What did you do to your car today?

Emilime75 · 03-20-2020, 11:23 PM

When I've done these in the past, taking them out of the car just made it harder. I found it easier in the car, without the wheel flopping around wishing I had another hand or 2 to hold it.

ny325 · 03-21-2020, 01:00 AM

My car is sitting, waiting to be driven. With the Pandemic, pretty much everything is closed. Let’s all pray conditions get better

mecheng77 · 03-21-2020, 01:26 AM

I detailed my car and used this nanoskin sponge
Instead of clay bar, it worked well and it's no issue if you drop it. After two uses it's still in mint condition. Have you guys used it?
I followed with a mothers polish and nufinish car wax, paint is silky smooth smooth now.

Emilime75 · 03-21-2020, 07:24 AM

I've been using the Mother's branded one and I like it. Like you said, seems to last and no worries if you drop it. Just rinse it off and you're good to go.

RealJ22 · 03-21-2020, 04:52 PM

Quote:

Originally Posted by mweisdorfer

How LONG did it take you to stitch the new cover on by hand?

Good idea by taking the steering wheel out of the car

I just did it one section at a time. A little over an hour or so.

I bought this wheel from someone on FB. I wanted the updated paddles, but those were $160 alone. Found this entire wheel in MINT condition for $80. Already had the wrap sitting for my other Push/pull wheel. I will be wrapping that one now and selling it.

213e90n51 · 03-21-2020, 04:58 PM

Drive on the 110 fwy to use up old gas since its empty because of corona virus.

ny325 · 03-21-2020, 06:27 PM

My E90 is in " Stay at home mode."

unrulyteach · 03-21-2020, 06:34 PM

Installed catch can on my n55, fixed shifter wires that were broken and detailed it

neilvan · 03-21-2020, 07:33 PM

Swapped the headliner to Anthracite on my fathers 07. We were lucky that we were able to pick up all the parts cheaply from a wrecked one and it does make a big difference. He wasnt sure about it until he drove my M-sport and was sold.

20200321_184743

Serf27 · 03-21-2020, 07:48 PM

Day 2 of quarantine: I cleaned out the cabin temp sensor. I was also able to really clean the temp screen since the cover was off.

4 Doors · 03-21-2020, 11:05 PM

Broke the MAP sensor for the charge pipe. Realized nothing local was opened and ordered a new one on FCP. Hoping deliveries are still happening this week!

Boosted12a · 03-21-2020, 11:45 PM

I removed the hoses on my compressor bypass valves. Got some small filters with 1" openings to put on the aftermarket cbv and plugged off the nipples on the intake tubes. I figure I'll do it now in prep for some relocated inlets. Planning on trying the new ARM inlets.

SJM67 · 03-22-2020, 12:33 AM

reset my brake service interval after having Powersport brake kit installed....BIG difference in stopping power with these ceramic pads...

Afanz · 03-22-2020, 01:47 PM

Went to start the car and was welcomed by the warm glow of the SES light

nighthawk335 · 03-23-2020, 06:07 PM

Got around to installing my VRSF 7.5" intercooler, charge pipe, IND painted side reflectors, and smoked side markers. The fitment on the VRSF stuff was garbage, but I made it work. The side markers, and painted side reflectors go a long way for looks IMO

I plan on getting rid of the amber bulbs in the side markers as well. The LED replacement bulbs didn't fit, so stealth bulbs it is for those.

Please ignore my filthy bay. I haven't had time to detail it since the weather is just getting better in Chicago.

nighthawk335 · 03-23-2020, 06:10 PM

I couldn't fit all the photos on the last post, but I also installed a yellow start/stop button from IND, their "Limited Edition" trim ring, and I enabled the rear fog lights

ny325 · 03-23-2020, 06:11 PM

Took it out for a essential run. Had to do some banking. Came back, and put it in quarantine.

E93_Savage · 03-23-2020, 11:24 PM

Walbro 450 Upgrade didnt take many pictures just did it.

Serf27 · 03-23-2020, 11:44 PM

Quote:

Originally Posted by dailydrivens30

Walbro 450 Upgrade didnt take many pictures just did it.

How long did this take?
I’ve had the 450 for months and haven’t installed it.

213e90n51 · 03-24-2020, 12:21 AM

Quote:

Originally Posted by nighthawk335

I couldn't fit all the photos on the last post, but I also installed a yellow start/stop button from IND, their "Limited Edition" trim ring, and I enabled the rear fog lights

Ohhh shtttt i gotta get one of those rings! The lci model has the black chippings and how much were these where can i aqquire them?

E93_Savage · 03-24-2020, 01:13 AM

Quote:

Originally Posted by Serf27

How long did this take?
I’ve had the 450 for months and haven’t installed it.

