[Edva]

Hello, i am newbie and i want to make on my car e90 2005/09 320d 120kw m47 welcome lights.i searched and saw that not on all versions frm module can be done it. How to check my frm? 1,2 or 3?

[bimmerfan1972]

Do you have anything to connect to the ODBII port? A code scanner, or laptop with BMW Tools? If not, you can look at the casing for the FRM. In my 2011 335 it is on the inside of the footwell next to my left foot. It should have a sticker telling you what type it is. You may have to remove it to see this, I'm not sure which side the sticker will be on.

[Edva]

Originally Posted by bimmerfan1972

Do you have anything to connect to the ODBII port? A code scanner, or laptop with BMW Tools? If not, you can look at the casing for the FRM. In my 2011 335 it is on the inside of the footwell next to my left foot. It should have a sticker telling you what type it is. You may have to remove it to see this, I'm not sure which side the sticker will be on.

Yes i have k+dcan cabel. Inpa and ista/rheingold programs.

[bimmerfan1972]

Go into ISTA-D and have it read for your VIN. You can tell it to read VIN and do Complete Test. Once complete, you can click on Control Unit Tree. You will see your FRM. If I remember correctly, if you hover over the FRM it will tell you what type it is. You will see something like what is in the screenshot. If this doesn't work for you, I will check when I get home for exact instructions.

[ctuna]

Inpa functional jobs I believe its f2 and f3.
See the following link.
Ista is great for diagnostics but I don't know how it id's ecu and
firmware versions.

https://bimmerprofs.com/diagnostics-inpa-part-1/

diagnostic manual ista/inpa
https://bimmerprofs.com/diagnostics-inpa-part-1/
https://www.google.com/url?sa=t&rct=...xo19teM9vkTF-C
https://www.google.com/url?sa=t&rct=...7x8H3pN8h1fMuF
https://www.bimmerforums.com/forum/s...-P-actually-do
https://www.google.com/url?sa=t&rct=...lkXEhlQYy4i9Nb