Aussies thoughts on the MHD Flasher.

harms · 12-22-2015, 10:40 PM

Quote:

Originally Posted by blk335msport

Nice - any reason why you didn't get a custom pump map?

Have you run your car down the 1/4 yet or dynod it, it would interesting to see how fast / powerful stage 2 OTS is. I did see a yank dyno, and it looked quite conservative ~365whp.

I can't recall if it guy ran some e85 with it (think their petrol contains e85 in any case to get them to 93)

The only reason I'm on the OTS pump flash is because i've been battling a fuel trim problem for months which has been oscillating STFT's, making the AFR's go normal to rich and so on. So its been using heaps of fuel, and i couldn't stand the fuel consumption on the E60 flash while i work out what is wrong with this car.

I have recently installed inlets, so i might get a custom pump flash now. I've actually been enjoying not having to go out of my way to get e85, with the trade off of less power. It's plenty fast still.

In many parts of US it is regulated to have 10% ethanol to reduce the countries demand on oil, so yes that often helps the octane rating.

MJ80. · 12-23-2015, 03:45 AM

Wedge is claiming his shop car is making 400whp with the new V6 OTS map with a 100% stock car... wtf is this wizardry.

Socket · 12-23-2015, 04:13 AM

Quote:

Originally Posted by MJ80.

Wedge is claiming his shop car is making 400whp with the new V6 OTS map with a 100% stock car... wtf is this wizardry.

How do you update the maps MJ. im still on V4

harms · 12-23-2015, 04:53 AM

Quote:

Originally Posted by Socket

How do you update the maps MJ. im still on V4

Close your eyes. Click your heels together, three times. And say "there's no flash like v6", and then magic happens.

Socket · 12-23-2015, 05:00 AM

Quote:

Originally Posted by harms

Close your eyes. Click your heels together, three times. And say "there's no flash like v6", and then magic happens.

i tried it but it didnt work

EB89 · 12-23-2015, 05:00 AM

Quote:

Originally Posted by MJ80.

Wedge is claiming his shop car is making 400whp with the new V6 OTS map with a 100% stock car... wtf is this wizardry.

That's 298kw, I though that was pretty standard for an FBO car with no turbo upgrade.

harms · 12-23-2015, 05:02 AM

Quote:

Originally Posted by Socket

i tried it but it didnt work

Oh i forgot a step... Plug your phone in and click flash built in map. Wait 2 mins, then click your heals 3 times!

harms · 12-23-2015, 05:04 AM

Quote:

Originally Posted by EB89

That's 298kw, I though that was pretty standard for an FBO car with no turbo upgrade.

True, but this is with stock DP's and everything.

But we all know US dyno figures are a little more optimistic than Oz dynos...

EB89 · 12-23-2015, 05:13 AM

Quote:

Originally Posted by harms

True, but this is with stock DP's and everything.

But we all know US dyno figures are a little more optimistic than Oz dynos...

Oh I missed that part, wow that's impressive!!

Socket · 12-23-2015, 05:22 AM

Quote:

Originally Posted by harms

Oh i forgot a step... Plug your phone in and click flash built in map. Wait 2 mins, then click your heals 3 times!

lol

harms · 12-23-2015, 03:06 PM

Quote:

Originally Posted by EB89

Oh I missed that part, wow that's impressive!!

A bit more on this page
http://www.e90post.com/forums/showth...96247&page=138

EB89 · 12-23-2015, 06:57 PM

Quote:

Originally Posted by harms

A bit more on this page
http://www.e90post.com/forums/showth...96247&page=138

Thanks they got the 400whp from virtualdyno, not sure how it compares to real world.

MJ80. · 12-23-2015, 08:10 PM

Pretty bloody accurate, especially for the tuners, they know exactly what they are doing.

T1M · 12-24-2015, 06:11 AM

400whp in dynojet mode (1.09 correction factor). No one uses dynojets here in Oz. So convert hp to kw then take 9% off it to get kw, then factor up or down depending on how happy your local dyno is. Still that's very good power for a stock car, especially also considering no temp/pressure scaling.

