and ignore it for now and just enjoy the new setup and test it out on the car! Thanks again, Scott

[rismo]

Originally Posted by BimmerGeeks

Well your sorta right. Winkfp DOES apply engine maps. Winkfp mainly writes two files during an update, an OPA(program) & ODA(data). The ODA is where the tune is.

Where the issue comes in is, the average user can't flash CUSTOM maps with winkfp(yet). There are 3 users on this very forum that ARE tuning with winkfp.

Any hint for a techie how to flash with winkpf? :-)

[MMM335]

anyone having trouble with cable and changing settings?

[vmhelper00]

Originally Posted by MMM335

anyone having trouble with cable and changing settings?

Port settings or what? You need to be more specific. If it's the port settings, look in device manager for the COM port number of the usb serial. Then use the shortcut within the OBD help folder (on desktop) to edit the text file and change the COM Port to match the number that's in device manager.

The shortcut for the obd port setting is only in v3 lite. You can find out how to find this file to edit for v3 or v3 lite by looking at previous post on this thread.

[MMM335]

port settings and latency is fine, use obd helper, tools and its timesout when changing, ive had the cable working once before just cant remember the fix to have it change from kline to dcan.

[Johan_G]

Hi, first of all thanks for a very nice VM, good work.

I've got Rheingold(ista/d) working with USB k+dcan cable with connection against physical com port from host machine.

But I can't get Ista/p to work. Is there some special settings in obd.ini, edibias.ini or network adapter that I have missed?
Please give some advise.
/Johan (sorry for my bad english, I'm from sweden)

[babyfaby]

Originally Posted by Johan_G

Hi, first of all thanks for a very nice VM, good work.

I've got Rheingold(ista/d) working with USB k+dcan cable with connection against physical com port from host machine.

But I can't get Ista/p to work. Is there some special settings in obd.ini, edibias.ini or network adapter that I have missed?
Please give some advise.
/Johan (sorry for my bad english, I'm from sweden)

Hej,

After clicking on the Ista/p launcher, did you click on the "Start K+DCAN ICOM Emulator" line before clicking the BMW or Mini (or Rolls Royce) logo?

[Johan_G]

Originally Posted by babyfaby

Hej,

After clicking on the Ista/p launcher, did you click on the "Start K+DCAN ICOM Emulator" line before clicking the BMW or Mini (or Rolls Royce) logo?

Yes I did!
DoI have to set a IP adress on my computer to get the emulator to work properly?

[babyfaby]

Originally Posted by Johan_G

Yes I did!
DoI have to set a IP adress on my computer to get the emulator to work properly?

No you don't have to

[Johan_G]

Originally Posted by babyfaby

No you don't have to

Ok thanks, how about the .ini settings?

Edibas.ini:

Interface = std: obd
#interface = remote

TCP
Remotehost =192.168.68.40
Port =6801

Microsoft loopback adapter called USB is activated with IP: 169.254.0.8 and
Network adapter eth0 ia activated with obtain IP automatic.

And I have the USB k+dcan connected to the host machine and use com3.
Then connected serial port from physical com3 to com1 in VM.
(It works with Rheingold)

Is this all correct?

[babyfaby]

Originally Posted by Johan_G

Ok thanks, how about the .ini settings?

Edibas.ini:

Interface = std: obd
#interface = remote

TCP
Remotehost =192.168.68.40
Port =6801

Microsoft loopback adapter called USB is activated with IP: 169.254.0.8 and
Network adapter eth0 ia activated with obtain IP automatic.

And I have the USB k+dcan connected to the host machine and use com3.
Then connected serial port from physical com3 to com1 in VM.
(It works with Rheingold)

Is this all correct?

I'll be back home tomorrow evening, I'll check my ediabas.ini and will keep you advised

[Johan_G]

Originally Posted by babyfaby

I'll be back home tomorrow evening, I'll check my ediabas.ini and will keep you advised

Thank you!

[babyfaby]

Originally Posted by Johan_G

Thank you!

;#################
;# EDIABAS 7.3.0 #
;#################

;================================================= ============================
[Configuration]
;================================================= ============================
Interface = STD:OBD

#Interface = REMOTE

Simulation = 0

EcuPath = C:\EDIABAS\ECU
SimulationPath = C:\EDIABAS\SIM
TracePath = C:\EDIABAS\TRACE
TraceSize = 1024

ApiTrace = 0
IfhTrace = 0
; IfhnTrace = 0

; SystemTraceSys = 0
; SystemTraceBip = 0
; SystemTraceIfh = 0
; SystemTraceNet = 0

; BipDebugLevel = 0
; BipErrorLevel = 0

UbattHandling = 0
IgnitionHandling = 0
ClampHandling = 0

RetryComm = 0
SystemResults = 1
TaskPriority = 10

; CodeMapping = C:\EDIABAS\BIN\ansi2oem.tab
; LoadWin32 = 0

NetworkProtocol = TCP

; --- neu ab EDIABAS 7.2.0 ---------------------------------------------------
ShowIcon = 1
LogLevel = 0
TraceBuffering = 0
TraceHistory = 0
TraceSync = 1
; TraceWriter = <FilePathName>

;================================================= ============================
[TCP]
;================================================= ============================
RemoteHost = 192.168.68.40
Port = 6801
TimeoutConnect = 2000
TimeoutReceive = 2000
TimeoutFunction = 10000
; TimeResponsePending = 5000
; DisconnectOnApiEnd = 1
; InitCmd0 = FE,04,00,03,01
; InitCmd1 = FD,05,00,03,01

;================================================= ============================
[XEthernet]
;================================================= ============================
RemoteHost = Autodetect
HeaderFormat = 0
TesterAddress = F4,F5
ControlPort = 6811
DiagnosticPort = 6801
TimeoutConnect = 20000

;================================================= ============================
[IfhProxy]
;================================================= ============================
Port = 6700


;################################################# ############################
;################################################# ############################
;## ausführliche Variante von EDIABAS.ini (mit Kurz-Info und Default) ##
;################################################# ############################
;################################################# ############################

