[Airjaff]

hello, i have installed inpa from the bimmergeeks website. it all seems to work, but only the main menu is in English, as i go in deeper, like in the engine section, everything is in German. i have followed the install instructions correctly. please could anyone help me out?

[JonEQuest]

Originally Posted by edgars74

Hey guys.

Just got hands on a BMW 330D E93 and wanted to diagnose the car via OBD port, but it seems I'm unable to get a communication between DIS and the car.

The strange thing is there's an LED below the OBD port which doesn't seem to be original from the manufacturer.

When ignition is turned on the LED lights up.




Is it some kind of an OBD blocker?

I am 99% sure that is an alarm LED. I used to install alarms and sometimes people didn't want me drilling in expensive parts of the dash so we put them in a low cheaper panel. Look around and you may find a toggle or push button switch for a valet mode too.

[MrMCoding]

Neeeed help11

i have both carly and ncs expert. I have deactivated all cold and warm checks. Angel lights and indicators still flicker when engine on (no flickering when engine off)


e92 frm1. Had pre-lci xenons which i have upgraded to lci xenons. Everything else works fine but the al and side indicators. Please help

[bimmerfan1972]

Hi, new to the forums here, but have been lurking for a while trying to get my Adaptive Headlights working again. Long story, I'll make a new thread with everything that I have been through over the last few months later today.

For now, I have a (hopefully) simple question. After replacing my FRM3 adding VIN, and recoding to factory, etc, I am left with a weird anomaly. When the door is open and the car is switch on, but not running, I am getting the warning message "Ignition switched on." I did not have that before. I assume I can turn this off? Does anyone know which module that code is stored in and the name of the setting? I have all the tools, INST-D, NCS Expert, Dummy, Tool32, WINKFP, with good datens.
Thanks.

[rico_g01]

How can i edit daten frmfa.c12 to add welcome lights?

[Rjvincent]

Is there anyone that would do this remotely for me? I am afraid I will screw things up, even with the step by step. (Adaptive headlight code out)

[Joe@TopGearSolutions]

Originally Posted by Rjvincent

Is there anyone that would do this remotely for me? I am afraid I will screw things up, even with the step by step. (Adaptive headlight code out)

Yes, we can. Do you have a KDCAN cable? Shoot me a PM if you’d like for us to code it remotely for you.

[Ed7131]

How can i disable the adaptive headlight light on my 2010 e90 using bimmercode?

[sdbmwcoding]

Originally Posted by Ed7131

How can i disable the adaptive headlight light on my 2010 e90 using bimmercode?

I don't think you can, I know bimmercode has expert mode for F chassis but not sure about E chassis. Go into FRM module on bimmercode and check if there's an exert mode section. If not, then you're out of luck. You'll need ncs expert or protools

[bimmerfan1972]

Originally Posted by Ed7131

How can i disable the adaptive headlight light on my 2010 e90 using bimmercode?

You can disable it using NCSExpert.

[sdbmwcoding]

Originally Posted by MSCRoMuLuS

I am using ncs expert v4.0.1. previously I had trouble loading the MAN file into the car. With a little help, I solved it by uploading DATEN files and I was able to open the closed angel eyes. Now when I want to raise the voltage I realized that. it doesn't give error when uploading files to the car, but when I read it again, I noticed that the changes I made were not loaded and the old file was not updated. how to solve this problem. my car is bmw e90 320d 2011 lci. I hope you understand that I am using google translate.

Make sure you're using the correct profile. If you're saving trace file as man and coding and the coding is not changing then you're not using the correct profile.

[tshandonay]

Hello, new to the forum....understand I need to replay to something before I can do much so here it is. Picked up a 335d from auction a couple weeks ago. Potential disaster for sure. Spent a solid day working on getting software working to see what was going on with me car. Still dealing with everything being in German but i'm getting there.

More to come in the diesel section....

[dovymac]

Originally Posted by *********

Would love the auto close sunroof via rain sensor detection! Keep us posted!

agree mate

[mfol]

good job! i had my inpa and ncs working and then the next day bam!!! doe not work. i coded window up and down with fob and digital speedometer. and now i am stuck lol!

[eljay]

I replaced my battery and was going to register/code it using ISTA (Rheingold), but it say that "vehicle could not be identified" when I try to get information about vehicle.
I have INPA running successfully and showing Ignition ON when I try ISTA.
I did switch to Ediabas profile in ISTA config options.

What should I do to get ISTA/Rheingold working?

Thanks!

[eljay]

Anyone?

[alqoumi]

thanks for the tutorial, looking forward if i have some trouble.. Thanks

[ctuna]

Ista problems
https://www.e90post.com/forums/showthread.php?t=1581663

Usually comes from not having the correct base ware on your PC
if you followed the instructions on install to a T

Microsoft C++ full set and Netframework 4.7 or better

diagnostic manual ista/inpa
https://www.google.com/url?sa=t&rct=...xo19teM9vkTF-C
https://www.google.com/url?sa=t&rct=...7x8H3pN8h1fMuF
https://bimmerprofs.com/diagnostics-inpa-part-1/
https://www.google.com/url?sa=t&rct=...lkXEhlQYy4i9Nb
https://www.bimmerforums.com/forum/s...-P-actually-do

[bassrebel]

Just finished coding my X1 and it worked like a charm! thanks to everyone who compiled this =)

[sherazkn]

I was wondering if anyone knew how to
Code out; Angel Eye out error code

I'm installing Bav Gruppe DTM Rings and getting power for both lights from one of the halo plugs, so I wanna code out the other halo light missing error.

If possible with NCS expert or NCS Dummy, please let me know would be a great help

[rxoarnuci]

.

[rxoarnuci]

Originally Posted by sherazkn

I was wondering if anyone knew how to
Code out; Angel Eye out error code

I'm installing Bav Gruppe DTM Rings and getting power for both lights from one of the halo plugs, so I wanna code out the other halo light missing error.

If possible with NCS expert or NCS Dummy, please let me know would be a great help

COLD, HOT monitoring and CHECK in FRM module, set them to not_aktiv