E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > Bimmer Geeks Pro Tool



Reply
 
Thread Tools Search this Thread
      11-04-2018, 10:49 PM   #23
gerikivan
Private First Class
gerikivan's Avatar
No_Country
54
Rep
105
Posts

Drives: 2008 E92 M3 Coupe, E82 135i
Join Date: Aug 2018
Location: San Diego

iTrader: (0)

can the protool reset frm?
Appreciate 0
      11-05-2018, 01:16 PM   #24
Joe@TopGearSolutions
Major
Joe@TopGearSolutions's Avatar
262
Rep
1,174
Posts

Drives: BMW
Join Date: Mar 2011
Location: USA

iTrader: (3)

Quote:
Originally Posted by its_dewayne View Post
Instead of starting a new thread, I figured Id post in here.

I just got the app and licenses over the weekend and been playing around with it. Has anyone successfully coded out the TPMS and no light on the dash? I unhooked the module behind the rear passenger tire and switched the 3 tpms parameters to not active, and Im still getting the dash light.
Most likely will require the use of NCS Expert since the VO needs to be modified.
Appreciate 0
      11-05-2018, 07:20 PM   #25
its_dewayne
Private
its_dewayne's Avatar
29
Rep
64
Posts

Drives: 2009 328xi
Join Date: Feb 2017
Location: Danville, Ky

iTrader: (0)

It actually ended up being that I unplugged the tpms receiver and not the actual module, that was located behind the battery. Unhooked it, turned the car on and the tpms light was no more.
Appreciate 0
      11-11-2018, 05:36 PM   #26
335e92tx
ahat
335e92tx's Avatar
1032
Rep
2,592
Posts

Drives: Was '07-335e92 - Now '13-335IS
Join Date: Mar 2008
Location: Texas

iTrader: (6)

Well, I just won a master license so Im pretty much
__________________

'13 335IS N54 (1 of 373 LeMans Blue out of 3597 total production e92)- Grey interior (1 of 24 in LMB with any trans- 1 of 14 with DCT)-MODS -MFactory LSD/MHD-BQ custom Tune/ATM-IC/AFE Momentum GT Intake/Konis/Mfront&HeimJoint Rear rods&arms/Brembos.
https://photos.app.goo.gl/Lo6aHZRo7XqtPkhL8
Appreciate 0
      11-13-2018, 11:10 PM   #27
perth1
Private
31
Rep
79
Posts

Drives: E90
Join Date: Aug 2016
Location: Perth, Western Australia

iTrader: (0)

Yesterday I successfully used ProTool for calibrating a 2nd hand DSC module to my E90 M3. I'm pleased with that.

I had to go through the valve calibrations a couple of times before I succeeded. (That may have been some air bubbles in the pump or something else). I had to have the engine running for the app to discover the DSC module. Not sure if that is due to my OBD cable?

Cheers,
Appreciate 0
      11-14-2018, 02:08 PM   #28
HawkeyeGeoff
Captain
HawkeyeGeoff's Avatar
United_States
263
Rep
620
Posts

Drives: E90 335XI MSport, S2000
Join Date: Dec 2016
Location: Waterford, MI

iTrader: (1)

Garage List
Can the ProTool do the Transfer case calibration/fluid life/adaptations needed after you change the fluid?
Appreciate 0
      11-14-2018, 04:51 PM   #29
335e92tx
ahat
335e92tx's Avatar
1032
Rep
2,592
Posts

Drives: Was '07-335e92 - Now '13-335IS
Join Date: Mar 2008
Location: Texas

iTrader: (6)

Quote:
Originally Posted by HawkeyeGeoff View Post
Can the ProTool do the Transfer case calibration/fluid life/adaptations needed after you change the fluid?
I just asked BG on the FB group associated with the Free PT users. I dont have it hooked up now but next time I do Ill go into the gearbox section (but it might not display for me). I imagine it does.
__________________

'13 335IS N54 (1 of 373 LeMans Blue out of 3597 total production e92)- Grey interior (1 of 24 in LMB with any trans- 1 of 14 with DCT)-MODS -MFactory LSD/MHD-BQ custom Tune/ATM-IC/AFE Momentum GT Intake/Konis/Mfront&HeimJoint Rear rods&arms/Brembos.
https://photos.app.goo.gl/Lo6aHZRo7XqtPkhL8
Appreciate 1
      11-14-2018, 08:34 PM   #30
mweisdorfer
Major General
mweisdorfer's Avatar
United_States
1900
Rep
6,968
Posts

Drives: 2007 Black/Black 335i e90
Join Date: Apr 2011
Location: Holly, MI

iTrader: (0)

Garage List
2007 BMW E90 335i  [0.00]
2008 bmw x5  [0.00]
Quote:
Originally Posted by 335e92tx View Post
Well, I just won a master license so Im pretty much
How did you do that ?
Appreciate 0
      11-14-2018, 09:32 PM   #31
335e92tx
ahat
335e92tx's Avatar
1032
Rep
2,592
Posts

Drives: Was '07-335e92 - Now '13-335IS
Join Date: Mar 2008
Location: Texas

iTrader: (6)

Quote:
Originally Posted by mweisdorfer View Post
How did you do that ?
Well, good question. Like monday, at about 5 oclock, they had a first ten responders on this FB group - https://www.facebook.com/groups/1117168251792172/

and I happened to be one of the 10.. (actually they ended up making it 20..)