;================================================= ============================
; EDIABAS Basic Configuration
; [Configuration]
;================================================= ============================

;### new Configuration elements since EDIABAS 7.2 ############################

;-----------------------------------------------------------------------------
; ShowIcon
; Description : Enable/Disable EDIABAS-Icon in System-Tray
; Value : 0 = EDIABAS-Icon disabled
; 1 = EDIABAS-Icon enabled
; Default = 1
; ShowIcon = 1

;-----------------------------------------------------------------------------
; LogLevel
; Description : Logging of fatal faults in EDIABAS.log
; Value : 0 = Logging disabled
; 1 = Logging enabled
; Default = 0
; LogLevel = 0

;-----------------------------------------------------------------------------
; TraceBuffering
; Description : Manner of Opening/Closing of Trace-Files
; Value : 0 = Opening/Closing after every dump
; 1 = Trace-Files stay open
; Default = 0
; TraceBuffering = 0

;-----------------------------------------------------------------------------
; TraceHistory
; Description : Number of History-Trace-Files
; Value : 0 .. 999
; Default = 0
; TraceHistory = 0

;-----------------------------------------------------------------------------
; TraceSync
; Description : Synchronisation of Trace files
; Value : 0 = Synchronisation disabled
; 1 = Synchronisation enabled
; Default = 1
; TraceSync = 1

;-----------------------------------------------------------------------------
; TraceWriter
; Description : FilePathName of a private TraceWriter
; Default = . (Default-TraceWriter "TWFile32.dll")
; TraceWriter = .


;### older Configuration elements till EDIABAS 7.1 ###########################

;-----------------------------------------------------------------------------
; Simulation
; Description : Enable/Disable ECU simulation
; Value : 0 = Simulation disabled
; 1 = Simulation enabled
; Default = 0
; Simulation = 0

;-----------------------------------------------------------------------------
; EcuPath
; Description : ECU file path
; Default = .
; EcuPath = C:\EC-Apps\EDIABAS\ECU

;-----------------------------------------------------------------------------
; SimulationPath
; Description : Simulation file path
; Default = .
; SimulationPath = C:\EC-Apps\EDIABAS\SIM

;-----------------------------------------------------------------------------
; TracePath
; Description : Trace file path
; Default = .
; TracePath = C:\EC-Apps\EDIABAS\TRACE

;-----------------------------------------------------------------------------
; TraceSize
; Description : Maximum size of each trace file [KB]
; Value : 0 .. 32767
; Default = 1024
; TraceSize = 1024

;-----------------------------------------------------------------------------
; ApiTrace
; Description : Enable/Disable API/User trace
; Value : 0 = Trace disabled
; 1 = User trace
; 2 = User trace + time stamp
; 3 = User trace + time stamp + process id (Win32)
; 4 = Function trace
; 5 = Function trace + time stamp
; 6 = Function trace + time stamp + timing
; 7 = Function trace + time stamp + timing + process id (Win32)
; 8 = Debug trace
; Default = 0
; ApiTrace = 0

;-----------------------------------------------------------------------------
; IfhTrace
; Description : Enable/Disable IFH trace
; Value : 0 = Trace disabled
; 1 = User trace
; 2 = User trace + interface
; 3 = User trace + interface + time stamp
; Default = 0
; IfhTrace = 0

;-----------------------------------------------------------------------------
; IfhnTrace
; Description : Enable/Disable IFH network trace (with XREMOTE)
; Value : 0 = Trace disabled
; 1 = User trace
; 2 = User trace + interface
; 3 = User trace + interface + time stamp
; Default = 0
; IfhnTrace = 0

;-----------------------------------------------------------------------------
; SystemTraceSys
; Description : Enable/Disable system trace (runtime system)
; Value : 0 = Trace disabled
; Trace levels 1 .. 7
; Default = 0
; SystemTraceSys = 0

;-----------------------------------------------------------------------------
; SystemTraceBip
; Description : Enable/Disable BIP trace (runtime system)
; Value : 0 = Trace disabled
; Trace levels 1 .. 7
; Default = 0
; SystemTraceBip = 0

;-----------------------------------------------------------------------------
; SystemTraceIfh
; Description : Enable/Disable IFH system trace
; Value : 0 = Trace disabled
; Trace levels 1 .. 7
; Default = 0
; SystemTraceIfh = 0

;-----------------------------------------------------------------------------
; SystemTraceNet
; Description : Enable/Disable network trace
; Value : 0 = Trace disabled
; Trace levels 1 .. 7
; Default = 0
; SystemTraceNet = 0

;-----------------------------------------------------------------------------
; BipDebugLevel
; Description : BIP debug level of ECU files
; Value : 0 .. 32767
; Default = 0
; BipDebugLevel = 0

;-----------------------------------------------------------------------------
; BipErrorLevel
; Description : BIP error level of ECU files
; Value : 0 .. 32767
; Default = 0
; BipErrorLevel = 0

;-----------------------------------------------------------------------------
; UbattHandling
; Description : Ubatt ON/OFF handling
; Value : 0 = Ubatt ON/OFF: No EDIABAS error
; 1 = Ubatt ON/OFF: EDIABAS error
; Default = 1
; UbattHandling = 0

;-----------------------------------------------------------------------------
; IgnitionHandling
; Description : Ignition ON/OFF handling
; Value : 0 = Ignition ON/OFF: No EDIABAS error
; 1 = Ignition ON/OFF: EDIABAS error
; Default = 1
; IgnitionHandling = 0

;-----------------------------------------------------------------------------
; ClampHandling
; Description : automatic check of clamps for Ubatt and Ignition
; Value : 0 = no automatic clamp check with send_and_receive
; 1 = automatic clamp check with send_and_receive
; Default = 1
; ClampHandling = 1

;-----------------------------------------------------------------------------
; RetryComm
; Description : Repeat failed communication automatically (1x)
; Value : 0 = Retry disabled
; 1 = Retry enabled (1x)
; Default = 1
; RetryComm = 1