7smurfs · 01-14-2016, 10:53 PM

Has the v6 been released? I am seriously considering going to MHD from jb4 (stack)

Pretty sick of having issues/inconsistencies with jb4 every time i switch to map 5

harms · 01-14-2016, 11:34 PM

Quote:

Originally Posted by 7smurfs

Has the v6 been released? I am seriously considering going to MHD from jb4 (stack)

Pretty sick of having issues/inconsistencies with jb4 every time i switch to map 5

Not yet. But current version is pretty good.

I agree with you map 5 is inconsistent and jb4 had a lot of mucking about for me. I'm happy with flash only now.

T1M · 01-20-2016, 06:13 AM

Quote:

Originally Posted by 7smurfs

Has the v6 been released? I am seriously considering going to MHD from jb4 (stack)

Pretty sick of having issues/inconsistencies with jb4 every time i switch to map 5

Nope still being beta tested (I'm one of them). It does not get along with my car, throttle closures galore and the boost/AFR was not controlled as I'd like, but in talking with Wedge 1M's behave differently to 135/335's and basically need their own tunes. I haven't seen any 135/335 v6 data myself.

With a custom tune done for my car, it's making between 391-400whp in VD, and 450lbft, uncorrected at about 25-26*c ambient temps. Translates to approx. 266wkw/559nm which isn't bad given the car is totally stock. I think his 335 test car might be a bit of a freak, have to see what folks cars put down when they're tuned.

Flex68 · 01-27-2016, 08:49 AM

Can anyone confirm if this will work on late model 06 e92 n54 ?

Fuji · 01-27-2016, 02:24 PM

Quote:

Originally Posted by Flex68

Can anyone confirm if this will work on late model 06 e92 n54 ?

Yes it works

Flex68 · 01-27-2016, 02:29 PM

Quote:

Originally Posted by Fuji

Yes it works

Legit ???? Sweeetttttt!!!

Fuji · 01-27-2016, 02:32 PM

Quote:

Originally Posted by Flex68

Quote:

Originally Posted by Fuji

Yes it works

Legit ???? Sweeetttttt!!!

Confirmed works on mine 9/06

Flex68 · 01-27-2016, 08:18 PM

Quote:

Originally Posted by Fuji

Confirmed works on mine 9/06

What cable did you get ???

12-23-2015, 03:45 AM	#156
MJ80. Major 204 Rep 1,103 Posts Drives: E92 335i DCT Individual Join Date: Oct 2013 Location: Gold Coast, Australia. iTrader: (0)	Wedge is claiming his shop car is making 400whp with the new V6 OTS map with a 100% stock car... wtf is this wizardry.
	Appreciate 0 Quote

12-23-2015, 08:10 PM	#167
MJ80. Major 204 Rep 1,103 Posts Drives: E92 335i DCT Individual Join Date: Oct 2013 Location: Gold Coast, Australia. iTrader: (0)	Pretty bloody accurate, especially for the tuners, they know exactly what they are doing.
	Appreciate 0 Quote

12-24-2015, 06:11 AM	#168
T1M Captain 196 Rep 657 Posts Drives: AW MY12 1M Join Date: Jun 2015 Location: Melbourne, Australia iTrader: (0)	400whp in dynojet mode (1.09 correction factor). No one uses dynojets here in Oz. So convert hp to kw then take 9% off it to get kw, then factor up or down depending on how happy your local dyno is. Still that's very good power for a stock car, especially also considering no temp/pressure scaling.
	Appreciate 0 Quote

01-14-2016, 10:53 PM	#169
7smurfs Captain 139 Rep 902 Posts Drives: M3 CS Join Date: Apr 2014 Location: Melbourne iTrader: (0)	Has the v6 been released? I am seriously considering going to MHD from jb4 (stack) Pretty sick of having issues/inconsistencies with jb4 every time i switch to map 5
	Appreciate 0 Quote

01-27-2016, 08:49 AM	#172
Flex68 Captain 75 Rep 853 Posts Drives: E92 335i Join Date: Mar 2015 Location: Australia iTrader: (0)	Can anyone confirm if this will work on late model 06 e92 n54 ?
	Appreciate 0 Quote