But, go here.. they got good support and might do another free-bee.

https://www.facebook.com/groups/1117168251792172/
__________________

'13 335IS N54 (1 of 373 LeMans Blue out of 3597 total production e92)- Grey interior (1 of 24 in LMB with any trans- 1 of 14 with DCT)-MODS -MFactory LSD/MHD-BQ custom Tune/ATM-IC/AFE Momentum GT Intake/Konis/Mfront&HeimJoint Rear rods&arms/Brembos.
https://photos.app.goo.gl/Lo6aHZRo7XqtPkhL8
Appreciate 0
      12-02-2018, 12:15 PM   #32
AndreL
Registered
0
Rep
1
Posts

Drives: 2010 BMW 335i
Join Date: Dec 2018
Location: Fort Lauderdale

iTrader: (0)

Quote:
Originally Posted by gamesfrager View Post
Used it to code my folding mirrors retrofit.
Enabled digital speed display, fold mirrors with key fob and set delay to 0s. So no need to hold the lock.

Haven't done any thing crazy beyond that.
I agree, the interface seems like someone's kid got a hold of Photoshop (designer/developer here).
Funny thing, the blue BMW on the splash screen is not even supported by the app.
Can anyone guide me to were is it that I need to look in order to do this. I can't seem to find it nor know how to
Appreciate 0
      12-02-2018, 01:14 PM   #33
gamesfrager
Banned
Canada
197
Rep
709
Posts

Drives: 2011 328i
Join Date: Feb 2018
Location: Calgary

iTrader: (0)

Quote:
Originally Posted by AndreL View Post
Can anyone guide me to were is it that I need to look in order to do this. I can't seem to find it nor know how to
All of it is done in the "Safety" section
The CAS and Footwell module sub-section.

https://www.bimmergeeksprotool.com/diy

From their site:

Coding "How-To's"

Delete TPMS Light:

1. Unplug the RDC module. In pre-LCI models it is located behind the carpet and padding on the right side of the trunk. It is a white box that has RDC labeled on it. On LCI models, it is located in the rear passenger wheel well,


2. Code the 3 parameters containing "TPMS Delete" in the coding section of the instrument cluster to "Not Active".

Folding Mirrors:

1. Set "Comfort Closing via FOB" in the coding section of CAS to "Active".
2. Set "Folding Mirrors via FOB" in the coding section of FRM to "Active".

​(optional) Set the "Comfort Closing Delay" in the coding section of CAS to 0ms to make mirrors fold quicker.

Delete SOS Light: Note, this light appears for many reason, this normally kills the error..



1. Set the 2 parameters containing "TCM Installed" in the coding section of the instrument cluster to "Not Active".

Video In Motion (CIC only):



1. Code the 3 video in motion parameters in the Idrive coding section.

Appreciate 0
      12-05-2018, 11:10 PM   #34
gerikivan
Private First Class
gerikivan's Avatar
No_Country
54
Rep
105
Posts

Drives: 2008 E92 M3 Coupe, E82 135i
Join Date: Aug 2018
Location: San Diego

iTrader: (0)

were you guys able to turn off the amber in the corner of the headlight? not the turn signal
Appreciate 0
      12-06-2018, 10:08 AM   #35
nowires
New Member
0
Rep
5
Posts

Drives: 2011 BMW 335i E92 N55
Join Date: Dec 2018
Location: FL

iTrader: (0)

Thumbs up Pro Tool - Hardware??

Quote:
Originally Posted by gamesfrager View Post
Used it to code my folding mirrors retrofit.
Enabled digital speed display, fold mirrors with key fob and set delay to 0s. So no need to hold the lock.

Haven't done any thing crazy beyond that.
I agree, the interface seems like someone's kid got a hold of Photoshop (designer/developer here).
Funny thing, the blue BMW on the splash screen is not even supported by the app.