;-----------------------------------------------------------------------------
; SystemResults
; Description : Enable/Disable system results (ubatt/ignition/jobstatus)
; Value : 0 = Disable system results
; 1 = Enable system results
; Default = 1
; SystemResults = 1

;-----------------------------------------------------------------------------
; TaskPriority
; Description : EDIABAS process/thread priority (only Win32/16)
; Value : 0 = Optimal EDIABAS performance = 8
; 1 = Minimal EDIABAS performance
; ..
; 10 = Maximal EDIABAS performance
; Default = 0
; TaskPriority = 0

;-----------------------------------------------------------------------------
; CodeMapping
; Description : Character mapping file path
; Default = .
; CodeMapping = C:\EC-Apps\EDIABAS\BIN\ansi2oem.tab

;-----------------------------------------------------------------------------
; LoadWin32
; Description : Map EDIABAS Win16 calls to EDIABAS Win32
; Value : 0 = Win16/32 Mapping disabled (Win16-->Win16)
; 1 = Win16/32 Mapping enabled (Win16-->Win32)
; Default = 0 for Windows 9x/Me
; Default = 1 for Windows NT4/2000/XP
; LoadWin32 = 0

;-----------------------------------------------------------------------------
; NetworkProtocol
; Description : Network protocol
; Default =
; NetworkProtocol = TCP

;************************************************* ****************************
; Interface
; Description : Connected diagnosis interface
; Default = EDIC
; Interface = STD:FUNK

; Additional information (in German) :
; Bitte beachten: Der HW-Treiber fuer das Interface muss installiert sein!

;................................................. ............................
; Interface = STD:FUNK
; Beschreibung : Funk-Diagnose Interface MDA von Fa. Siemens
; Installation : keine
; INI-Datei : FUNK.INI
; Ansprechpartner: Manuel.Rothenberger@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = STD:OMITEC
; Beschreibung : Nachfolger von OBD / enthält CAN-Anbindung / Anschluss an OBD-Dose
; Installation : \EDIABAS\HARDWARE\OMITEC\AnleitungfuerOMITECInstal lation.pdf
; INI-Datei : siehe \EDIABAS\HARDWARE\OMITEC\Omitec_Doku.pdf
; Ansprechpartner: Reinhold.Drexel@bmw.de
; WINDOWS-Freig. : siehe \EDIABAS\HARDWARE\OMITEC\Omitec_Doku.pdf

;................................................. ............................
; Interface = STD:OBD
; Beschreibung : Serieller Pegelwandler (Nachfolger von ADS / Anschluss an OBD-Dose)
; Installation : \EDIABAS\HARDWARE\OBD\ODBSETUP (nur noetig fuer WIN NT4, WIN 2000, WIN XP)
; INI-Datei : siehe \EDIABAS\HARDWARE\OBD\OBD_DOKU.pdf
; Ansprechpartner: Reinhold.Drexel@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = EDIC
; Beschreibung : Anbindung über K-Line
; HW-Derivate : PC-Card, PCMCIA , W-LAN (Interface von Fa. Softing)
; Installation : \EDIABAS\HARDWARE\EDIC\SETUP.EXE
; INI-Datei : EDICFW.INI, EDICHW.INI
; Ansprechpartner
; * EDIC-PC : Gerd.Huber@bmw.de
; * PCMCIA : Gerd.Huber@bmw.de
; * EDIC-NET : (Richard.Kolbeck@bmw.de)
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = EDICC
; Beschreibung : Anbindung über K-Line
; HW-Derivate : PC-Card, PCMCIA , W-LAN (Interface von Fa. Softing)
; Installation : \EDIABAS\HARDWARE\EDIC\SETUP.EXE
; INI-Datei : EDICFW.INI, EDICHW.INI, XEDICC.INI
; Ansprechpartner
; * EDIC-PC : Gerd.Huber@bmw.de
; * PCMCIA : Gerd.Huber@bmw.de
; * EDIC-NET : (Richard.Kolbeck@bmw.de)
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = STD:CAN
; Beschreibung : PCMCIA CAN-Interface CanCardX von Fa. Vector
; Installation : keine (ausser Installation der CAN-Karte)
; INI-Datei : CAN32.INI
; Ansprechpartner: FLASH.SERVICE@BMW.DE (Hotline)
; WINDOWS-Freig. : !nicht mehr im Paket enthalten!

;................................................. ............................
; Interface = REMOTE
; Beschreibung : Anbindung eines EDIABAS-Interfaces über TCP/IP (für Normalbetrieb)
; Installation : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port)
; INI-Datei : keine
; Ansprechpartner
; * Remote-PC : Gerd.Huber@bmw.de => Referenz@bmw.de
; * OP(P)S : Michael.Rowedder@bmw.de
; * ICOM,Fertig. : ! keine Verwendung !
; * ICOM,Vertrieb: Robert.Schwinn@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = REMOTE:name
; Beschreibung : Anbindung eines EDIABAS-Interfaces über TCP/IP (für Parallelbetrieb)
; Installation : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port)
; INI-Datei : REMOTE.INI (insbesondere für Parallelbetrieb notwendig)
; In REMOTE.INI stehen unter [name] spezif. Einstellungen(z.B.: RemoteHost, Port).
; Ansprechpartner
; * Remote-PC : ! momentan keine Verwendung !
; * OP(P)S : Michael.Rowedder@bmw.de
; * ICOM,Fertig. : ! keine Verwendung !
; * ICOM,Vertrieb: Robert.Schwinn@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = RPLUS
; Beschreibung : Anbindung eines EDIABAS-Interfaces über TCP/IP (für PROXY-Betrieb)
; Installation : Anpassung der Einträge in [TCP] auf beiden Seiten (insb.: RemoteHost, Port)
; INI-Datei : keine
; Ansprechpartner
; * Remote-PC : ! keine Verwendung !
; * OP(P)S : ! momentan keine Verwendung !
; * ICOM,Fertig. : Manuel.Rothenberger@bmw.de
; * ICOM,Vertrieb: ! momentan keine Verwendung !
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = RPLUS:name (z.B.:RPLUS:ICOM_P)
; Beschreibung : Anbindung des EDIABAS-Interfaces ICOM über TCP/IP
; Installation : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port) in den INI-Dateien
; INI-Datei : RPLUS.INI (Nutzung im Zusammenhang mit dem Interface ICOM)
; In RPLUS.INI stehen unter [name] spezif. Einstellungen(z.B.: RemoteHost, Port).
; Ansprechpartner
; * Remote-PC : ! keine Verwendung !
; * OP(P)S : ! momentan keine Verwendung !
; * ICOM,Fertig. : Manuel.Rothenberger@bmw.de
; * ICOM,Vertrieb: ! momentan keine Verwendung !
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = ENET
; Beschreibung : Anbindung über Ethernet
; Installation : Anpassung der Einträge in [XEthernet] (insb.: RemoteHost)
; INI-Datei : ENET.INI (insbesondere für Parallelbetrieb notwendig)
; Ansprechpartner: Gerd.Huber@bmw.de => Referenz@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Nein
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja
; WIN 7 64-Bit : Ja

