[Savedamanualse90]

Originally Posted by Xidino123

Hi everyone,

I would like to share my experience using IstaP with D -Can (Expert Pro from bimmergeeks).
Initially I tried update the DDE only using winkfp, it proceed as it should once all setting, 0pa and 0da selection in comfort mode was determined by winkfp automatically.
So all set and proceed, until 100% progress done, then a popup messege appeared telling that the uif has 1 more time to be written do you want to proceed. The user option were OK or Cancel.
My response was wrong because I select Cancel instead of OK. (my bad, did not know).
This caused the DDE program state 15(abandoned mode).
As you can guess, the car won't start, bunch of error code from all over other module, egs, cas, dsc, ekp all has consistent wrong messege type error code.
Sigh... After contemplating, and thinking I decide to use IstaP to test all modules.
The Ista P suggested programming and coding all modules except the multimedia which use MOST interface that the cable I own doesn't support.
So action plan was determined to program and code all mdule and accepted,... And proceeded with murmuring heart.
The process goes arround 40 minutes total.
Part of the proses is here

Power was supplied by hooking to another car running. Laptop was connected to power supply.

Used tool:
Expert pro DCAN cable from bimmergeeks
IstaP stand alone with IstaP loader 6.1installed native on macbook Pro running windows 7 bootcamp.
Battery jumper, and another car for sure.

Result:Successfully programmed all modules.
Car runs great after that.

can send me a link for ista download? im running w10 on bootcamp.

[Xidino123]

Originally Posted by Savedamanualse90

can send me a link for ista download? im running w10 on bootcamp.

https://mega.nz/#!NJBBnCha!4LRyCAktyZWT2EP_qOQQcuOKqyA8N_ayeOKk7qp JTHY

[mkkole]

Xidino123

Please tell us which issue did you had with your BMW? What was the reason for updating all modules?

ANd how long it takes for updating all modules?

I have an E91, and wondering to update it.

Thanks,

[Mantraxalos]

I think he said 40 minutes to complete.

[J0K3R5]

click on my link

[Mantraxalos]

Joker, this is so great. I love the way OneDrive works and you have everything laid out so logically. This will become my new homepage .
Thanks.

Originally Posted by J0K3R5

click on my link

[joshyg1]

Hello,

I have a 03 E65 745i and I need help programming a replacement module. I have the INPA tool set with a D-KAN cable but it doesn't seem to be working properly....idk if my software is messed up or what!

Can someone please help me set up new software on my laptop with windows 10?

Thank you!

PS. You guys seen really knowledgeable about these things and I'm brand new and confused....

[sdbmwcoding]

Originally Posted by joshyg1

Hello,

I have a 03 E65 745i and I need help programming a replacement module. I have the INPA tool set with a D-KAN cable but it doesn't seem to be working properly....idk if my software is messed up or what!

Can someone please help me set up new software on my laptop with windows 10?

Thank you!

PS. You guys seen really knowledgeable about these things and I'm brand new and confused....

Delete the software you currently have completely (control panel > add remove programs) then go to bimmergeeks.net/downloads you'll find what you need there

[ctuna]

I believe before 3/07 you needed a K can cable at least
this was true for the 3 series.
I have a k can only for my 06 3
Don't know if the Bimmergeeks downloads cover anything but the
6 cylinder gas and maybe diesels . Does anybody know?

[joshyg1]

Originally Posted by sd*********

Delete the software you currently have completely (control panel > add remove programs) then go to bimmergeeks.net/downloads you'll find what you need there

Thank you for the step by step, I'm doing that now. I'm not exactly sure what I need to get in order to do what I need to thought... Oh also I have the k+DCAN cable, that should do what I need right?

[sdbmwcoding]

Originally Posted by joshyg1

Thank you for the step by step, I'm doing that now. I'm not exactly sure what I need to get in order to do what I need to thought... Oh also I have the k+DCAN cable, that should do what I need right?

