[E92_2jz]

Hello from sweden !

I am working on 2jz swapping my e92 (325i ,manual, 2008)

After i took out the n53 engine i have 3 connectors left in the ”ecu box” .
I think the connectors is x60001, x6011 and x60551 . I cant find the pinout for these connectors , can someone help me out ?

I belive i can use many of the cables when i connect my maxxecu and turbolamik ECU

[gbalthrop]

Originally Posted by E92_2jz

Hello from sweden ! I am working on 2jz swapping my e92 (325i ,manual, 2008). After i took out the n53
engine i have 3 connectors left in the ”ecu box” . I think the connectors is x60001, x6011 and x60551 . I cant find the
pinout for these connectors , can someone help me out ?...

Hallå from US! Looks like a Professional Job (except NOT sure that's where the T-Stat goes.

Only wiring info I know of is found in ISTA (Bentley Manual has wiring diagrams from ISTA). ISTA has wiring by
function or Module (e.g. Engine Cooling System/ function, or DME Module). So since the X6011 & X60551 Connectors
connect wires of DIFFERENT Systems or Functions, there is NO PIB/ Pinout, and NO single wiring diagram (SSP) that shows
ALL wires in those connectors.

I attach BOTH the PIB/ Pinout for X60001 DME Connector (one of 7), 26-pin connector, and also the SSP Wiring Diagram
for Connector X60001 (Module 1 of the dME). I attach the Location & Connector View diagrams for X6011 & X60551,
and an EXAMPLE diagram for F11 Fuse Circuit which shows wires in THAT circuit going to X6011 & X60551, and identifying
the Pins of those connectors to which the wires for THAT CIRCUIT connect.

If you need MORE specific information related to X6011, X60551, or any other connector, please provide the following
so we can furnish BEST Possible information:
1) Last-7 Characters of VIN;
2) Photo of Socket Side Connector, showing SMALL socket numbers if possible;
3) Photo of Wiring side of Connector, showing wire colors as best as possible;
4) Location on vehicle (as specific as possible) of the Connector.
5) At LEAST ONE system served by that connector.
George

[E92_2jz]

Originally Posted by gbalthrop

Hallå from US! Looks like a Professional Job (except NOT sure that's where the T-Stat goes.

Only wiring info I know of is found in ISTA (Bentley Manual has wiring diagrams from ISTA). ISTA has wiring by
function or Module (e.g. Engine Cooling System/ function, or DME Module). So since the X6011 & X60551 Connectors
connect wires of DIFFERENT Systems or Functions, there is NO PIB/ Pinout, and NO single wiring diagram (SSP) that shows
ALL wires in those connectors.

I attach BOTH the PIB/ Pinout for X60001 DME Connector (one of 7), 26-pin connector, and also the SSP Wiring Diagram
for Connector X60001 (Module 1 of the dME). I attach the Location & Connector View diagrams for X6011 & X60551,
and an EXAMPLE diagram for F11 Fuse Circuit which shows wires in THAT circuit going to X6011 & X60551, and identifying
the Pins of those connectors to which the wires for THAT CIRCUIT connect.

If you need MORE specific information related to X6011, X60551, or any other connector, please provide the following
so we can furnish BEST Possible information:
1) Last-7 Characters of VIN;
2) Photo of Socket Side Connector, showing SMALL socket numbers if possible;
3) Photo of Wiring side of Connector, showing wire colors as best as possible;
4) Location on vehicle (as specific as possible) of the Connector.
George

Thank u so much 🙏

I am looking for wiring to the ac compressor also , would be nice with working aircon during summer

Henrik

[gbalthrop]

Originally Posted by E92_2jz

... I am looking for wiring to the ac compressor also , would be nice with working aircon during summer
Henrik

The A/C Compressor Control Valve wires go through X6011 as shown in attached ISTA ScreenPrint.
I also attach some "Random" circuits involving X6011, such as CAS Starter solenoid KL50 Activation.
George