;................................................. ............................
; Interface = PROXY:<Interface>
; z.B. Interface = PROXY:STD:FUNK
; z.B. Interface = PROXY:ENET
;
; Beschreibung : EDIABAS wird im PROXY-Modus betrieben
; Installation : hängt vom benutzten Interface ab
; INI-Datei : hängt vom benutzten Interface ab
; Ansprechparter : Gerd.Huber@bmw.de => Referenz@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Nein
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;************************************************* ****************************
; Konfigurationslemente, die existieren,
; aber nicht in EDIABAS.ini geändert werden können

;-----------------------------------------------------------------------------
; BipEcuFile
; Description : Dateititel der aktuell geladenen SGBD
; (nur gültig während einer Job-Verarbeitung)
; Value : String
; Default = -

;-----------------------------------------------------------------------------
; EdiabasIniPath
; Description : Pfad der verwendeten EDIABAS.ini
; Value : String
; Default = -

;-----------------------------------------------------------------------------
; EdiabasVersion
; Description : verwendete EDIABAS-Version
; Value : String
; Default = -

;-----------------------------------------------------------------------------
; IfhVersion
; Description : verwendete IFH-Version
; Value : String
; Default = -

;-----------------------------------------------------------------------------
; Session
; Description : Name der EDIABAS-Session
; Value : String
; Default = -


;================================================= ============================
; TCP/IP Configuration
; [TCP]
;================================================= ============================

;-----------------------------------------------------------------------------
; RemoteHost
; Description : server address/name
; Default = -
; RemoteHost = LMUC203404

;-----------------------------------------------------------------------------
; Port
; Description : IP communication port
; Value : 1000 < port < 30000
;
; Spezialfall OP(P)S / ICOM:
; Value : 6801 ;OBD-Treiber (CAN)
; Value : 6802 ;Most-Treiber
;
; Default = -
; Port = 3000
;
; weitere Details siehe Dokumentationen

;-----------------------------------------------------------------------------
; TimeoutConnect
; Description : Timeout for establishing the connection
; Value : 1000 ... 59000
; Default = 5000
; TimeoutConnect = 2000

;-----------------------------------------------------------------------------
; TimeoutReceive
; Description : Timeout for receiving a message
; Value : 1000 ... 59000
; Default = 5000
; TimeoutReceive = 2000

;-----------------------------------------------------------------------------
; TimeoutFunction
; Description : Timeout for a long function
; Value : 5000 ... 59000
; Default = 59000
; TimeoutFunction = 10000

;-----------------------------------------------------------------------------
; TimeResponsePending
; Description : Time between alive-messages
; Value : 500 ... 59000
; Default = 2000
; TimeResponsePending = 5000

;-----------------------------------------------------------------------------
; DisconnectOnApiEnd
; Description : Enable/Disable Disconnection with function call ApiEnd
; Value : 0 = Disconnection disabled
; 1 = Disconnection enabled
; Default = 0
; DisconnectOnApiEnd = 1

;-----------------------------------------------------------------------------
; InitCmd<n>
; Description : Initialization command <n> (normally for OPPS)
; Default =
; InitCmd0 = FE,04,00,03,01
; InitCmd1 = FD,05,00,03,01


;================================================= ============================
; XETHERNET Configuration
; [XEthernet]
;================================================= ============================

;-----------------------------------------------------------------------------
; RemoteHost
; Description : server address/name
; Value : Autodetect
; 169.254.1.1 ; Beispiel
; 192.168.100.1 ; Beispiel
; Default =
; RemoteHost = Autodetect

;-----------------------------------------------------------------------------
; IfhRemoteHost
; Description : server address/name
; Value : Autodetect
; 169.254.1.1 ; Beispiel
; 192.168.100.1 ; Beispiel
; Default =
; IfhRemoteHost = Autodetect

;-----------------------------------------------------------------------------
; HeaderFormat
; Description : type of header
; Value : 0 ; 6Byte Header (B-Muster)
; 1 ; 3Byte Header (A-Muster)
; Default = 0
; HeaderFormat = 0

;-----------------------------------------------------------------------------
; TesterAddress
; Description : list of permitted tester adresses
; Value : F4 ; F1 durch F4 ersetzen
; F5 ; F1 durch F5 ersetzen
; F4,F5 ; F1 zuerst durch F4 ersetzen, dann F1 durch F5 ersetzen
; F5,F4 ; F1 zuerst durch F5 ersetzen, dann F1 durch F4 ersetzen
; Default = -
; TesterAddress = F4,F5

;-----------------------------------------------------------------------------
; ControlPort
; Description : port of control channel of TCP connection to ZGW
; Value : 1000 < port < 59000
; Default = 6811
; ControlPort = 6811

;-----------------------------------------------------------------------------
; DiagnosticPort
; Description : port of diagnostic channel of TCP connection to ZGW
; Value : 1000 < port < 59000
; Default = 6801
; DiagnosticPort = 6801

