|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
New JB3 Customer Stock Turbo Dyno Record!!! 439rwhp & 448lbs. tq.
|
|
05-08-2009, 08:42 PM | #1 |
Brigadier General
393
Rep 3,305
Posts |
New JB3 Customer Stock Turbo Dyno Record!!! 439rwhp & 448lbs. tq.
First we did some runs on 91 octane on map 6, & were pleased but definitely not where we wanted to be.
Then decided to put in a half gallon of 104oct. w/ my remaining 91oct. making a low end 93 octane, also on map 6. We still weren't ideally where we wanted to be HP wise so we added 2 gallons of 104oct. making closer to 100oct.(still a race gas mixture) using map 7. During the 1st few pulls we were using the Riss Racing intake, at this point, we were a little disappointed & frustrated with the results but figured it had to do with the weather(85 degrees), 19" heavy rims, etc...But on a whim decided to swap out the RR intake for the BMS DCI & see if it made any difference, this was suggested by the shop manager at Specialty Z & we decided to give it a shot. What happened next put a VERY big smile on my face. The power instantly jumped up 30rwhp to 417rwhp on 94oct. utilizing map 7. The next pull we switched to map 8 & made 427rwhp on 94oct.(record I believe), and on our 2nd to last run got the NEW Customer Dyno Record @ 439rwhp & 448lbs. tq. on a custom map using the BMS tuning gauge with tuning gauge values - HP=A, TQ = A. We would have liked to test all the maps on 91 and 93 octane again with the BMS DCI but once the octane is poured in you can't unpoor it, nobody was willing to get a hose & suction it out So we'll be going back in a couple weeks and retesting more thoroughly on 91oct.. Terry made 390rwhp on 91oct. so hopefully I can match that or higher! **We were also switching maps basically every 2 runs so lack of adaption time caused a few boost ripples, nothing that can't be fixed & I'll definitely be throwing in a new DV ASAP!** Performance Mods: JB3 1.3 8D3 Evolution Racewerks FMIC Riss Racing catless DP's Riss Racing catless MP's Riss Racing Air intake scoops BMS DCI Thank you: Burger Tuning Riss Racing Evolution Racewerks
__________________
Last edited by nlakind; 05-09-2009 at 03:08 AM.. |
05-08-2009, 09:05 PM | #3 |
Lieutenant
18
Rep 429
Posts |
[QUOTE=nlakind;5085436]First we did some runs on 91 octane on map 6, & were pleased but definitely not where we wanted to be.
Then decided to put in a half gallon of 104oct. w/ my remaining 91oct. making a low end 93 octane, also on map 6. We still weren't ideally where we wanted to be HP wise so we added 2 gallons of 104oct. making a 94oct.(race gas mixture) using map 7. During the 1st few pulls we were using the Riss Racing intake, at this point, we were a little disappointed & frustrated with the results but figured it had to do with the weather(85 degrees), 19" heavy rims, etc...But on a whim decided to swap out the RR intake for the BMS DCI & see if it made any difference, this was suggested by the shop manager at Specialty Z & we decided to give it a shot. What happened next put a VERY big smile on my face. The power instantly jumped up 30rwhp to 417rwhp on 94oct. utilizing map 7. The next pull we switched to map 8 & made 427rwhp on 94oct.(record I believe), and on our 2nd to last run got the NEW Customer Dyno Record @ 439rwhp & 448lbs. tq. on a custom map using the BMS tuning gauge with tuning gauge values - HP=A, TQ = A. We would have liked to test all the maps on 91 and 93 octane again with the BMS DCI but once the octane is poured in you can't unpoor it, nobody was willing to get a hose & suction it out So we'll be going back in a couple weeks and retesting more thoroughly on 91oct.. Terry made 390rwhp on 91oct. so hopefully I can match that or higher! **We were also switching maps basically every 2 runs so lack of adaption time caused a few boost ripples, nothing that can't be fixed & I'll definitely be throwing in a new DV ASAP!** Performance Mods: JB3 1.3 8D3 Evolution Racewerks FMIC Riss Racing catless DP's Riss Racing catless MP's Riss Racing Air intake scoops BMS DCI Thank you: Burger Tuning Riss Racing Evolution Racewerks NICE! Way to represent! Did you get any boost numbers (BMS gauge has peak and instant, right?) That BMS guage might be an under-appreciated mod among the other popular mods you have. Good work in any case!
__________________
2014 Audi S5 DSG
2011 335xi Sedan (retired) 2008 335xi Sedan (retired) |
Appreciate
0
|
05-08-2009, 09:05 PM | #4 |
General
665
Rep 26,878
Posts
Drives: 2-325 330 2-335 2-Z4 2-135 X5d
Join Date: Mar 2007
Location: Huntington Beach, CA
|
Damn that's good!!
|
Appreciate
0
|
05-08-2009, 09:06 PM | #5 |
General
665
Rep 26,878
Posts
Drives: 2-325 330 2-335 2-Z4 2-135 X5d
Join Date: Mar 2007
Location: Huntington Beach, CA
|
|
Appreciate
0
|
05-08-2009, 09:23 PM | #9 |
General
665
Rep 26,878
Posts
Drives: 2-325 330 2-335 2-Z4 2-135 X5d
Join Date: Mar 2007
Location: Huntington Beach, CA
|
No Gauge lol?
|
Appreciate
0
|
05-08-2009, 09:28 PM | #10 |
☠☠☠☠☠
21
Rep 684
Posts
Drives: 07 Blk e92 335i
Join Date: Aug 2007
Location: HK
|
|
Appreciate
0
|
05-08-2009, 10:03 PM | #13 |
Vengeance is mine, I shall repay
132
Rep 4,656
Posts |
damn those are great numbers...curious to see what numbers i put up after my mods go on next week and the meth is installed...
__________________
Project: Vengeance[ACM's King of domestics, STOCK:501whp 489wtq | 2.9L whipple stock bottom end: 706whp 688wtq] Callies Compstar motor build:NEXT
|
Appreciate
0
|
05-08-2009, 10:13 PM | #14 |
Brigadier General
335
Rep 4,633
Posts |
WOW! Congrats, that is some awesome power!
Now post a picture of your ROFL!!! its my wallpaper.
__________________
Current: E63S AMG 4matic RENNtech || M5 Evolve..Eventuri || F10 LCI 535i MHD
|
Appreciate
0
|
05-08-2009, 11:06 PM | #18 |
Lieutenant Colonel
108
Rep 1,973
Posts
Drives: 2009 e92 MR "Civic" ///M3
Join Date: Feb 2009
Location: Miami, FL
|
two words, damn! damn! nice numbers dude, congrats.
__________________
|| DCT | ESS Tune | ACM Test-pipes | AA Green Filter | Swift Spec-R Springs | Stoptech ST-40 F || || My Youtube Channel ||
|
Appreciate
0
|
05-08-2009, 11:11 PM | #19 |
Professional Moose Racer
316
Rep 7,509
Posts |
THat's ballsy
__________________
Visit my blog anytime: http://www.sfpayments.com
BMW Dream Team PNW Chapter, member #1 |HP Autowerks | AR DESIGN | BMW PERFORMANCE | STOP TECH | Volk Racing| AMS | ARKYM |
Appreciate
0
|
Bookmarks |
|
|