[gww50]

When trying to Code the Battery Ah Setting in the CAS module following the guide (new battery is different from original) (Aftermarket Battery Registration DIY.pdf), I received an error: >

COAPI-1141: FSW invalid HELL_OFFSET_DEFAULT

Just after step 4.:

Coding the Battery Ah Setting in the CAS Module
1. Just to avoid any mistake close NCS we are going to start from the beginning.
2. Load NCS >File>load profile> “FSW PSW MAN”
3. F1>F3>select your chassis>select “CAS”
4. Press F6 for back

COAPI-1141: FSW invalid HELL_OFFSET_DEFAULT

What am I doing wrong? I am coding a 2011 328i Sedan using NCSExpert and v.57.0_SP-Daten.
NCS-Expert V4.0.1
CoAPI: V3.13.2
KrAPI: 3.0.2
Ediabas: V7.3.0

[cryptomit]

Try to use these profiles, there is EXPERT MAN, should be better.
https://www.dropbox.com/s/7ubyjfczit...files.rar?dl=0
Also make sure that you have FSW_PSW.man file in WORK folder and it's blank file.

[deeLow]

As said, make sure you have a blank man file. I had deleted mine prior to battery registration and it wouldn't stick when I tried and I got errors. Once I realized and fixed the problem everything worked as it should.

[gww50]

Thank You!

The problem was that FSW_PSW.MAN was not empty.