;-----------------------------------------------------------------------------
; TimeoutConnect
; Description : timeout in ms for connection to ZGW
; Value : 1000 ... 59000
; Default = 20000
; TimeoutConnect = 20000


;================================================= ============================
; XPROXY Configuration
; [IfhProxy]
;================================================= ============================

;-----------------------------------------------------------------------------
; Port
; Description : IP base proxy port
; Value : 1000 < port < 30000
; Ports : +0 = unknown interface
; +1 = EDIC
; +2 = EDICC
; +3 = ENET
; +4 = STD
; +5 = REMOT
; Default = 6700
; Port = 6700


;================================================= ============================
; End Of File EDIABAS.ini
;================================================= ============================

[Johan_G]

Originally Posted by babyfaby

;#################
;# EDIABAS 7.3.0 #
;#################

;================================================= ============================
[Configuration]
;================================================= ============================
Interface = STD:OBD

#Interface = REMOTE

Simulation = 0

EcuPath = C:\EDIABAS\ECU
SimulationPath = C:\EDIABAS\SIM
TracePath = C:\EDIABAS\TRACE
TraceSize = 1024

ApiTrace = 0
IfhTrace = 0
; IfhnTrace = 0

; SystemTraceSys = 0
; SystemTraceBip = 0
; SystemTraceIfh = 0
; SystemTraceNet = 0

; BipDebugLevel = 0
; BipErrorLevel = 0

UbattHandling = 0
IgnitionHandling = 0
ClampHandling = 0

RetryComm = 0
SystemResults = 1
TaskPriority = 10

; CodeMapping = C:\EDIABAS\BIN\ansi2oem.tab
; LoadWin32 = 0

NetworkProtocol = TCP

; --- neu ab EDIABAS 7.2.0 ---------------------------------------------------
ShowIcon = 1
LogLevel = 0
TraceBuffering = 0
TraceHistory = 0
TraceSync = 1
; TraceWriter = <FilePathName>

;================================================= ============================
[TCP]
;================================================= ============================
RemoteHost = 192.168.68.40
Port = 6801
TimeoutConnect = 2000
TimeoutReceive = 2000
TimeoutFunction = 10000
; TimeResponsePending = 5000
; DisconnectOnApiEnd = 1
; InitCmd0 = FE,04,00,03,01
; InitCmd1 = FD,05,00,03,01

;================================================= ============================
[XEthernet]
;================================================= ============================
RemoteHost = Autodetect
HeaderFormat = 0
TesterAddress = F4,F5
ControlPort = 6811
DiagnosticPort = 6801
TimeoutConnect = 20000

;================================================= ============================
[IfhProxy]
;================================================= ============================
Port = 6700


;################################################# ############################
;################################################# ############################
;## ausführliche Variante von EDIABAS.ini (mit Kurz-Info und Default) ##
;################################################# ############################
;################################################# ############################

;================================================= ============================
; EDIABAS Basic Configuration
; [Configuration]
;================================================= ============================

;### new Configuration elements since EDIABAS 7.2 ############################

;-----------------------------------------------------------------------------
; ShowIcon
; Description : Enable/Disable EDIABAS-Icon in System-Tray
; Value : 0 = EDIABAS-Icon disabled
; 1 = EDIABAS-Icon enabled
; Default = 1
; ShowIcon = 1

;-----------------------------------------------------------------------------
; LogLevel
; Description : Logging of fatal faults in EDIABAS.log
; Value : 0 = Logging disabled
; 1 = Logging enabled
; Default = 0
; LogLevel = 0

;-----------------------------------------------------------------------------
; TraceBuffering
; Description : Manner of Opening/Closing of Trace-Files
; Value : 0 = Opening/Closing after every dump
; 1 = Trace-Files stay open
; Default = 0
; TraceBuffering = 0

;-----------------------------------------------------------------------------
; TraceHistory
; Description : Number of History-Trace-Files
; Value : 0 .. 999
; Default = 0
; TraceHistory = 0

;-----------------------------------------------------------------------------
; TraceSync
; Description : Synchronisation of Trace files
; Value : 0 = Synchronisation disabled
; 1 = Synchronisation enabled
; Default = 1
; TraceSync = 1

;-----------------------------------------------------------------------------
; TraceWriter
; Description : FilePathName of a private TraceWriter
; Default = . (Default-TraceWriter "TWFile32.dll")
; TraceWriter = .


;### older Configuration elements till EDIABAS 7.1 ###########################

;-----------------------------------------------------------------------------
; Simulation
; Description : Enable/Disable ECU simulation
; Value : 0 = Simulation disabled
; 1 = Simulation enabled
; Default = 0
; Simulation = 0

;-----------------------------------------------------------------------------
; EcuPath
; Description : ECU file path
; Default = .
; EcuPath = C:\EC-Apps\EDIABAS\ECU

;-----------------------------------------------------------------------------
; SimulationPath
; Description : Simulation file path
; Default = .
; SimulationPath = C:\EC-Apps\EDIABAS\SIM

;-----------------------------------------------------------------------------
; TracePath
; Description : Trace file path
; Default = .
; TracePath = C:\EC-Apps\EDIABAS\TRACE

;-----------------------------------------------------------------------------
; TraceSize
; Description : Maximum size of each trace file [KB]
; Value : 0 .. 32767
; Default = 1024
; TraceSize = 1024

;-----------------------------------------------------------------------------
; ApiTrace
; Description : Enable/Disable API/User trace
; Value : 0 = Trace disabled
; 1 = User trace
; 2 = User trace + time stamp
; 3 = User trace + time stamp + process id (Win32)
; 4 = Function trace
; 5 = Function trace + time stamp
; 6 = Function trace + time stamp + timing
; 7 = Function trace + time stamp + timing + process id (Win32)
; 8 = Debug trace
; Default = 0
; ApiTrace = 0

;-----------------------------------------------------------------------------
; IfhTrace
; Description : Enable/Disable IFH trace
; Value : 0 = Trace disabled
; 1 = User trace
; 2 = User trace + interface
; 3 = User trace + interface + time stamp
; Default = 0
; IfhTrace = 0

