PnP Interior LED Light "Kit"

Kev · 04-26-2010, 10:47 PM

New bulb that should work with the map lights:

http://www.ledlight.com/t10-wedge-50...z-can-bus.aspx

aPORO · 04-29-2010, 12:11 PM

since Kev said the passenger footwell lights is different, and shinchan mention one type of bulbs would fit under door and both footwell.......Can someone tell me what to get for the passenger side footwell? Does the foot well or under door bulbs need to be those model that turned 90 degree for lighting down?

Kev · 04-30-2010, 08:06 PM

You can try this in the standard housing:

http://www.ledlight.com/super-flux-c...led-light.aspx

Misturrtinnie · 04-30-2010, 11:06 PM

Could someone cliffnote every bulb I need to replace everything in the interior? I will not be getting the trunk or glove like shinchan, and i would love to order all the bulbs at one site, unless there's no way. And I also would like the passenger side footwell to be LED also. Thank you so much.

And all the cars in this post is amazing looking. Good job everyone.

Kev · 05-02-2010, 01:36 PM

Quote:

Originally Posted by Misturrtinnie

Could someone cliffnote every bulb I need to replace everything in the interior? I will not be getting the trunk or glove like shinchan, and i would love to order all the bulbs at one site, unless there's no way. And I also would like the passenger side footwell to be LED also. Thank you so much.

And all the cars in this post is amazing looking. Good job everyone.

Is this not succinct / clear enough? Let me know and I can fix it.

http://www.e90post.com/forums/showpo...56&postcount=1

Olagüe · 05-21-2010, 07:19 AM

http://www.e90post.com/forums/showthread.php?t=377577

my car ;-)

Robben@ltbmw · 06-03-2010, 03:49 AM

well most T5 bulbs work for the rear passenger footwell lights?

Tzu · 08-10-2010, 11:52 PM

Are these TOO bright? I think the stock is nice the way it is, but wouldn't mind a nice pure light. I mean, are you blinded everytime you open the door?

robb41488 · 09-01-2010, 08:56 PM

i know this is an old post but i figured id bump it since it was the first hit on search....

i ordered my ENTIRE setup from v-leds.com i will be updating this post with pics later on.

i got these new lights for the maps/domes, there canbus read and AMAZINGLY BRIGHT
http://www.v-leds.com/Interior-LED/D...61053-1-2.html

these for the footwells and doors (worked ok except for our wiring being odd compared to other cars)
http://www.v-leds.com/Interior-LED/D...98419-1-2.html

and a set of these for the glove box and trunk
http://www.v-leds.com/Interior-LED/D...00027-1-2.html

BMWM3Rules · 11-12-2010, 10:14 PM

I just got done with converting my 2009 M3 Sedan to LED. I followed Kev's initial post - Thanks Kev for taking the time to post!!!

Just a few minor changes. My 09 M3 sedan has 4 bulbs for the Front footwell lights / Front under the door puddle lights (Instead of 3) - 1 bulb for the door and 1 for the footwell on each side. A total of 4 bulbs for both driver and passenger sides.

Also the light bulb fixture must have changed in the 09's because the Side Firing Super Flux 6 LED Light T10 Wedge (0 degree offset)
http://www.ledlight.com/t10-wedge-si...led-light.aspx does not fit in the light fixture. I ended modifying my fixture by cutting and drilling a little of the fixture away to make the Side Firing LED bulb fit. After doing this I would recommend just using a different bulb that will fit in the fixture. I tried:

6 Ultra Bright S.M.T. L.E.D. T10 Wedge LED Light Bulb
http://www.ledlight.com/SearchResult...KeyWords=78564

Which works and fits in the fixture but is a little recessed and slightly not as bright as the one Kev recommended. But it's plenty bright.

Also the Bavauto domelight LED24 has 2 x 12 LED panels and only one T10 wedge adapter. 1 - 12 LED panel is enough brightness and you can use one in the front dome and one 12 LED in the rear dome...but the kit only has one T10 wedge adapter. I didn't know where to buy just the T10 wedge adapter and had to but another LED24 kit from Bavauto at $19.95 each. So you need 2 LED24 (or 2 x LED12) kits from Bavauto for the dome lights.

I also had to do a little minor clipping to make the trunk LED bulb fit in the light fixture.

Overall, very nice mod for a little more than $100 to have the white light look!
Paul

Side Firing Super Flux 6 LED Light T10 Wedge (0 degree offset) Barely fits in the fixture

04-26-2010, 10:47 PM	#45
Kev Critical Care Anesthesiologist 481 Rep 8,828 Posts Drives: SMB F83 Join Date: Aug 2006 Location: Seattle, WA iTrader: (24) Garage List 2009 Porsche 911 Ca ... [9.50]	New bulb that should work with the map lights: http://www.ledlight.com/t10-wedge-50...z-can-bus.aspx __________________ kev { divinum est sedate dolorem } "your friendly neighborhood critical care anesthesiologist"
	Appreciate 0 Quote

