[Dtype]

Hello.

I'm tring to get a FRM2 coded to blink brake lights (BFD)
I already coded my FRM1 and was very easy.
But I'm tring to do it on a friends car and can get no way to make it work.
This is what I've changed:

BFD_1_ALGORITHMUS
nicht_aktiv
BFD2_AKTIV
aktiv
BFD2_BFD
blinkend
BFD2_BL
blinkend
BFD2_BL_M
blinkend
BFD2_ESS_ANZEIGE
aktiv
BFD2_ESS_ENABLE
aktiv
BFD2_NSL
blinkend
BFD2_SL_BL_1
blinkend
BFD2_SL_BL_2
blinkend
WBLG_WBL_ENABLE
aktiv

After this change the "normal" BFD wont works as I changed BFD_1_ALGORITHMUS to nicht_aktiv but anything else is different. I have no blinking lights on a hard stop.
Car is a european model.
Thanks in advance.

[sono0312]

Originally Posted by Dtype

Hello.

I'm tring to get a FRM2 coded to blink brake lights (BFD)
I already coded my FRM1 and was very easy.
But I'm tring to do it on a friends car and can get no way to make it work.
This is what I've changed:

BFD_1_ALGORITHMUS
nicht_aktiv
BFD2_AKTIV
aktiv
BFD2_BFD
blinkend
BFD2_BL
blinkend
BFD2_BL_M
blinkend
BFD2_ESS_ANZEIGE
aktiv
BFD2_ESS_ENABLE
aktiv
BFD2_NSL
blinkend
BFD2_SL_BL_1
blinkend
BFD2_SL_BL_2
blinkend
WBLG_WBL_ENABLE
aktiv

After this change the "normal" BFD wont works as I changed BFD_1_ALGORITHMUS to nicht_aktiv but anything else is different. I have no blinking lights on a hard stop.
Car is a european model.
Thanks in advance.

have you checked the following link for your reference?
http://www.e90post.com/forums/showpo...&postcount=154

[Dtype]

Hi.

Yes, I've checked and no good...

[sono0312]

Originally Posted by Dtype

Hi.

Yes, I've checked and no good...

i would suggest you pick up all itmes that will have word of "BDF" even if it is bdf_1, and compare them with a trc file that has bdf succesfully enabled. you are able to find several trc's uploaded in the forum.

Also adding $5AB to VO is one of possible options to your car.
http://www.e90post.com/forums/showpo...8&postcount=82

[Dtype]

Thanks. I've already have one trc file that was on that link. I'll try that next weekend and give you some feedback.

[cuco]

http://www.e90post.com/forums/showth...=500751&page=7

check post #146 and on. Compare your trc with mine (attached to post 146), maybe you need to modify a couple of other settings.

[Dtype]

Originally Posted by cuco

http://www.e90post.com/forums/showth...=500751&page=7

check post #146 and on. Compare your trc with mine (attached to post 146), maybe you need to modify a couple of other settings.

Thanks. Next weekend I will try it.

[Dtype]

Hello. Sorry for the delay, but I already made it on my friends car (e91 320d 2008)
Now I was triyngo to do it again on a e87 (123d 2008) with same FRM module (FRM2) but in this case, I cannot make it work. Any ideas?

Thanks

[Mr-Green]

Originally Posted by Dtype

Hello. Sorry for the delay, but I already made it on my friends car (e91 320d 2008)
Now I was triyngo to do it again on a e87 (123d 2008) with same FRM module (FRM2) but in this case, I cannot make it work. Any ideas?

Thanks

Hi. Will this work on a E90 318i 2008?