;-----------------------------------------------------------------------------
; IfhnTrace
; Description : Enable/Disable IFH network trace (with XREMOTE)
; Value : 0 = Trace disabled
; 1 = User trace
; 2 = User trace + interface
; 3 = User trace + interface + time stamp
; Default = 0
; IfhnTrace = 0

;-----------------------------------------------------------------------------
; SystemTraceSys
; Description : Enable/Disable system trace (runtime system)
; Value : 0 = Trace disabled
; Trace levels 1 .. 7
; Default = 0
; SystemTraceSys = 0

;-----------------------------------------------------------------------------
; SystemTraceBip
; Description : Enable/Disable BIP trace (runtime system)
; Value : 0 = Trace disabled
; Trace levels 1 .. 7
; Default = 0
; SystemTraceBip = 0

;-----------------------------------------------------------------------------
; SystemTraceIfh
; Description : Enable/Disable IFH system trace
; Value : 0 = Trace disabled
; Trace levels 1 .. 7
; Default = 0
; SystemTraceIfh = 0

;-----------------------------------------------------------------------------
; SystemTraceNet
; Description : Enable/Disable network trace
; Value : 0 = Trace disabled
; Trace levels 1 .. 7
; Default = 0
; SystemTraceNet = 0

;-----------------------------------------------------------------------------
; BipDebugLevel
; Description : BIP debug level of ECU files
; Value : 0 .. 32767
; Default = 0
; BipDebugLevel = 0

;-----------------------------------------------------------------------------
; BipErrorLevel
; Description : BIP error level of ECU files
; Value : 0 .. 32767
; Default = 0
; BipErrorLevel = 0

;-----------------------------------------------------------------------------
; UbattHandling
; Description : Ubatt ON/OFF handling
; Value : 0 = Ubatt ON/OFF: No EDIABAS error
; 1 = Ubatt ON/OFF: EDIABAS error
; Default = 1
; UbattHandling = 0

;-----------------------------------------------------------------------------
; IgnitionHandling
; Description : Ignition ON/OFF handling
; Value : 0 = Ignition ON/OFF: No EDIABAS error
; 1 = Ignition ON/OFF: EDIABAS error
; Default = 1
; IgnitionHandling = 0

;-----------------------------------------------------------------------------
; ClampHandling
; Description : automatic check of clamps for Ubatt and Ignition
; Value : 0 = no automatic clamp check with send_and_receive
; 1 = automatic clamp check with send_and_receive
; Default = 1
; ClampHandling = 1

;-----------------------------------------------------------------------------
; RetryComm
; Description : Repeat failed communication automatically (1x)
; Value : 0 = Retry disabled
; 1 = Retry enabled (1x)
; Default = 1
; RetryComm = 1

;-----------------------------------------------------------------------------
; SystemResults
; Description : Enable/Disable system results (ubatt/ignition/jobstatus)
; Value : 0 = Disable system results
; 1 = Enable system results
; Default = 1
; SystemResults = 1

;-----------------------------------------------------------------------------
; TaskPriority
; Description : EDIABAS process/thread priority (only Win32/16)
; Value : 0 = Optimal EDIABAS performance = 8
; 1 = Minimal EDIABAS performance
; ..
; 10 = Maximal EDIABAS performance
; Default = 0
; TaskPriority = 0

;-----------------------------------------------------------------------------
; CodeMapping
; Description : Character mapping file path
; Default = .
; CodeMapping = C:\EC-Apps\EDIABAS\BIN\ansi2oem.tab

;-----------------------------------------------------------------------------
; LoadWin32
; Description : Map EDIABAS Win16 calls to EDIABAS Win32
; Value : 0 = Win16/32 Mapping disabled (Win16-->Win16)
; 1 = Win16/32 Mapping enabled (Win16-->Win32)
; Default = 0 for Windows 9x/Me
; Default = 1 for Windows NT4/2000/XP
; LoadWin32 = 0

;-----------------------------------------------------------------------------
; NetworkProtocol
; Description : Network protocol
; Default =
; NetworkProtocol = TCP

;************************************************* ****************************
; Interface
; Description : Connected diagnosis interface
; Default = EDIC
; Interface = STD:FUNK

; Additional information (in German) :
; Bitte beachten: Der HW-Treiber fuer das Interface muss installiert sein!

;................................................. ............................
; Interface = STD:FUNK
; Beschreibung : Funk-Diagnose Interface MDA von Fa. Siemens
; Installation : keine
; INI-Datei : FUNK.INI
; Ansprechpartner: Manuel.Rothenberger@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = STD:OMITEC
; Beschreibung : Nachfolger von OBD / enthält CAN-Anbindung / Anschluss an OBD-Dose
; Installation : \EDIABAS\HARDWARE\OMITEC\AnleitungfuerOMITECInstal lation.pdf
; INI-Datei : siehe \EDIABAS\HARDWARE\OMITEC\Omitec_Doku.pdf
; Ansprechpartner: Reinhold.Drexel@bmw.de
; WINDOWS-Freig. : siehe \EDIABAS\HARDWARE\OMITEC\Omitec_Doku.pdf

