[RealJ22]

Originally Posted by mweisdorfer

How LONG did it take you to stitch the new cover on by hand?

Good idea by taking the steering wheel out of the car

I just did it one section at a time. A little over an hour or so.

I bought this wheel from someone on FB. I wanted the updated paddles, but those were $160 alone. Found this entire wheel in MINT condition for $80. Already had the wrap sitting for my other Push/pull wheel. I will be wrapping that one now and selling it.

[213e90n51]

Drive on the 110 fwy to use up old gas since its empty because of corona virus.

[ny325]

My E90 is in " Stay at home mode."

[unrulyteach]

Installed catch can on my n55, fixed shifter wires that were broken and detailed it

[neilvan]

Swapped the headliner to Anthracite on my fathers 07. We were lucky that we were able to pick up all the parts cheaply from a wrecked one and it does make a big difference. He wasnt sure about it until he drove my M-sport and was sold.

20200321_184743

[Serf27]

Day 2 of quarantine: I cleaned out the cabin temp sensor. I was also able to really clean the temp screen since the cover was off.

[4 Doors]

Broke the MAP sensor for the charge pipe. Realized nothing local was opened and ordered a new one on FCP. Hoping deliveries are still happening this week!

[Boosted12a]

I removed the hoses on my compressor bypass valves. Got some small filters with 1" openings to put on the aftermarket cbv and plugged off the nipples on the intake tubes. I figure I'll do it now in prep for some relocated inlets. Planning on trying the new ARM inlets.

[SJM67]

reset my brake service interval after having Powersport brake kit installed....BIG difference in stopping power with these ceramic pads...

[Afanz]

Went to start the car and was welcomed by the warm glow of the SES light

[nighthawk335]

Got around to installing my VRSF 7.5" intercooler, charge pipe, IND painted side reflectors, and smoked side markers. The fitment on the VRSF stuff was garbage, but I made it work. The side markers, and painted side reflectors go a long way for looks IMO I plan on getting rid of the amber bulbs in the side markers as well. The LED replacement bulbs didn't fit, so stealth bulbs it is for those.

Please ignore my filthy bay. I haven't had time to detail it since the weather is just getting better in Chicago.

[nighthawk335]

I couldn't fit all the photos on the last post, but I also installed a yellow start/stop button from IND, their "Limited Edition" trim ring, and I enabled the rear fog lights

[ny325]

Took it out for a essential run. Had to do some banking. Came back, and put it in quarantine.

[E93_Savage]

Walbro 450 Upgrade didnt take many pictures just did it.

[Serf27]

Originally Posted by dailydrivens30

Walbro 450 Upgrade didnt take many pictures just did it.

How long did this take?
I’ve had the 450 for months and haven’t installed it.

[213e90n51]

Originally Posted by nighthawk335

I couldn't fit all the photos on the last post, but I also installed a yellow start/stop button from IND, their "Limited Edition" trim ring, and I enabled the rear fog lights

Ohhh shtttt i gotta get one of those rings! The lci model has the black chippings and how much were these where can i aqquire them?

[E93_Savage]

Originally Posted by Serf27

How long did this take?
I’ve had the 450 for months and haven’t installed it.

I did it in two days and broke my seat(pull up sharply ON BOTH SIDES AT THE SAME TIME) I also have a devil child that requires a lot of my time.

If you have everything laid out mabey 3-4 hours just take your time and pray you dont struggle with the fuel lines like I did.

[mweisdorfer]

Replaced the handle on the passenger's, front side with an aftermarket. It peeled. It's been that way forever, but I saw where you can drill out the handle with a 3/8" drill bit and install the new one using screws on the back end. That's always been my hang up was drilling the old one out but how to secure the new one!?

So, it took maybe 45 min to install and put it all back together. The handle is secure and has no play in it what-so-ever. I was able to use my OEM top cover. So, all I was out was $20.00! 😃


Right Inner Door Panel Handle Pull Trim Cover For BMW E90 3-Series Sedan Replace Part Number: 51417230850, 51-41-7-230-850 https://www.amazon.com/dp/B0761PLK43..._GJGEEbKBKQ2F6

[mweisdorfer]

Originally Posted by nighthawk335

I couldn't fit all the photos on the last post, but I also installed a yellow start/stop button from IND, their "Limited Edition" trim ring, and I enabled the rear fog lights

Wow. Hex trim. That's pretty rare on a 335. You are lucky! The trim ring is what is standard on a pre-LCI though.

[nighthawk335]

Originally Posted by 213e90n51

Ohhh shtttt i gotta get one of those rings! The lci model has the black chippings and how much were these where can i aqquire them?

Here's the link for them! https://ind-distribution.com/collect...rt-stop-button

[S65Hunter]

Originally Posted by nighthawk335

Here's the link for them! https://ind-distribution.com/collect...rt-stop-button

Am I missing something? $127 for a start/stop button?

[nighthawk335]

Originally Posted by mweisdorfer

Wow. Hex trim. That's pretty rare on a 335. You are lucky! The trim ring is what is standard on a pre-LCI though.

It's one of my favorite options I have! Also, I didn't realize that until you mentioned it. Looking back at photos of my old E90 330i, I saw it also had the aluminum ring. Definitely a nice touch for the LCI models I think