|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
For Help with NCSExpert Errors
|
|
04-20-2014, 05:59 AM | #156 |
Private First Class
27
Rep 180
Posts |
NCSExpert Error - Battery Coding to Braille 31AH
Hi All,
I have recently replaced the oem battery with braille 21lbs - 31AH. I have tried to code the battery as per the link below: " google - bmw coding forum Help creating this DIY for battery replacement and registration " During step 7 of section B under procedure B (code changes to car after doing changes to CAS and NFRM modules), I get the following error message: and the error log is as follows: My setup version is as follows: Car: BMW 335i 2008 N54 with Alpina Flash INPA Version 5.0.2 Ediabas Version 6.4.7 NCS Expert 3.1.0 SP-DATEN-E89-V48.1-LITE on Windows XP Mode via Windows 7 64 Bit Will appreciate if you could help me to clarify the above error log. Thanks, Alex Last edited by ABE92; 04-20-2014 at 06:08 AM.. |
Appreciate
0
|
04-29-2014, 08:24 PM | #157 |
New Member
2
Rep 16
Posts |
I just tried to code my '07 E92 for the digital speedometer and I go the following errors.
[20:55:45.106] [2014-04-29] [SERIE] 2020 PABD/CABD A_GBFA.IPS Ident 543 [20:55:45.106] [2014-04-29] [SERIE] SG antwortet nicht : ERROR_ECU_GENERAL_REJECT [20:55:45.218] [2014-04-29] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6 [20:55:45.218] [2014-04-29] [SERIE] SG antwortet nicht CODIERINDEX_LESEN [20:55:46.575] [2014-04-29] [SERIE] 2020 PABD/CABD A_GBBF.IPS Ident 543 [20:55:46.575] [2014-04-29] [SERIE] SG antwortet nicht : ERROR_ECU_GENERAL_REJECT [20:55:46.687] [2014-04-29] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6 [20:55:46.687] [2014-04-29] [SERIE] SG antwortet nicht CODIERINDEX_LESEN ================================================== ==============================(2) [20:58:09.312] [2014-04-29] [SERIE] 4440 Trace CBD_PROC.C GetCbdFile 9 [20:58:09.312] [2014-04-29] [SERIE] Paramaterschlüsselwort ungültig 003020'01,EAM_TIMEDELAY (1598d, 63Eh) [20:58:09.314] [2014-04-29] [SERIE] 1043 Error CDH.C CDHGetNettoDataFromCbd 1 [20:58:09.314] [2014-04-29] [SERIE] Fehler bei CBD-Dateiverarbeitung MRS5.C08 [20:58:09.425] [2014-04-29] [SERIE] 1043 Error COAPI2.CPP coapiRunCabd 6 [20:58:09.425] [2014-04-29] [SERIE] Fehler bei CBD-Dateiverarbeitung SG_CODIEREN A error box popped up saying the following; "Error in CABD! Look at CABI.ERR and Error.LOG! COAPI-1043: Fehler bei CBD-Dateiverarbeitung MRs5.C08 COAPI-1043: Fehler bei CBD-Dateiverarbeitung SG_CODIEREN NCS-Expert 4.0.1, and Daten 50.2 files At this point all I want to know is that nothing's messed up and I think I'll call it quits with coding. I can't handle the stress of messing something up. I also don't know why it's still in German, I followed the windows 7 install to the T. Any help would be greatly appreciated. Last edited by Famous87; 04-29-2014 at 09:40 PM.. |
Appreciate
0
|
05-28-2014, 06:45 AM | #158 | |
New Member
1
Rep 5
Posts |
Quote:
Any luck so far? you might want to try update your daten files to se if any thing changes.. Im also stuck coding anything but my cas unit now. I did update my cars firmware today, might have something to do with that, as i was able to code fine before. Last edited by ezzter; 05-28-2014 at 06:46 AM.. Reason: spelling |
|
Appreciate
0
|
07-26-2014, 12:56 AM | #160 |
Private First Class
20
Rep 177
Posts
Drives: 2011 335i E90 LCI
Join Date: May 2011
Location: Austin TX
|
Just got my car back from service, seems like they reverted my coding back and possibly updated my computer (new navigation warning message looks different).
