[tylerhart_21]

My front right wheel bearing is starting to go out so moving over to the m3 knuckles makes sense. After reading Ali’s post on the e92 m3 and f30/2 front knuckles it is worth the upgrade. To sum up the front knuckles they work the best with m3 control arms to remove the interior wear near the wheel and they give more camber while turning. The f30/2 front knuckles are .5 pounds lighter but the same design as the e9x ones. Let me know if I missed any info and anything I should do while in that area! (I will be replacing the front bearings)

[ornicar]

Can you please share the Ali's post?

[tylerhart_21]

Here’s the part where it starts: Pg.24

https://www.e90post.com/forums/showthread.php?t=1579797