;................................................. ............................
; Interface = STD:OBD
; Beschreibung : Serieller Pegelwandler (Nachfolger von ADS / Anschluss an OBD-Dose)
; Installation : \EDIABAS\HARDWARE\OBD\ODBSETUP (nur noetig fuer WIN NT4, WIN 2000, WIN XP)
; INI-Datei : siehe \EDIABAS\HARDWARE\OBD\OBD_DOKU.pdf
; Ansprechpartner: Reinhold.Drexel@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = EDIC
; Beschreibung : Anbindung über K-Line
; HW-Derivate : PC-Card, PCMCIA , W-LAN (Interface von Fa. Softing)
; Installation : \EDIABAS\HARDWARE\EDIC\SETUP.EXE
; INI-Datei : EDICFW.INI, EDICHW.INI
; Ansprechpartner
; * EDIC-PC : Gerd.Huber@bmw.de
; * PCMCIA : Gerd.Huber@bmw.de
; * EDIC-NET : (Richard.Kolbeck@bmw.de)
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = EDICC
; Beschreibung : Anbindung über K-Line
; HW-Derivate : PC-Card, PCMCIA , W-LAN (Interface von Fa. Softing)
; Installation : \EDIABAS\HARDWARE\EDIC\SETUP.EXE
; INI-Datei : EDICFW.INI, EDICHW.INI, XEDICC.INI
; Ansprechpartner
; * EDIC-PC : Gerd.Huber@bmw.de
; * PCMCIA : Gerd.Huber@bmw.de
; * EDIC-NET : (Richard.Kolbeck@bmw.de)
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = STD:CAN
; Beschreibung : PCMCIA CAN-Interface CanCardX von Fa. Vector
; Installation : keine (ausser Installation der CAN-Karte)
; INI-Datei : CAN32.INI
; Ansprechpartner: FLASH.SERVICE@BMW.DE (Hotline)
; WINDOWS-Freig. : !nicht mehr im Paket enthalten!

;................................................. ............................
; Interface = REMOTE
; Beschreibung : Anbindung eines EDIABAS-Interfaces über TCP/IP (für Normalbetrieb)
; Installation : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port)
; INI-Datei : keine
; Ansprechpartner
; * Remote-PC : Gerd.Huber@bmw.de => Referenz@bmw.de
; * OP(P)S : Michael.Rowedder@bmw.de
; * ICOM,Fertig. : ! keine Verwendung !
; * ICOM,Vertrieb: Robert.Schwinn@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = REMOTE:name
; Beschreibung : Anbindung eines EDIABAS-Interfaces über TCP/IP (für Parallelbetrieb)
; Installation : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port)
; INI-Datei : REMOTE.INI (insbesondere für Parallelbetrieb notwendig)
; In REMOTE.INI stehen unter [name] spezif. Einstellungen(z.B.: RemoteHost, Port).
; Ansprechpartner
; * Remote-PC : ! momentan keine Verwendung !
; * OP(P)S : Michael.Rowedder@bmw.de
; * ICOM,Fertig. : ! keine Verwendung !
; * ICOM,Vertrieb: Robert.Schwinn@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = RPLUS
; Beschreibung : Anbindung eines EDIABAS-Interfaces über TCP/IP (für PROXY-Betrieb)
; Installation : Anpassung der Einträge in [TCP] auf beiden Seiten (insb.: RemoteHost, Port)
; INI-Datei : keine
; Ansprechpartner
; * Remote-PC : ! keine Verwendung !
; * OP(P)S : ! momentan keine Verwendung !
; * ICOM,Fertig. : Manuel.Rothenberger@bmw.de
; * ICOM,Vertrieb: ! momentan keine Verwendung !
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = RPLUS:name (z.B.:RPLUS:ICOM_P)
; Beschreibung : Anbindung des EDIABAS-Interfaces ICOM über TCP/IP
; Installation : Anpassung der Einträge in [TCP] auf beiden Seiten (ins.: RemoteHost, Port) in den INI-Dateien
; INI-Datei : RPLUS.INI (Nutzung im Zusammenhang mit dem Interface ICOM)
; In RPLUS.INI stehen unter [name] spezif. Einstellungen(z.B.: RemoteHost, Port).
; Ansprechpartner
; * Remote-PC : ! keine Verwendung !
; * OP(P)S : ! momentan keine Verwendung !
; * ICOM,Fertig. : Manuel.Rothenberger@bmw.de
; * ICOM,Vertrieb: ! momentan keine Verwendung !
; WINDOWS-Freig. : WIN NT 4.0 : Ja
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;................................................. ............................
; Interface = ENET
; Beschreibung : Anbindung über Ethernet
; Installation : Anpassung der Einträge in [XEthernet] (insb.: RemoteHost)
; INI-Datei : ENET.INI (insbesondere für Parallelbetrieb notwendig)
; Ansprechpartner: Gerd.Huber@bmw.de => Referenz@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Nein
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja
; WIN 7 64-Bit : Ja

;................................................. ............................
; Interface = PROXY:<Interface>
; z.B. Interface = PROXY:STD:FUNK
; z.B. Interface = PROXY:ENET
;
; Beschreibung : EDIABAS wird im PROXY-Modus betrieben
; Installation : hängt vom benutzten Interface ab
; INI-Datei : hängt vom benutzten Interface ab
; Ansprechparter : Gerd.Huber@bmw.de => Referenz@bmw.de
; WINDOWS-Freig. : WIN NT 4.0 : Nein
; WIN XP 32-Bit : Ja
; WIN 7 32-Bit : Ja

;************************************************* ****************************
; Konfigurationslemente, die existieren,
; aber nicht in EDIABAS.ini geändert werden können

;-----------------------------------------------------------------------------
; BipEcuFile
; Description : Dateititel der aktuell geladenen SGBD
; (nur gültig während einer Job-Verarbeitung)
; Value : String
; Default = -

;-----------------------------------------------------------------------------
; EdiabasIniPath
; Description : Pfad der verwendeten EDIABAS.ini
; Value : String
; Default = -

;-----------------------------------------------------------------------------
; EdiabasVersion
; Description : verwendete EDIABAS-Version
; Value : String
; Default = -

;-----------------------------------------------------------------------------
; IfhVersion
; Description : verwendete IFH-Version
; Value : String
; Default = -

;-----------------------------------------------------------------------------
; Session
; Description : Name der EDIABAS-Session
; Value : String
; Default = -


;================================================= ============================
; TCP/IP Configuration
; [TCP]
;================================================= ============================

;-----------------------------------------------------------------------------
; RemoteHost
; Description : server address/name
; Default = -
; RemoteHost = LMUC203404

;-----------------------------------------------------------------------------
; Port
; Description : IP communication port
; Value : 1000 < port < 30000
;
; Spezialfall OP(P)S / ICOM:
; Value : 6801 ;OBD-Treiber (CAN)
; Value : 6802 ;Most-Treiber
;
; Default = -
; Port = 3000
;
; weitere Details siehe Dokumentationen