Tried to go back in to code; Loaded Profile, Hit F1, Hit F3, and ended up with: [00:40:20.042] [2014-07-26] [SERIE] 4514 Trace AT_PROC.C isAuftragValid 1 [00:40:20.042] [2014-07-26] [SERIE] Job invalid Mark Not Valid: +KCBS [00:40:20.052] [2014-07-26] [SERIE] 1180 Error COAPI4.CPP coapiSetAuftrag 3 [00:40:20.052] [2014-07-26] [SERIE] vehicle job is invalid [00:40:20.810] [2014-07-26] [SERIE] 1180 Error COAPI2.CPP coapiRunCabd 6 [00:40:20.810] [2014-07-26] [SERIE] vehicle job is invalid FA_READ [00:40:20.812] [2014-07-26] [SERIE] 1180 Error COAPI4.CPP coapiReadAuftrag 4 [00:40:20.812] [2014-07-26] [SERIE] vehicle job is invalid FA_READ: A_PL2FRX [00:40:21.545] [2014-07-26] [SERIE] 1180 Error COAPI2.CPP coapiRunCabd 6 [00:40:21.545] [2014-07-26] [SERIE] vehicle job is invalid FA_READ [00:40:21.547] [2014-07-26] [SERIE] 1180 Error COAPI4.CPP coapiReadAuftrag 4 [00:40:21.547] [2014-07-26] [SERIE] vehicle job is invalid FA_READ: A_E65CAS [00:40:21.549] [2014-07-26] [SERIE] 1000 Warning COAPI.CPP coapiReadFgNr 9 [00:40:21.549] [2014-07-26] [SERIE] Error CAS ================================================== ==============================(2) [00:40:22.392] [2014-07-26] [SERIE] 4514 Trace AT_PROC.C isAuftragValid 1 [00:40:22.392] [2014-07-26] [SERIE] Job invalid Mark Not Valid: +KCBS [00:40:22.395] [2014-07-26] [SERIE] 1180 Error COAPI4.CPP coapiSetAuftrag 3 [00:40:22.395] [2014-07-26] [SERIE] vehicle job is invalid Using NCSExpert 4.0.1 w/ DATEN 48.1 Any hints? |
Appreciate
0
|
07-26-2014, 10:40 PM | #162 |
Private First Class
20
Rep 177
Posts
Drives: 2011 335i E90 LCI
Join Date: May 2011
Location: Austin TX
|
|
Appreciate
0
|
08-09-2014, 02:02 AM | #163 |
Enlisted Member
3
Rep 39
Posts |
Guys I have the same problem. I need to remove $524. I did it successfully for CAS. But, when I change ECU to FRM, I'm getting this error:
Error in CABD! Look at CABI.ERR and ERROR.LOG! COAPI-2000: Fehler in EDIABAS oder in SG-Beschreibungsdatei SYS-0005: SG-Beschreibungsdatei nicht gefunded FRM_87 COAPI-2000: Fehler in EDIABAS oder in SG-Beshcreibungsdatei SG_CODIEREN Please help me I've been stuck for 5 days now... Im using SP Daten 50.2 and Standard_Tools_12.2
__________________
|
Appreciate
0
|
10-04-2014, 10:33 AM | #165 |
Lieutenant General ***
63
Rep 758
Posts |
I have a buddy who had the Alpina tranny flash and his paddles didn't work. I went thru the steps to fix the paddles but I get and error.