04-29-2010, 12:11 PM	#46
aPORO New Member 0 Rep 5 Posts Drives: 2008 328XI Join Date: Apr 2009 Location: Edmonton, Canada iTrader: (0)	since Kev said the passenger footwell lights is different, and shinchan mention one type of bulbs would fit under door and both footwell.......Can someone tell me what to get for the passenger side footwell? Does the foot well or under door bulbs need to be those model that turned 90 degree for lighting down?
	Appreciate 0 Quote

04-30-2010, 08:06 PM	#47
Kev Critical Care Anesthesiologist 481 Rep 8,828 Posts Drives: SMB F83 Join Date: Aug 2006 Location: Seattle, WA iTrader: (24) Garage List 2009 Porsche 911 Ca ... [9.50]	You can try this in the standard housing: http://www.ledlight.com/super-flux-c...led-light.aspx __________________ kev { divinum est sedate dolorem } "your friendly neighborhood critical care anesthesiologist"
	Appreciate 0 Quote

04-30-2010, 11:06 PM	#48
Misturrtinnie Addicted. 43 Rep 1,208 Posts Drives: 2007 335i Coupe AW Join Date: Apr 2010 Location: Dallas, Texas iTrader: (13)	Could someone cliffnote every bulb I need to replace everything in the interior? I will not be getting the trunk or glove like shinchan, and i would love to order all the bulbs at one site, unless there's no way. And I also would like the passenger side footwell to be LED also. Thank you so much. And all the cars in this post is amazing looking. Good job everyone. __________________ #TeamNemesisTX
	Appreciate 0 Quote

05-21-2010, 07:19 AM	#50
Olagüe Brigadier General 106 Rep 4,502 Posts Drives: 333i e92 Join Date: Aug 2007 Location: New York City iTrader: (0)	http://www.e90post.com/forums/showthread.php?t=377577 my car ;-)
	Appreciate 0 Quote

06-03-2010, 03:49 AM	#51
Robben@ltbmw 118 Rep 2,215 Posts Drives: E90 Space Grey Join Date: Dec 2009 Location: ROSEMEAD, CA iTrader: (4) Garage List 2007 328i [0.00]	well most T5 bulbs work for the rear passenger footwell lights?
	Appreciate 0 Quote

08-10-2010, 11:52 PM	#52
Tzu Lieutenant Colonel 29 Rep 1,551 Posts Drives: 335i Join Date: Jun 2010 Location: Toronto iTrader: (1)	Are these TOO bright? I think the stock is nice the way it is, but wouldn't mind a nice pure light. I mean, are you blinded everytime you open the door?
	Appreciate 0 Quote

09-01-2010, 08:56 PM	#53
robb41488 New Member 1 Rep 21 Posts Drives: 335i Join Date: Aug 2010 Location: t*nacle iTrader: (0)	i know this is an old post but i figured id bump it since it was the first hit on search.... i ordered my ENTIRE setup from v-leds.com i will be updating this post with pics later on. i got these new lights for the maps/domes, there canbus read and AMAZINGLY BRIGHT http://www.v-leds.com/Interior-LED/D...61053-1-2.html these for the footwells and doors (worked ok except for our wiring being odd compared to other cars) http://www.v-leds.com/Interior-LED/D...98419-1-2.html and a set of these for the glove box and trunk http://www.v-leds.com/Interior-LED/D...00027-1-2.html
	Appreciate 0 Quote

11-12-2010, 10:14 PM	#54
BMWM3Rules Enlisted Member 5 Rep 33 Posts Drives: Current 2015 M3;Old 09M3, 04M3 Join Date: Feb 2009 Location: Minneapolis, MN iTrader: (1)	I just got done with converting my 2009 M3 Sedan to LED. I followed Kev's initial post - Thanks Kev for taking the time to post!!! Just a few minor changes. My 09 M3 sedan has 4 bulbs for the Front footwell lights / Front under the door puddle lights (Instead of 3) - 1 bulb for the door and 1 for the footwell on each side. A total of 4 bulbs for both driver and passenger sides. Also the light bulb fixture must have changed in the 09's because the Side Firing Super Flux 6 LED Light T10 Wedge (0 degree offset) http://www.ledlight.com/t10-wedge-si...led-light.aspx does not fit in the light fixture. I ended modifying my fixture by cutting and drilling a little of the fixture away to make the Side Firing LED bulb fit. After doing this I would recommend just using a different bulb that will fit in the fixture. I tried: 6 Ultra Bright S.M.T. L.E.D. T10 Wedge LED Light Bulb http://www.ledlight.com/SearchResult...KeyWords=78564 Which works and fits in the fixture but is a little recessed and slightly not as bright as the one Kev recommended. But it's plenty bright. Also the Bavauto domelight LED24 has 2 x 12 LED panels and only one T10 wedge adapter. 1 - 12 LED panel is enough brightness and you can use one in the front dome and one 12 LED in the rear dome...but the kit only has one T10 wedge adapter. I didn't know where to buy just the T10 wedge adapter and had to but another LED24 kit from Bavauto at $19.95 each. So you need 2 LED24 (or 2 x LED12) kits from Bavauto for the dome lights. I also had to do a little minor clipping to make the trunk LED bulb fit in the light fixture. Overall, very nice mod for a little more than $100 to have the white light look! Paul Side Firing Super Flux 6 LED Light T10 Wedge (0 degree offset) Barely fits in the fixture
	Appreciate 0 Quote