[DESI4life10]

aw128i...

Have you tried enabling the alarm chirp through the bs stalk menu.

You can specify that when you lock the car, you want both the lights and horn to sound as confirmation.

You may have to select it again

[Neutrino45]

Originally Posted by sd23

access again please Neuro

Hey, I just returned your access. Please PM me again if it doesn't work.

[Jason]

Please keep all discussions on-topic and technical in nature. There's no tolerance here for drama. Thank you.

[BPMSport]

Originally Posted by BrynDN

Coded this new addition. Drove for a second and seemed cool. Didn't see it telling me to downshift, but...

Coding KOMBI reset my time, date, trip odometer, and all MPG/MPH averages. Had me freaking for a second, but a service meters remained unchanged.

Yeah I remember it scaring me at the beginning also... I actually waited until right after my third service before I took off the door gong, and added digital mpg, etc.. incase it erased the service intervals. I was 1000 miles away from it and would have been screwed out of a major service if it reset. Thank god it doesn't.

It does tell you to downshift, although it's pretty rare. Most of the time it's if you're on the gas and there isn't much acceleration because you are in too high of a gear.

[sd23]

No welcome angel lights for me in my FRM module i drive a 06 with prod date of 06/05 anyone else missing it. I know i don't have the NFRM with AE DRL

[ERIK430i]

Originally Posted by DESI4life10

aw128i...

Have you tried enabling the alarm chirp through the bs stalk menu.

You can specify that when you lock the car, you want both the lights and horn to sound as confirmation.

You may have to select it again

Thanks for your help. I ended up updating all the modules after adding +K302 to CAS and NFRM. I then checked the stalk menu and enabled both lights and horn. My panic alarm now works.

[DESI4life10]

Originally Posted by ERIK335i

Thanks for your help. I ended up updating all the modules after adding +K302 to CAS and NFRM. I then checked the stalk menu and enabled both lights and horn. My panic alarm now works.

No problem bud...Glad everything worked out

[mark19uk]

Originally Posted by Mike@Powerchip

What did you try to code that caused this? Do you have your .trc files before/after?

I did back it up yes, the only 2 things i changed in KOMBI were BC_DIGITAL_V and DIGITAL_KVA.

Now i have the annoying "Gear" displayed.

More worried about the red exhaust tho.

I would have thought with all the info we can get to now that it wouldn't be difficult to clear any errors.

m

[mark19uk]

Originally Posted by BrynDN

Coded this new addition. Drove for a second and seemed cool. Didn't see it telling me to downshift, but...

Coding KOMBI reset my time, date, trip odometer, and all MPG/MPH averages. Had me freaking for a second, but a service meters remained unchanged.

Ive had a red exhaust service date changed to 01.2001 after coding KOMBI, all the others were unchaged.

time, date and language and all trip info were reset.

This is on a 09 320i

[BPMSport]

Originally Posted by mark19uk

I did back it up yes, the only 2 things i changed in KOMBI were BC_DIGITAL_V and DIGITAL_KVA.

Now i have the annoying "Gear" displayed.

More worried about the red exhaust tho.

I would have thought with all the info we can get to now that it wouldn't be difficult to clear any errors.

m

When you coded the car did you press process car or did you select CODIERN and program CIC specifically?

Have you tried programming KOMBI with a blank .MAN file?

Make sure you set the date too if its wrong. It shouldn't be reset during programming.

[mark19uk]

i selected CODIERN.
Just popped out and coded a blank .MAN, still got the gear, the cruise control and exhaust errors.
The date never changed, only the time.

this is a weird one!!!

edit:

after driving for 20 mins or so the "particle filter" error has gone, just left with the DCC Failed error.

hmmmm

[DESI4life10]

Originally Posted by mark19uk

i selected CODIERN.
Just popped out and coded a blank .MAN, still got the gear, the cruise control and exhaust errors.
The date never changed, only the time.

this is a weird one!!!

edit:

after driving for 20 mins or so the "particle filter" error has gone, just left with the DCC Failed error.

hmmmm

Yea all the service interval alerts should return back to normal once you drive for a bit.

[el-drifot]

Hey guys
I changed some values in my IHK module.Now my climate looks like this in Auto Mode :

And Manual Mode:


Just change this values like displayed:
GEBLAESE_AUTO_MIT_A
aktiv
GEBLAESE_AUTO_MIT_BALKEN
nicht_aktiv
GEBLAESE_MIT_LUEFTER_SYMB
nicht_aktiv
GEBLAESE_MIT_RAHMEN
nicht_aktiv

Greetz
El-Drifto

::: New found :

Change
LICHT_AUT_WERT_1
aktiv
LICHT_AUT_WERT_2
aktiv
LICHT_AUT_WERT_3
aktiv

In module KOMBI and you can change the sensivity of your automatic light sensor in your Dash! Great when you dont have any Navigation System.