Yes bmw standard tools is everything you'd need

[joshyg1]

Great, thank you!

I hate to ask but i downloaded it and for some reason it wont open at all, would you be able to remote install and set up for me? I must be doing something wrong because everytime I try to do it it doesn't work correctly.

Thank you for all of your help!

[sdbmwcoding]

Originally Posted by joshyg1

Great, thank you!

I hate to ask but i downloaded it and for some reason it wont open at all, would you be able to remote install and set up for me? I must be doing something wrong because everytime I try to do it it doesn't work correctly.

Thank you for all of your help!

Are you stuck at the first install part? Gotta make sure you're running it in windows 7 compatibility mode or else it won't open. Gotta follow the instructions in the downloaded text file exactly.

Just found this YouTube video on the step by step download process for the bimmergeeks install. Just follow those steps and you'll be good to go.

[joshyg1]

Originally Posted by sd*********

Are you stuck at the first install part? Gotta make sure you're running it in windows 7 compatibility mode or else it won't open. Gotta follow the instructions in the downloaded text file exactly.

Just found this YouTube video on the step by step download process for the bimmergeeks install. Just follow those steps and you'll be good to go.

Awesome Thanks so much, I'm going to try this right now!

[guruarj]

Originally Posted by J0K3R5

click on my link

I was able to browse the files yesterday. however, I can't see them anymore.
The files are not accessible.

[elthox]

Originally Posted by ctuna

I believe before 3/07 you needed a K can cable at least
this was true for the 3 series.
I have a k can only for my 06 3
Don't know if the Bimmergeeks downloads cover anything but the
6 cylinder gas and maybe diesels . Does anybody know?

Spdatens posted there cover all E chassis and engines

[J0K3R5]

Originally Posted by guruarj

I was able to browse the files yesterday. however, I can't see them anymore.
The files are not accessible.

The one drive is playing up, Im busy transferring all the files to my MEGA account.
I know it has a 5gb limit for non members, but there is a way to get around this problem.

https://github.com/tonikelope/megaba...ases/tag/v7.12

https://www.reddit.com/r/Piracy/comm...s_megabasterd/



The MEGA link : https://mega.nz/#F!18BUEKyI!ifUrK_Kp9iwXnd8QHdl79Q

Though Im still uploading to it, Ive got over 700gb still to upload.

[Joe@TopGearSolutions]

I noticed my BMW Standard Tools install was included in your collection. However, I'd recommend you grab the latest version, as I have made a few updates/tweaks since then.

https://www.e90post.com/forums/showthread.php?t=1204192

Originally Posted by J0K3R5

The one drive is playing up, Im busy transferring all the files to my MEGA account.
I know it has a 5gb limit for non members, but there is a way to get around this problem.

https://github.com/tonikelope/megaba...ases/tag/v7.12

https://www.reddit.com/r/Piracy/comm...s_megabasterd/



The MEGA link : https://mega.nz/#F!18BUEKyI!ifUrK_Kp9iwXnd8QHdl79Q

Though Im still uploading to it, Ive got over 700gb still to upload.

[ctuna]

Easy to become a Mega member and 5 bucks a month for
unlimited speed downloads last time I used it . So much easier
to do this stuff now that I have 300 megs download speed.
Took days at 25 megs.

[Joe@TopGearSolutions]

Originally Posted by ctuna

Easy to become a Mega member and 5 bucks a month for
unlimited speed downloads last time I used it . So much easier
to do this stuff now that I have 300 megs download speed.
Took days at 25 megs.

I prefer Media Fire, seemed to be more stable for me. And, there's no DL limit for anyone. I only have to pay a monthly subscription (annually really) to increase my storage.

[J0K3R5]

Thankyou Joe@TopGearSolutions,

Ill get the update uploaded.

[chmura]

Anyone have ISTA-D version 4.15.32?? I tried to search online I am having trouble finding a download link.