[taz2ko0]

Originally Posted by E92turbo79

Are 19 and 20 the pins that would need to be swapped on the JB4 connector?

Yes.

[E92turbo79]

Originally Posted by taz2ko0

Yes.

Both sensors are still installed into downpipe, what did you mean by I only have 1 sensor now? Does the Dp fix only look at one?

[taz2ko0]

Originally Posted by E92turbo79

Both sensors are still installed into downpipe, what did you mean by I only have 1 sensor now? Does the Dp fix only look at one?

This depends on your setup. The car has two pre-sensors and two post-sensors. The fix takes the single from 1 post sensor and feeds it back to both inputs in the DME. This depends if you are using all four sensors or just two sensors (pre and post). I would need to know more about your setup to give you the most accurate advice. Send me you setup and how you are using the sensors (pre/post).

[E92turbo79]

Originally Posted by taz2ko0

This depends on your setup. The car has two pre-sensors and two post-sensors. The fix takes the single from 1 post sensor and feeds it back to both inputs in the DME. This depends if you are using all four sensors or just two sensors (pre and post). I would need to know more about your setup to give you the most accurate advice. Send me you setup and how you are using the sensors (pre/post).

Still using all 4 sensors, both pre cat sensors are in the headers before the turbo and both post cat sensors are installed into the 3” downpipe

[taz2ko0]

Originally Posted by E92turbo79

Still using all 4 sensors, both pre cat sensors are in the headers before the turbo and both post cat sensors are installed into the 3” downpipe

If you are getting a swapped code. I would uninstall the fix and reset the codes and adaptions to verify if the codes come back. If it does then you would need to verify that your post and pre-sensors are connected in the right spot. If the code does not come back then reinstall the fix and we will go from there. Just need to verify if you are getting the swapped code prior to the installation. Keep me posted.

[bmwbob89]

Do you still have these. I need them for a 2008 535XI. Let me know so I can get rid of the problem. Still has stock cats.

[taz2ko0]

Originally Posted by bmwbob89

Do you still have these. I need them for a 2008 535XI. Let me know so I can get rid of the problem. Still has stock cats.

Sent PM. Let me know if you have any questions.

[juan413]

Hi, can this work on a 2013 F30 335i pwg?

[darrien2143]

do you have any for sale?

[taz2ko0]

Originally Posted by juan413

Hi, can this work on a 2013 F30 335i pwg?

Sorry this works for the n54 and I have had reports that it works on the n52

[taz2ko0]

Originally Posted by darrien2143

do you have any for sale?

Yes I do. I pm’ed you the instructions

[taz2ko0]

for happy customers!

[taz2ko0]

[E92turbo79]

Originally Posted by taz2ko0

for happy customers!

I passed emissions!

[taz2ko0]

Bump for sourcing new parts.

[KnighTT]

PM me with purchase instructions please.
Thank you.

[taz2ko0]

Originally Posted by KnighTT

PM me with purchase instructions please.
Thank you.

PM’ed you

Thanks.

[taz2ko0]

End of the Month

[taz2ko0]

[taz2ko0]

Always in stock and ready to ship.

[taz2ko0]

Monday morning

[battlecorgi]

Pm sent