;-----------------------------------------------------------------------------
; TimeoutConnect
; Description : Timeout for establishing the connection
; Value : 1000 ... 59000
; Default = 5000
; TimeoutConnect = 2000

;-----------------------------------------------------------------------------
; TimeoutReceive
; Description : Timeout for receiving a message
; Value : 1000 ... 59000
; Default = 5000
; TimeoutReceive = 2000

;-----------------------------------------------------------------------------
; TimeoutFunction
; Description : Timeout for a long function
; Value : 5000 ... 59000
; Default = 59000
; TimeoutFunction = 10000

;-----------------------------------------------------------------------------
; TimeResponsePending
; Description : Time between alive-messages
; Value : 500 ... 59000
; Default = 2000
; TimeResponsePending = 5000

;-----------------------------------------------------------------------------
; DisconnectOnApiEnd
; Description : Enable/Disable Disconnection with function call ApiEnd
; Value : 0 = Disconnection disabled
; 1 = Disconnection enabled
; Default = 0
; DisconnectOnApiEnd = 1

;-----------------------------------------------------------------------------
; InitCmd<n>
; Description : Initialization command <n> (normally for OPPS)
; Default =
; InitCmd0 = FE,04,00,03,01
; InitCmd1 = FD,05,00,03,01


;================================================= ============================
; XETHERNET Configuration
; [XEthernet]
;================================================= ============================

;-----------------------------------------------------------------------------
; RemoteHost
; Description : server address/name
; Value : Autodetect
; 169.254.1.1 ; Beispiel
; 192.168.100.1 ; Beispiel
; Default =
; RemoteHost = Autodetect

;-----------------------------------------------------------------------------
; IfhRemoteHost
; Description : server address/name
; Value : Autodetect
; 169.254.1.1 ; Beispiel
; 192.168.100.1 ; Beispiel
; Default =
; IfhRemoteHost = Autodetect

;-----------------------------------------------------------------------------
; HeaderFormat
; Description : type of header
; Value : 0 ; 6Byte Header (B-Muster)
; 1 ; 3Byte Header (A-Muster)
; Default = 0
; HeaderFormat = 0

;-----------------------------------------------------------------------------
; TesterAddress
; Description : list of permitted tester adresses
; Value : F4 ; F1 durch F4 ersetzen
; F5 ; F1 durch F5 ersetzen
; F4,F5 ; F1 zuerst durch F4 ersetzen, dann F1 durch F5 ersetzen
; F5,F4 ; F1 zuerst durch F5 ersetzen, dann F1 durch F4 ersetzen
; Default = -
; TesterAddress = F4,F5

;-----------------------------------------------------------------------------
; ControlPort
; Description : port of control channel of TCP connection to ZGW
; Value : 1000 < port < 59000
; Default = 6811
; ControlPort = 6811

;-----------------------------------------------------------------------------
; DiagnosticPort
; Description : port of diagnostic channel of TCP connection to ZGW
; Value : 1000 < port < 59000
; Default = 6801
; DiagnosticPort = 6801

;-----------------------------------------------------------------------------
; TimeoutConnect
; Description : timeout in ms for connection to ZGW
; Value : 1000 ... 59000
; Default = 20000
; TimeoutConnect = 20000


;================================================= ============================
; XPROXY Configuration
; [IfhProxy]
;================================================= ============================

;-----------------------------------------------------------------------------
; Port
; Description : IP base proxy port
; Value : 1000 < port < 30000
; Ports : +0 = unknown interface
; +1 = EDIC
; +2 = EDICC
; +3 = ENET
; +4 = STD
; +5 = REMOT
; Default = 6700
; Port = 6700


;================================================= ============================
; End Of File EDIABAS.ini
;================================================= ============================

Looks like mine.

What could be wrong?

Should I connect the USB k+dcan directly to VM instead of the host machine?
Is there any other program that should be started or just the loader/ISTA/P?

[babyfaby]

Originally Posted by Johan_G

Looks like mine.

What could be wrong?

Should I connect the USB k+dcan directly to VM instead of the host machine?
Is there any other program that should be started or just the loader/ISTA/P?

Is everything working with ISTA/D?

[Johan_G]

Originally Posted by babyfaby

Is everything working with ISTA/D?

Yes Rheingold is working, I have deleted fault codes
and change service intervall.

[Johan_G]

Originally Posted by Johan_G

Yes Rheingold is working, I have deleted fault codes
and change service intervall.

No communication with DME.

Can someone please confirm that this version of ista/p is working with k+dcan cable on BMW motorcycle?
I've got the Rheingold working on my bike.

[bmw845]

Thanks..good staff... i will update my bmw and setup some options.

[babyfaby]

Any chance to get an update V4 not light.
Is it possible to also bring French language?

Thanks for this wonderful virtual machine!

[AWDBooSTIn90]

So ive been using the V3 since I found out about it, and first of all i must say, thanks! really helped me a lot. I was having trouble getting the more specialized programs to work like ISTA & Reihngold.

Recently i set up a netbook i have, for coding. i figured id use the V3 LITE on it, since its not as fast as my HP laptop i have the full version of V3 running on.

But, i've tried downloading the sp-Daten Files Torrent under V3 LITE files. I can not get it to go past 42% finished on utrnt.

It gets to 42% pretty quickly, but then just basically stops. Is there an error? Am i doing something wrong here? Does it just not have enough seeders hosting to dwnld it?

If i COULD get it to finsish downloading i will deff seed it for a bit on my desktop that stays on all the time. LMK!

Once again, thanks for the work and time put into this, i know it takes time to source, download, install, and then set up these program's to run properly. So i appreciate posting this fort everyone on the forum. Has helped me alot, and im sure a lot of others.

I used VirtualBox and it ran great on my HP laptop (Wins7 Ultimate). Would love to set up the V3 lite on my Dell Netbook (10" Laptop - Wins7 Strtr)..