My apologies if i missed earlier in the threads, but what Hardware is needed for any Coding/programming/registration? I need to register my new battery replacement - Thanks in advance
Appreciate 0
      12-06-2018, 10:11 AM   #36
hassmaschine
Major General
United_States
3940
Rep
7,216
Posts

Drives: "NBO" 330i
Join Date: Jun 2014
Location: earth

iTrader: (0)

You just need one of their cables (USB or bluetooth) that works with the ProTool software.
Appreciate 0
      12-06-2018, 10:20 AM   #37
apexit4
Major
Poland
1231
Rep
1,101
Posts

Drives: 335D M-Sport, X5D
Join Date: Apr 2018
Location: Maryland

iTrader: (0)

Is it possible to use ProTool to program new options to the VO in the CAS and NFRM modules? Also, is it possible to log torque converter parameters? I havent been able to find definitive answers to these specific questions yet.
Appreciate 0
      12-06-2018, 11:27 AM   #38
perth1
Private
31
Rep
79
Posts

Drives: E90
Join Date: Aug 2016
Location: Perth, Western Australia

iTrader: (0)

Quote:
Originally Posted by Joe@TopGearSolutions View Post
Can be done using NCS Expert. But, it requires editing your specific FRM file, then writing (default coding) that file back to your car. Or, you can use NETTODAT coding.

I prefer not to use NETTODAT, because it changes back to 1 or 3 every time you code the FRM in the future.
Hi again,
I have tried some coding with ProTool over the last month. In a way it is coding for dummies, but it also doesn't seem to give a back-up, and doesn't tell clearly where the changes are made.

I am wondering does ProTool also change the entire trace file in the CAS, or does it only "hack' individual parameters in one selected module only? What will happen if/when NCS is used in the future? Will it overwrite coding done by ProTool?

When I recently replaced my JBBF (trying to make my rear windows work) I used ProTool to make notes (take print screens) of all the coding settings in the old JBBF before I fitted the new one. Then I looked at all the settings just after fitting the second-hand JBBF from an E90 and changing its VIN. ProTool then showed exactly the same coding values for the 'new' JBBF. My 'old' JBBF and 'new' would obviously have had some differences, so it looks like ProTool must be showing the coding values from the main trace file in CAS rather than the actual settings in each module?

Also it looks like ProTool is not listing up all the coding parameters for a module, only some selected ones?
Cheers,
Appreciate 0
      12-06-2018, 07:42 PM   #39
E92Roni
Second Lieutenant
E92Roni's Avatar
157
Rep
255
Posts

Drives: 2015 M4 2012 M3 1999 328IS
Join Date: Nov 2018
Location: Los Angeles, CA

iTrader: (0)

Quote:
Originally Posted by gerikivan View Post
were you guys able to turn off the amber in the corner of the headlight? not the turn signal
I bought it hoping i could code those three stupid LEDs out but i couldn't find the option for it. Either its there and i cant find it because the way its set up is horrendous or it just doesn't exist.
Appreciate 0
      12-06-2018, 10:07 PM   #40
apexit4
Major
Poland
1231
Rep
1,101
Posts

Drives: 335D M-Sport, X5D
Join Date: Apr 2018
Location: Maryland

iTrader: (0)

Quote:
Originally Posted by apexit4 View Post
Is it possible to use ProTool to program new options to the VO in the CAS and NFRM modules? Also, is it possible to log torque converter parameters? I havent been able to find definitive answers to these specific questions yet.
Just got word back from BimmerGeeks. Both options are not available at the moment.
Appreciate 0
      12-06-2018, 10:39 PM   #41
gamesfrager
Banned
Canada
197
Rep
709
Posts

Drives: 2011 328i
Join Date: Feb 2018
Location: Calgary

iTrader: (0)

The app has come a long way in terms of interface, and I do see it being updated every week or so.
Hopefully they turn it into a more powerful tool.

I wish I can change VO, then I can do the CD changer blutooth box setup for streaming music.
Appreciate 0
      12-11-2018, 01:54 AM   #42
SJM67
Enlisted Member
SJM67's Avatar
United_States
24
Rep
48
Posts

Drives: 2008 E92 335I Coupe
Join Date: Dec 2016
Location: 408

iTrader: (0)

Garage List
1995 BMW 318I  [0.00]
2008 BMW 335I  [0.00]
so...has anyone running protool with bluetooth got away with using ANOTHER bluetooth adapter..(elm 327 2.1)??
Appreciate 0
      12-11-2018, 09:20 AM   #43
hassmaschine
Major General
United_States
3940
Rep
7,216
Posts

Drives: "NBO" 330i
Join Date: Jun 2014
Location: earth

iTrader: (0)

It won't work. The software will ignore it.
Appreciate 0
      12-11-2018, 02:52 PM   #44
SJM67
Enlisted Member
SJM67's Avatar
United_States
24
Rep
48
Posts

Drives: 2008 E92 335I Coupe
Join Date: Dec 2016
Location: 408

iTrader: (0)

Garage List
1995 BMW 318I  [0.00]
2008 BMW 335I  [0.00]
Quote:
Originally Posted by hassmaschine View Post
It won't work. The software will ignore it.
The same with the K+DCAN cable also???
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:04 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST