|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Angel eye brightness coding - verified values for each FRM
|
|
07-16-2018, 07:46 AM | #45 |
New Member
0
Rep 5
Posts |
I have a late 2007 E92 with NFRM FRM2_E89.C09 module.
I have successfully increased the AE voltage in DRL mode by changing just one function: PWM_RL_BL_1_FKT_BLI am not sure if this has also increased the brake light voltage (as the function keyword suggests) but as it's the brake light, this would not be a bad thing. Changing PWM_SL_V had no affect and I have read this is for the sidemarker LED. I did originally increase the AE voltage across all modes (DRL, parking/sidelight and low beams) by changing four functions: PWM_SL_VIt might be achieved with less than four changes (the last three?) but I did not experiment any further as I only wanted the DRL mode to be increased. Initial voltages (with engine running):
|
Appreciate
0
|
03-28-2020, 04:11 PM | #46 |
New Member
7
Rep 23
Posts |
Hi guys, resurrecting this thread to try increase angel eyes brightness WHEN Headlights/Xenon are ON.
Using Bimmercode I have set angel eyes to max in DRL mode fine. But no affect on the Standing or Parking light when change those corresponding settings. Attached is a screenshot of all the options available under this category, from experience & using Carly + Bimmercode I am pretty sure a group of settings need changing together to make any noticeable overall change. Any help/advice much appreciated. Attachment 2270120 Last edited by Ladooo; 04-01-2020 at 11:58 AM.. |
Appreciate
0
|
04-01-2020, 11:23 AM | #48 |
New Member
7
Rep 23
Posts |
For the FRM3_E89 So far I have figured out how to adjust front & rear DRL brightness, but if someone could help with the highlighted ?? ?? please
DRL FRONT(Angel Eyes): PWM_SL_1_FKT_BL_TFL = 0D 1A(Very High) PARKING LIGHT FRONT: PWM_SL_1_FKT_SL_TFL= ?? ?? STANDING LIGHT FRONT: PWM_SL_1_FKT_PARKL = ?? ?? ?? ?? PWM_BL_FKT_SL = ?? ?? Doing some research from various other posts I have tried a wide range of values in different combinations & did manage to get the Angel Eyes Bright With Headlights/Xenons ON! BUT...there was a error as they were on Permenantly with ignition & so had to code back to default. So seems there is a way to do it but just need to figure out the correct settings. Last edited by Ladooo; 04-01-2020 at 11:56 AM.. |
Appreciate
0
|
12-29-2020, 06:35 AM | #51 |
New Member
0
Rep 17
Posts |
|
Appreciate
0
|
06-08-2021, 06:51 AM | #52 | |
Enlisted Member
3
Rep 34
Posts |
Quote:
|
|
Appreciate
0
|
07-08-2021, 01:36 PM | #53 | |||
New Member
7
Rep 23
Posts |
Quote:
Thanks for confirming. Quote:
Quote:
|
|||
Appreciate
0
|
10-17-2021, 04:10 PM | #54 |
M.
0
Rep 2
Posts |
on my car I have halogen headlight, I would like to code and increase light of angel eyes and also to get welcome pathway, to all do you think that it's possible to do it on halogen headlight ?
|
Appreciate
0
|
12-30-2021, 09:18 AM | #55 | ||||
Enlisted Member
3
Rep 34
Posts |
Quote:
|
||||
Appreciate
0
|
07-21-2022, 09:55 AM | #57 |
Registered
0
Rep 1
Posts |
Need some help here.
I've got one E91 LCI with halogen headlights, FRM3. Replace angel eyes bulb with led ones, 30W. I've tried all options in here, but angel eyes brightness stay the same, to weak. As DRL, parking or standing lights. Any ideias? Thnaks |
Appreciate
0
|
07-21-2022, 10:58 AM | #58 |
Private
11
Rep 51
Posts |
There are YouTube videos of people changing the voltage with Bimmergeeks ProTool.
|
Appreciate
0
|
07-21-2022, 12:50 PM | #59 |
Second Lieutenant
196
Rep 291
Posts |
LEDs wont change brightness regardless of Voltage changes I believe.. They use a driver within which regulates the voltage the LED sees. This is why whatever you change the Voltage to via coding, they stay the same.
At least his is what I have been lead to believe. Im in the same boat, no change I coded made any noticible improvement in Angel eye brightness in my LCI Halogens with LED bulbs in them. |
Appreciate
1
hi rpm10.50 |
Bookmarks |
|
|