(I did now update my E89 files to the latest 53.3. Do you think that was my issue?) Here's the error log: [11:54:07.644] [2014-10-03] [SERIE] 2021 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1 [11:54:07.644] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert IFH-0010: Datenuebertragung Interface/Steuergeraet gestoert FRM_87 [11:54:07.752] [2014-10-03] [SERIE] 2021 Error COAPI2.CPP coapiRunCabd 6 [11:54:07.752] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ [11:54:07.753] [2014-10-03] [SERIE] 2021 Error COAPI4.CPP coapiReadAuftrag 4 [11:54:07.753] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ: A_PL2FRX [11:54:08.123] [2014-10-03] [SERIE] 2021 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1 [11:54:08.123] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert IFH-0010: Datenuebertragung Interface/Steuergeraet gestoert FRM_87 [11:54:08.232] [2014-10-03] [SERIE] 2021 Error COAPI2.CPP coapiRunCabd 6 [11:54:08.232] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ [11:54:08.233] [2014-10-03] [SERIE] 2021 Error COAPI4.CPP coapiReadAuftrag 4 [11:54:08.233] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ: A_PL2FRX [11:54:08.983] [2014-10-03] [SERIE] 2021 Error COAPI2.CPP coapiRunCabd 6 [11:54:08.983] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ [11:54:08.984] [2014-10-03] [SERIE] 2021 Error COAPI4.CPP coapiReadAuftrag 4 [11:54:08.984] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert FA_READ: A_E65CAS [11:54:08.985] [2014-10-03] [SERIE] 1000 Warning COAPI.CPP coapiReadFgNr 9 [11:54:08.985] [2014-10-03] [SERIE] Fehler CAS ================================================== ==============================(2) [11:54:31.608] [2014-10-03] [SERIE] 2021 Error LFCDHDIA.CPP (A_GKE11.IPS/IPO) CDHapiResultText 1 [11:54:31.608] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert IFH-0010: Datenuebertragung Interface/Steuergeraet gestoert GS19D [11:54:31.715] [2014-10-03] [SERIE] 2021 Error COAPI2.CPP coapiRunCabd 6 [11:54:31.715] [2014-10-03] [SERIE] Datenuebertragung zum SG gestoert SG_CODIEREN ================================================== ==============================(9) |
Appreciate
0
|
12-10-2014, 04:34 PM | #166 |
Major General
824
Rep 5,530
Posts |
Is this thread still active ?
Here are the errors I am getting: [13:26:16.488] [2014-12-10] [SERIE] 2000 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1 [13:26:16.488] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei BIP-0001: Zu langer Job-Parameter oder String-Register-Zugriff FRM_87 [13:26:16.591] [2014-12-10] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6 [13:26:16.591] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ [13:26:16.592] [2014-12-10] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4 [13:26:16.592] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_PL2FRX [13:26:17.089] [2014-12-10] [SERIE] 2000 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1 [13:26:17.089] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei BIP-0001: Zu langer Job-Parameter oder String-Register-Zugriff FRM_87 [13:26:17.193] [2014-12-10] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6 [13:26:17.193] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ [13:26:17.193] [2014-12-10] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4 [13:26:17.193] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_PL2FRX [13:26:17.813] [2014-12-10] [SERIE] 2000 Error LFCDHDIA.CPP (A_E65CAS.IPS/IPO) CDHapiResultText 1 [13:26:17.813] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei BIP-0001: Zu langer Job-Parameter oder String-Register-Zugriff CAS [13:26:17.917] [2014-12-10] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6 [13:26:17.917] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ [13:26:17.917] [2014-12-10] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4 [13:26:17.917] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_E65CAS [13:26:17.918] [2014-12-10] [SERIE] 1000 Warning COAPI.CPP coapiReadFgNr 9 [13:26:17.918] [2014-12-10] [SERIE] Fehler NFRM ================================================== ==============================(2) [13:26:18.552] [2014-12-10] [SERIE] 2000 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1 [13:26:18.552] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei BIP-0001: Zu langer Job-Parameter oder String-Register-Zugriff FRM_87 [13:26:18.657] [2014-12-10] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6 [13:26:18.657] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ [13:26:18.657] [2014-12-10] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4 [13:26:18.657] [2014-12-10] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_PL2FRX |
Appreciate
0
|
12-25-2014, 05:25 PM | #168 |
Colonel
164
Rep 2,399
Posts |
|
Appreciate
0
|
02-09-2015, 09:57 PM | #169 |
Captain
87
Rep 985
Posts
Drives: 08 M5 Sapphire Black
Join Date: Oct 2005
Location: CT
|
Car is an 08 M5. CIC Retrofir from 2010 535i. Error below.
Trying different things to write defaults to the CIC. VO Order was changed with no issues. Tried DATEN 50.2 and 54. This is an E60.
