|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
N52N Internals + valve cover + stock intake + used water pump + flywheels/clutches
|
|
01-18-2019, 08:46 AM | #1 |
Grandmaster
768
Rep 798
Posts |
N52N Internals + valve cover + stock intake + used water pump + flywheels/clutches
As many of you might know I blew this motor by over-revving it on the highway. The exhaust valves floated and hit the top of the pistons. Maybe more than that happened, but I didn't investigate far enough to find out the extent. The engine probably hit around 9200RPM. Buy parts with this in mind. From a 2011 328i with 100k miles. ------------------------------------------------------------------------------------ I don't have a picture yet but I have a N52N valve cover for sale. Off of a 2011 128i with 88k miles. The bolts are rusty so if yours is cracked or something you could swap your bolts over. Other than rusty bolts it looks fine. $80+ shipping. ------------------------------------------------------------------------------------- I don't have pictures of this yet either but I have a stock (NOT 3 STAGE) intake manifold available from the same 2011 128i with 88k miles. $60+ shipping. -------------------------------------------------------------------------------------- I also have 2 functional water pumps and 2 functional thermostats, one set with 88k, one set with 100k. $15 for each item + shipping. --------------------------------------------------------------------------------------- Lastly I have 2 stock flywheels, clutches, and pressure plates. You guessed it, one set with 88k miles one set with 100k. Each set $30+ shipping. --------------------------------------------------------------------------------------- ALL PARTS BELOW ARE $10+SHIPPING FOR EVERYTHING IN EACH PICTURE. I KNOW MOST OF THEM WILL PROBABLY GO UNSOLD AND I'LL END UP THROWING THEM AWAY, IT JUST FELT WRONG TO TRASH THEM IN CASE SOMEONE OUT THERE NEEDS THEM. OIL PUMP VANOS GEARS CAM CHAIN GUIDE EXHAUST VALVES AND SPRINGS/KEEPERS (VALVES HIT THE PISTONS) MILV VALVETRONIC SHIM SPRINGS CRANKCASE OIL BAFFLE PLATE THING OIL PUMP CHAIN AND CAM CHAIN WITH DRIVE SPROCKETS FRONT CRANK BOLT VACUUM PUMP OIL PICKUP TUBE LIFTERS, ROCKERS CAM CHAIN TENSIONER PISTONS $10 EACH (VALVES KISSED PISTON TOPS) (ID LIKE TO KEEP 1 PISTON FOR MYSELF)
__________________
Daily - 2018 Alpinweiß ///M2 6MT Exec Rain/Snow/Winter - 2011 328i 6MT Sedan - Black on Black, Sport Package Sold, But Not Forgotten - 2009 135i 6MT - Black on Black, M-sport, JB4 Last edited by Joebie; 01-18-2019 at 08:52 AM.. |
01-18-2019, 11:46 AM | #2 |
Private First Class
65
Rep 156
Posts |
Did the exhaust cam get toasted? I've been getting a little antsy watching this other thread
https://www.e90post.com/forums/showthread.php?t=1571178
__________________
N52 | +1mm MILVs | Catless | 3-Stage IM | BPC Tune | 3.64 diff | AirLift Performance 3H | M3 Control Arms | SPL Parts BumpSteer Correction | UUC Evo 3 Shifter | CCV Delete | Valeo SMF Flywheel | CSF Aluminum Rad | VAC Front Hub Extenders | BMS Cowl Filter Delete
|
Appreciate
0
|
01-18-2019, 12:25 PM | #3 | |
Grandmaster
768
Rep 798
Posts |
Quote:
I also used an open end wrench on the end of the exhaust cam so it got a bit chewed up from that. I don't think it damaged the functionality of the cam though. Do you want it still? PM if you want it.
__________________
Daily - 2018 Alpinweiß ///M2 6MT Exec Rain/Snow/Winter - 2011 328i 6MT Sedan - Black on Black, Sport Package Sold, But Not Forgotten - 2009 135i 6MT - Black on Black, M-sport, JB4 |
|
Appreciate
1
dwashy64.50 |
Bookmarks |
|
|