[Renus]

Does anyone know, E92 335i's F & R brake kit and Sport suspension can install on E90 325i or not?? Thanks ^ ^

[little_croco]

negative, the brake disc sizes are different.

[RR80]

Originally Posted by Renus

Does anyone know, E92 335i's F & R brake kit and Sport suspension can install on E90 325i or not?? Thanks ^ ^

Why not? My friend's 330 is using 335i's brake kit, so did 325i! But you need atleast 18" wheel to accommodate the kit!

[little_croco]

sizes for 330 and 325 are also not the same

[RR80]

Originally Posted by little_croco

sizes for 330 and 325 are also not the same

I think the kit include the 335i's brake rotor which is 348mm if I rememeber it right!

[Renus]

If the brake kit F & R are fit for 325i, what about the Sport Suspension??

[RR80]

Originally Posted by Renus

If the brake kit F & R are fit for 325i, what about the Sport Suspension??

Not sure is there any difference between E92 and E90 for the supsension parts. You can go realoem.com to check for the parts number, that will fit if the parts # is the same.

[335 Freak]

Hi Renus,

Brake kit of 335 F & R will fit 325 so long as you installed the whole set...not just taking the brake caliper of 335 and then, put in 325 with the original 325 disc! Again, take the whole set as I've sold my original 335 E92 F & R kit to a guy with a E90 325 a month ago, through my friendly garage which happened to know the buyer!! Thus, I saw the job to get done right in front of me when I upgraded mine to AP front 6 pot...for front and rear for a smaller AP 4 pot.

As of the suspension, it won't fit.....even 335 E92 and E90 cannot be inter-changeable in terms of suspension kit even for OEM or aftermarket whereby, it just won't fit due to the weight and balance issue for differnt engine and platform!!!

[gn02931341]

Originally Posted by 335 Freak

Hi Renus,

Brake kit of 335 F & R will fit 325 so long as you installed the whole set...not just taking the brake caliper of 335 and then, put in 325 with the original 325 disc! Again, take the whole set as I've sold my original 335 E92 F & R kit to a guy with a E90 325 a month ago, through my friendly garage which happened to know the buyer!! Thus, I saw the job to get done right in front of me when I upgraded mine to AP front 6 pot...for front and rear for a smaller AP 4 pot.

As of the suspension, it won't fit.....even 335 E92 and E90 cannot be inter-changeable in terms of suspension kit even for OEM or aftermarket whereby, it just won't fit due to the weight and balance issue for differnt engine and platform!!!

How you like your AP Brakes? i am thinking to get set for my 335~ how$ u got the AP front 6pot?

[335 Freak]

Originally Posted by gn02931341

How you like your AP Brakes? i am thinking to get set for my 335~ how$ u got the AP front 6pot?

I used to have the Brembo big 6 pot for my prevous Audi 2.7T...I would say the AP is so much better for the same 6 pot set up!! You can really tell the detail of the brake caliper in terms of braking leveling for each level of pressing!! The Brembo isn't having such detail in which, you feel the middle till fully pressed has no function at all.....Then, the passenger ended up pulling their heads to the front every time you press the brake..... You should know what I mean, right??

I bought the AP for HKD20,000 inclusive of installation as the whole kit came with the Ferrodo 2500 pads. Make sure the guy sell you the 362 original AP disc...not a bigger 385mm drilled/slotted BMW disc as it is cheaper product than the original AP slotted disc as AP has No Drilled Disc....

Lots of people get cheated by the bigger and nicer looking drilled/slotted disc and wired up screwed up.. \

Matthew

[gn02931341]

Originally Posted by 335 Freak

I used to have the Brembo big 6 pot for my prevous Audi 2.7T...I would say the AP is so much better for the same 6 pot set up!! You can really tell the detail of the brake caliper in terms of braking leveling for each level of pressing!! The Brembo isn't having such detail in which, you feel the middle till fully pressed has no function at all.....Then, the passenger ended up pulling their heads to the front every time you press the brake..... You should know what I mean, right??

I bought the AP for HKD20,000 inclusive of installation as the whole kit came with the Ferrodo 2500 pads. Make sure the guy sell you the 362 original AP disc...not a bigger 385mm drilled/slotted BMW disc as it is cheaper product than the original AP slotted disc as AP has No Drilled Disc....

Lots of people get cheated by the bigger and nicer looking drilled/slotted disc and wired up screwed up.. \

Matthew

Thanks a lot for ur reply.

I hv been thinking about Brembo too, but i am sure now i will go for AP...(haha!!
HKD20,000 for AP 6pot + installation is nice price, i check with some shop they quote me AP RACING 6 POT CALIPER (10S4+11S4) PRO 5000+ 355MM for HKD20000,AP RACING 4 POT CALIPER (5040-2S4+5040-3S4) PRO 5000+ 345MM for HKD18000 + installtion.
Could you advise which shop u bought it?

3Q

[335 Freak]

Just a friendly garage in Kwun Tong... not a big one but I have been fixing my car and installing mod parts for more than 6 years time..... PM me and I will give you the guy's number to call and you can deal by yr own!!!

Matthew

[Winson]

Can i have the contacts for the AP brake?
Im interested and i think its a good good u get..