[22:39:34.982] [2015-02-09] [SERIE] 2020 Error LFCDHDIA.CPP (A_CIC.IPS/IPO) CDHapiResultText 1 [22:39:34.982] [2015-02-09] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht CICR [22:39:35.084] [2015-02-09] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6 [22:39:35.084] [2015-02-09] [SERIE] SG antwortet nicht SG_CODIEREN ================================================== ============================== [22:40:09.934] [2015-02-09] [SERIE] 2020 Error LFCDHDIA.CPP (A_CIC.IPS/IPO) CDHapiResultText 1 [22:40:09.934] [2015-02-09] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht CICR [22:40:10.036] [2015-02-09] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6 [22:40:10.036] [2015-02-09] [SERIE] SG antwortet nicht CODIERINDEX_LESEN ================================================== ==============================(2) [22:41:55.345] [2015-02-09] [SERIE] 2020 Error LFCDHDIA.CPP (A_CIC.IPS/IPO) CDHapiResultText 1 [22:41:55.345] [2015-02-09] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht CICR [22:41:55.447] [2015-02-09] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6 [22:41:55.447] [2015-02-09] [SERIE] SG antwortet nicht AIF_LESEN |
Appreciate
0
|
02-10-2015, 10:10 AM | #171 | |
Captain
87
Rep 985
Posts
Drives: 08 M5 Sapphire Black
Join Date: Oct 2005
Location: CT
|
Thank you, I found the translation. Need help to fix though.
Quote:
IFH-0009: ECU isn’t connected or doesn’t respond Now, I can code VO and read FSW PSW files using ncs. It's just the CIC I can't read/write. What would be the culprit? I do have a CIC Emulator/Filter on the CAN lines to enable the navigation. I have seen conflicting information about removing it in order to perform the coding. What do you think? I have also been able to read the CIC Vin with SWID Reader but I did get an IFH-0009 from it when I tried to get the 1B file. Last edited by undecided; 02-10-2015 at 10:18 AM.. |
|
Appreciate
0
|
02-14-2015, 02:28 PM | #172 |
Captain
87
Rep 985
Posts
Drives: 08 M5 Sapphire Black
Join Date: Oct 2005
Location: CT
|
Coding worked fine once I disconnected the emulator.
Thx. everyone
|
Appreciate
0
|
03-13-2015, 10:03 PM | #173 |
Colonel
213
Rep 2,210
Posts |
[19:58:50.940] [2015-03-13] [SERIE] 2020 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiResultText 1
[19:58:50.940] [2015-03-13] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht FRM_70 [19:58:51.086] [2015-03-13] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6 [19:58:51.086] [2015-03-13] [SERIE] SG antwortet nicht CODIERDATEN_LESEN I'm getting those errors trying to read the nfrm after it has already been read and written. Can't seem to read it anymore. Any thoughts? |
Appreciate
0
|
05-01-2015, 12:30 AM | #174 |
Private First Class
6
Rep 180
Posts
Drives: BMW E90 M3 ZCP
Join Date: Mar 2012
Location: Sweden
|
I have not coded my car more than a year and have a new install of INPA, Ediabas and NCS on a Windows 7 32bit install. INPA works just fine but when I open CAS (or NFRM) module in NCS I get the attached error. Not able to find any good info on what this is? Is it the wrong build date in FA/VO?
Can I continue coding allthough I get this error?
__________________
E90 M3 ZCP 2010
E92 335i 2007 black edition |
Appreciate
0
|
05-01-2015, 01:31 AM | #175 | |
Banned
529
Rep 1,527
Posts |
Quote:
|
|
Appreciate
0
|
05-01-2015, 01:54 AM | #176 | |
Private First Class
6
Rep 180
Posts
Drives: BMW E90 M3 ZCP
Join Date: Mar 2012
Location: Sweden
|
Quote:
Ok, I just follow the steps for VO change to edit this? I need to code out the seat airbags as I get all kinds of warnings since I changed to racing seats.
__________________
E90 M3 ZCP 2010
E92 335i 2007 black edition |
|
Appreciate
0
|
Bookmarks |
|
|