[shandormeyer]

hi there.i have m325i.the battery was replaced now they say must be rocoded.but it starts the cars.is there easer way to code it please thank u

[Faruk]

I just bought k+Dcan cable with switch on it. It came with Inpa v5.02 and v5.06 on disc. I just installed v5.06 cable connects see battery and ecu but i cant get the program working. It doesnt show any of models. F3-4-5-6.. buttons showing blank.

How can i get latest working software for my e90?

[PNW_E9One]

Is there a MAC version of this?

[SAMI1820]

Hello everyone I just bought K+Dcan cable and it say it is compatible with INPA unfortunately the disc they sent with its broken in half so now I am looking for a way to download program that will with this cable can anyone can direct me right direction I really appreciated.

[frobeau_e92]

https://gyazo.com/82a79082371175d18861576f937f9bc8

This is all that pops-up when I load INPA and I can't figure out how to get the rest of it to work. I'm on windows 10.

[waelaburezeq]

Originally Posted by ganastas

I too can code e90's and others. All the info is on another website. I turned off the gongs coded the OEM alarm to my car. Folding mirrors with the remote shut off the buld errors and led buld test on start up, you know the disco light show of you have LED's installed of stuff you can do. But be forewarned you can brick modules. So be careful and go slowly. You need about 100 bucks in startup money and a laptop. The best is when you can use the BMW DIS program for diagnostics and trouble shoot your own car.

what software and cable do you suggest?

[waelaburezeq]

Originally Posted by ganastas

I too can code e90's and others. All the info is on another website. I turned off the gongs coded the OEM alarm to my car. Folding mirrors with the remote shut off the buld errors and led buld test on start up, you know the disco light show of you have LED's installed of stuff you can do. But be forewarned you can brick modules. So be careful and go slowly. You need about 100 bucks in startup money and a laptop. The best is when you can use the BMW DIS program for diagnostics and trouble shoot your own car.

what software and cable do you suggest?

[waelaburezeq]

Originally Posted by xxxjecxxx

Update 9/14/14

Thank you Chewy for hosting the files

Download Files

http://www.dehmicro.com/bmw

Tutorial
1) Install BMW standard tools
2) Replace folders with v49
3) Install cable drivers


======================================

I can officially code BMWs, specifically E90s. check it out


Video- close all windows and sunroof with FOB

pictures - corner delete mod, digital speed on cluster



TUTORIAL
Note: all files needed are in ncsexpert.rar and DIY is a pdf as a separate file! Enjoy!

Order this cable Updated! U
http://www.one-stop-electronics.com/...&product_id=16



Program files (see link above)


DIY in PDF format

Coding examples (for 5 series)
http://forums.5series.net/topic/1060...g/page__st__15

This will be your best friend at all times, especially in the bad times
http://translate.google.com/#de|en|

I have created a video for those who are having troubles or have no idea

What can I code? What values do I have to change?
Here is a spreadsheet that Neutrino45 is administering
You have to request access to it, please do not delete anything in it.
https://spreadsheets.google.com/ccc?...CPqY7sEC#gid=0



There is A TON of information in this thread. I have tried my best to make it easy to understand if you still have questions please first

Thank you to all the members who have contributed to this thread.

Junior

hi mate,

I would start with the last link you shared for the spreadsheet codes. I purchased the cable and installed the software for BMW Coding Tool. I am interested in Folding mirror feature. However, I am not able to code it because:

In the spreadsheet, it was listed under Module "FRM (NFRM)" I didn't find this in my code list, instead I found FRM.C09 , FRM2.C09 and so on. Am I missing anything? Because even the function value "SPIEGEL_KOMFORT_EINKLAPP or ASP_KOMFORT_EINKLAPP" was not there when I searched for it.

[DimitrisM3]

Hello guys I need small help with coding performance seats what need to code to work properly!

[rmguna]

I got everything setup and communicating with my 2011 328i. After replacing the RDC module trying to reset it. Below is what I am using and what I am getting. Any help or tips is much appreciated.
Using NCS-Expertentool V4.0.1, CoAPI: V3.13.2, KrAPI: 3.0.2, Ediabas: V7.3.0
Cable I got: BMW K+DCAN OBD2 Cable Switch FTDI FT232RL Tools INPA EDIABAS NCS EXPERT ISTA
https://www.ebay.com/itm/BMW-K-DCAN-...72.m2749.l2649

Error:
[13:55:35.717] [2019-02-18] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
[13:55:35.717] [2019-02-18] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RDCKWP

[13:55:35.842] [2019-02-18] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[13:55:35.842] [2019-02-18] [SERIE] SG antwortet nicht CODIERINDEX_LESEN

[13:55:38.546] [2019-02-18] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
[13:55:38.546] [2019-02-18] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht RDCKWP

[13:55:38.664] [2019-02-18] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[13:55:38.664] [2019-02-18] [SERIE] SG antwortet nicht CODIERDATEN_LESEN

[RipplesE90]

Hi guys, long time lurker first time poster. Does anyone know what module the Reverse-Gong (for Japan) would be in? I’m trying to code this off my car but can’t find it anywhere!

[mgorman87]

Originally Posted by n00b17

So I have a 2011 E90 with xenon lamps and AEs
I wanted to increase the AE brightness, and I read/was told that I would have to code via nettodat to achieve that.

I got the nettodat.trc for my NFRM module using the NCS-Expert. Then in NCS Dummy the hex values for PWM_SL_1_FKT_BL_TFL & PWM_SL_1_FKT_SL_TFL were set to custom value 0C,2C and create the nettodat.man file (A compare shows the change correctly)

Then back to NCS-Expert, coapiCodeSgByNettoData as the basic function (supplying nettodat.man as the value for the Nettodatenliste parameter)
The jobname was kept as SG_CODIEREN while executing the job, which completed successfully.

However, when I read back the NFRM module to confirm the changes, the nettodat.trc file shows the old values.

What could I be doing wrong ??
I've used different NCS Expert profiles and the result is the same.

Make sure you don't do "Process Job" after you code by NETTODAT. I was trying this yesterday and executing the job reverts the changes

[SAMI1820]

Does Bimmer code works on E90 2006?

[JonEQuest]

I have searched and cannot find what I need. I have INPA and the main menu is in English but when I get deeper in to test DSC, bleed brakes, steering angle, etc. everything is in German which makes it really hard to keep up. I had to manually bleed my brakes after doing a DSC motor swap because I couldn't translate fast enough and errors came up, then went away, etc. I have 2008 E93 so if there is another version that doesn't work with newer cars but has more English that is fine by me.

[Black e92 Sport]

Hey bud. I'm new to this so pls be patient...
Just got youra Bimmergeeks cable and it seems to be working fine. I have been on countless blogs and have gone over FAQ's to make sure I am doing everything right. I keep getting "error in CABD!" when I try to read or write files on my '09 E92. I have spent days going over everything to make sure I am not screwing this up - Here's some background:

Win 10 laptop - com port 1, latency 1 on usb connection
NCS Expert connects but the ingition circle on INPA is not filled in, only the cable
NCS profile on Expert (manipulation unchecked)

Here isthe error log:
[23:31:55.689] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS Cod 371
[23:31:55.689] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_AUFTRAG: ERROR_ECU_UPLOAD_NOT_ACCEPTED

[23:31:55.798] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6
[23:31:55.798] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) SG_CODIEREN

================================================== ==============================
[23:34:08.107] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS TestCod 365
[23:34:08.107] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_SCHREIBEN: ERROR_ECU_UPLOAD_NOT_ACCEPTED

[23:34:08.220] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6
[23:34:08.220] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) TEST_CODIERUNG

================================================== ==============================
[23:35:28.342] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS Cod 371
[23:35:28.342] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_AUFTRAG: ERROR_ECU_UPLOAD_NOT_ACCEPTED

[23:35:28.454] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6
[23:35:28.454] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) SG_CODIEREN_OHNE_FG_AEI

================================================== ==============================

Many thanks in advance...

[m.mksuki]

hi, im new here

would like help to get vehicle order import file for vin wba3v12010p944847

use ista-p but some how have error and need the vo which i cant find (and i dont have ncsexpert or esys between

can anybody help me out

[nashville_bill]

I'm looking for help in identifying the type of cable, and software, I will need to code a 2006 330i with an n52 engine. I plan on running the software on a laptop running XP pro with 4gb of ram and it has a serial port.

I'm sure this information is in this forum, but I haven't been able to find it.

Thanks in advance,

Bill

[LMB335IS]

Originally Posted by nashville_bill

I'm looking for help in identifying the type of cable, and software, I will need to code a 2006 330i with an n52 engine. I plan on running the software on a laptop running XP pro with 4gb of ram and it has a serial port.

I'm sure this information is in this forum, but I haven't been able to find it.

Thanks in advance,

Bill

https://www.bimmergeeks.net/

Download Standard Tools for the software and visit the store for the cable.

[nashville_bill]

LMB335IS,

Thanks, I'll do that!

Bill

[badshtef]

Hello!
I own an e90 with nfrm. I was trying to code my welcome lights with fog lights. I was enable to do this, but my angel eyes doesnt light anymore when i am opening the car. To code the fog light i changed in ncs expert WL_NSL to SOFT_EINSCHALTEN, and I also checked the WL_SL_1 (which i think that are the angel eyes) and is also SOFT_EINSCHALTEN. What I am doing wrong? Any ideas? Thanks!

[Momogord]

Originally Posted by toni8284

now I tried to re-do everything, when I try to edit the profile EXPERTmode, it gives me the error with the grey (ZCSUT)

I have the exact same issue and I am struggling to understand how to solve it.

Did anyone find the root cause ?

Thanks for the tip !

[edgars74]

Hey guys.

Just got hands on a BMW 330D E93 and wanted to diagnose the car via OBD port, but it seems I'm unable to get a communication between DIS and the car.

The strange thing is there's an LED below the OBD port which doesn't seem to be original from the manufacturer.

When ignition is turned on the LED lights up.




Is it some kind of an OBD blocker?