BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > Regional Forums > Australia > Australia Classifieds Section > FS: Spec twin-plate clutch kit with single mass flywheel to suit N54 engine

Thread Tools Search this Thread
      02-14-2019, 01:36 AM   #1
PeterY's Avatar

Drives: Graphite E92 335i N54 6MT
Join Date: Jan 2012
Location: Melbourne, Australia

iTrader: (0)

Garage List
2007 BMW 335i  [0.00]
FS: Spec twin-plate clutch kit with single mass flywheel to suit N54 engine

Selling a SPEC twin-clutch clutch kit includes a lightweight Single Mass Flywheel to suit manual 8-bolt N54 engines in all '06, '07 and '08 135i/335i.

Location: Essendon, Victoria
Price: $500
Shipping: yes willing to ship anywhere in Australia at buyer's expense

This clutch kit is rated to handle 1250Nm of torque 💪🏼

🚨 NOTE: this clutch is currently slipping when ran on E85 MHD Stage2+ (FBO), when the tune was backed down to Stage 2, it ran fine, it will require two new clutch plates, looking at $299 USD + shipping.

So that you’re not up for any hidden costs, this is what’s required:

1- Two new clutch plates kit (front clutch and rear clutch) - $299 USD
2- Resurfacing the single mass flywheel (optional but recommended) - cost will depend on the workshop doing the work.
3- x9 high tensile M6x60mm pressure plate bolts (one time use only)- $8 for the lot.

Brand new, this clutch kit is $2,800 AUD delivered, so even with the required rebuild costs listed above, it’s a great value to get into a Single Mass Flywheel and a clutch kit that holds 1250Nm.

You will have to email ProTuning Freaks (PTF), MOTIV Motorsport or SPEC themselves to buy the replacement clutches, they’re $299 USD for the two discs, I read somewhere on the forums that SPEC are cheaper than going through MOTIV or PTF.

Will be suitable for a high horsepower manual car with upgraded turbos or a big single turbo build, OR a car that sees the drag strip or the track often.

Lastly, this lightweight steel Single Mass Flywheel is modular and can be used with any SPEC clutch kit, so even if you have no intention to run a twin-plate clutch kit, you can still reuse the flywheel in this kit to mate it with a SPEC Stage 1, 2, 2+, 3, 3+, 4 or 5 clutch kits. The part number for this flywheel is “SB53S”. The price I am selling this whole kit for, is cheaper than buying a new Spec Single Mass Flywheel on its own.

Pictures with annotations:

Sparkling Metallic Graphite 335i Coupe 6MT (Build Thread) | MHD Stage 2+ | Wagner EVO2 FMIC | Öhlins R&T coilovers with 7/12 Swift springs | Dinan Camber Plates | Rear HardRace full ball-jointed toe arms, upper camber arms and guide rods | Front M3 control arms with Monoballs ball-joints | E93 M3 Front & Rear Sway Bars | Nolathane rear subframe bushings | HEL Performance SS braided brake lines | 19" BMW 313 Rims | M3 Steering Wheel | CIC+Combox retrofit
Appreciate 0


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 11:24 AM.

Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST