|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Pre-LCI Bi-Xenon w/ Adaptive Harness Pin-out (05-08)
|
|
02-12-2019, 04:48 PM | #1 |
Private First Class
30
Rep 188
Posts
Drives: 2006 330i Pre-LCI Monaco Blue
Join Date: May 2018
Location: Orange County, California
|
Pre-LCI Bi-Xenon w/ Adaptive Harness Pin-out (05-08)
Here is a pin-out for Bi-Xenon Adaptive Headlights for Pre-LCI that I made for reference.
------------Main Harness------------ TS + = Turn Signal Positive TS - = Turn Signal Negative H7 + = Flash to Pass or DRL Positive (Inner Lights) H7 - = Flash to Pass or DRL Negative (Inner Lights) HB + = High Beam Solenoid Positive HB - = High Beam Solenoid Negative HID + = To D1S Ballast Positive HID - = To D1S Ballast Negative AE + = Angel Eye Positive AE - = Angel Eye Negative AHL/SMC Module = 3 Pins in total to connector for SMC Module ------------SMC Harness------------ Yellow = Vertical Stepper Motor Red = Horizontal Stepper Motor (Has 2 Connectors) Blue = Main Harness ---------Bulb Type's--------- Turn Signal Bulb = 7507 or PY21W Flash to Pass or DRL Bulb = H7 Low/High Beam = D1S Angel Eye = ZKW Part # 626.11.200.02 |
Bookmarks |
|
|