[Kalud]

Originally Posted by el-drifot

Just change this values like displayed:
GEBLAESE_AUTO_MIT_A
aktiv
GEBLAESE_AUTO_MIT_BALKEN
nicht_aktiv
GEBLAESE_MIT_LUEFTER_SYMB
nicht_aktiv
GEBLAESE_MIT_RAHMEN
nicht_aktiv

Nice, while you're at it, do you have "REST_TASTE_VERBAUT" in your IHK module ? If so and if its "aktiv" try it on "nicht_aktiv", you might get the ALL Button function that we have on 2011. I would be very interested to see if it works, but I can't tests it as I have a 2011 and did the opposite with success. Many more people are interested in this also

[el-drifot]

In my IHK Module file, there is no Entry for that. But in my main 226 KB FSW_PSW.TRC file there is the entry. But I dont know how to change that becuase when I load the IHK ECU there is no REST_TASTE_VERBAUT entry... Hmmm

[Pseudo Nim]

Originally Posted by el-drifot

In my IHK Module file, there is no Entry for that. But in my main 226 KB FSW_PSW.TRC file there is the entry. But I dont know how to change that becuase when I load the IHK ECU there is no REST_TASTE_VERBAUT entry... Hmmm

You know, it's an entirely random idea and I don't think I recommend trying it, but I just had a thought - it's been discussed that we shouldn't try adding non-existent values to modules, but WHAT IF you have that value in the full dump but not in the individual module, and you are reasonably certain that that value goes into the said module? (you can actually determine its location by searching the full dump and seeing the values around it - so you can usually figure out from whence it came). THEN maybe you can manually "force" the value into the module, i.e. add it by hand and set it to the value that you want?

I wonder whether that makes sense and whether anyone is adventurous enough to try, or at least offer some counter-opinions.

[Kalud]

Anyone outside US/Canada (because we don't have it here) have Auto Start-Stop enabled on a 3-series: http://www.bmw.com/com/en/newvehicle...startstop.html

If I remember well, 2011.5 M3 have this enabled in the US...

I've seen a lot of switches related to MSA in my N55 car.

From the N55 Training documentation:

MSA
	nicht_aktiv
MSA_ALIVE_MONITOR
	nicht_aktiv
MSA_CSUM_MONITOR
	nicht_aktiv
MSA_ENABLE
	wert_01
MSA_ID_MONITOR
	nicht_aktiv
MSA_SWITCH_ON_OFF_ENABLE
	nicht_aktiv
MSA_NOTSTRATEGIE
	nicht_aktiv
MSA_ANSTEUERLOGIK
	ihxx
TC_MSA_NO_KL15_AUTO_OFF
	nicht_aktiv
MSA_CODIERUNG
	nicht_aktiv
MSA_MEMORY
	nicht_aktiv
MSA_ANZEIGELOGIK
	anzeige_ihkx
MSA_E89
	nicht_verbaut
MSA_MEMORYFUNKTION
	nicht_aktiv
HVAC_MSA_EFFICIENCY
	nicht_aktiv
EDC_LED_SWITCH_MSA
	nicht_aktiv
MSA_DDE
	nicht_aktiv
MSA_KENNLINIENSATZ_US
	nicht_aktiv

[rubdom]

Originally Posted by Pseudo Nim

You know, it's an entirely random idea and I don't think I recommend trying it, but I just had a thought - it's been discussed that we shouldn't try adding non-existent values to modules, but WHAT IF you have that value in the full dump but not in the individual module, and you are reasonably certain that that value goes into the said module? (you can actually determine its location by searching the full dump and seeing the values around it - so you can usually figure out from whence it came). THEN maybe you can manually "force" the value into the module, i.e. add it by hand and set it to the value that you want?

I wonder whether that makes sense and whether anyone is adventurous enough to try, or at least offer some counter-opinions.

Interesting. I would like to add the home lights automatic option to NFRM. Its only in my main file and not in the module.
I don't think I am brave enough to try it.

[spera23]

Originally Posted by rubdom

Interesting. I would like to add the home lights automatic option to NFRM. Its only in my main file and not in the module.
I don't think I am brave enough to try it.

What is the value for the auto home lights?

[soty08]

Hello all.

I'm getting error when DIY step40,"we are going and always select CAS".

FA-Fehler
COAPI-2062:error during reading coding data
CAS,FA_LESEN:ERROR_ECU_INCORRECT_RESPONSE_ID

NCS not read FA.
I need your help.
Thank you.

[rubdom]

Originally Posted by spera23

What is the value for the auto home lights?

HEIMLEUCHTEN_FUNKSCHL

Should make them come on when you lock with remote.

[spera23]

Originally Posted by rubdom

HEIMLEUCHTEN_FUNKSCHL

Should make them come on when you lock with remote.

Yea I dont see it anywhere either, only in my main file as well...