I did it in two days and broke my seat(pull up sharply ON BOTH SIDES AT THE SAME TIME) I also have a devil child that requires a lot of my time.

If you have everything laid out mabey 3-4 hours just take your time and pray you dont struggle with the fuel lines like I did.

mweisdorfer · 03-24-2020, 08:22 AM

Replaced the handle on the passenger's, front side with an aftermarket. It peeled. It's been that way forever, but I saw where you can drill out the handle with a 3/8" drill bit and install the new one using screws on the back end. That's always been my hang up was drilling the old one out but how to secure the new one!?

So, it took maybe 45 min to install and put it all back together. The handle is secure and has no play in it what-so-ever. I was able to use my OEM top cover. So, all I was out was $20.00! 😃

Right Inner Door Panel Handle Pull Trim Cover For BMW E90 3-Series Sedan Replace Part Number: 51417230850, 51-41-7-230-850 https://www.amazon.com/dp/B0761PLK43..._GJGEEbKBKQ2F6

03-20-2020, 11:23 PM	#11331
Emilime75 Colonel 1209 Rep 2,476 Posts Drives: 2010 335i E92 LeMans Blue Join Date: Dec 2017 Location: Merica! iTrader: (1)	When I've done these in the past, taking them out of the car just made it harder. I found it easier in the car, without the wheel flopping around wishing I had another hand or 2 to hold it.
	Appreciate 0 Quote

03-21-2020, 01:00 AM	#11332
ny325 Brigadier General 895 Rep 3,141 Posts Drives: Jet Black E90 Join Date: Feb 2007 Location: Gridlock iTrader: (0)	My car is sitting, waiting to be driven. With the Pandemic, pretty much everything is closed. Let’s all pray conditions get better Last edited by ny325; 03-21-2020 at 01:09 AM..
	Appreciate 2 Afanz14.00 bimmerfan197294.00 Quote

03-21-2020, 01:26 AM	#11333
mecheng77 Colonel 1006 Rep 2,243 Posts Drives: 2007 328i / 2014 M235i Join Date: Nov 2017 Location: Ontario Canada iTrader: (0) Garage List [0.00] [0.00]	I detailed my car and used this nanoskin sponge Instead of clay bar, it worked well and it's no issue if you drop it. After two uses it's still in mint condition. Have you guys used it? I followed with a mothers polish and nufinish car wax, paint is silky smooth smooth now. Attached Images
	Appreciate 0 Quote

03-21-2020, 07:24 AM	#11334
Emilime75 Colonel 1209 Rep 2,476 Posts Drives: 2010 335i E92 LeMans Blue Join Date: Dec 2017 Location: Merica! iTrader: (1)	I've been using the Mother's branded one and I like it. Like you said, seems to last and no worries if you drop it. Just rinse it off and you're good to go.
	Appreciate 1 mecheng771006.00 Quote

03-21-2020, 04:58 PM	#11336
213e90n51 Banned 367 Rep 780 Posts Drives: 2009 BMW 328i, Honda Civic Hat Join Date: Mar 2020 Location: Los Angeles iTrader: (0) Garage List 2009 328i [0.00] 2019 M4 [0.00] 2019 Honda Civic Ha ... [0.00]	Drive on the 110 fwy to use up old gas since its empty because of corona virus.
	Appreciate 0 Quote

03-21-2020, 06:27 PM	#11337
ny325 Brigadier General 895 Rep 3,141 Posts Drives: Jet Black E90 Join Date: Feb 2007 Location: Gridlock iTrader: (0)	My E90 is in " Stay at home mode."
	Appreciate 0 Quote

03-21-2020, 06:34 PM	#11338
unrulyteach Colonel 392 Rep 2,367 Posts Drives: 2011 335i Join Date: May 2016 Location: myrtle beach sc iTrader: (0) Garage List 2011 BMW 335i [0.00]	Installed catch can on my n55, fixed shifter wires that were broken and detailed it
	Appreciate 0 Quote

03-21-2020, 07:33 PM	#11339
neilvan Major 858 Rep 1,363 Posts Drives: 09 E90 335i M-Sport 6MT RWD Join Date: Nov 2017 Location: Ontario, Canada iTrader: (0) Garage List 2007 BMW E61 530xi [0.00] 1993 Mazda Miata [0.00] 2009 BMW E90 335i [0.00]	Swapped the headliner to Anthracite on my fathers 07. We were lucky that we were able to pick up all the parts cheaply from a wrecked one and it does make a big difference. He wasnt sure about it until he drove my M-sport and was sold. 20200321_184743
	Appreciate 1 RealJ221039.00 Quote

03-21-2020, 07:48 PM	#11340
Serf27 Brigadier General 2848 Rep 4,322 Posts Drives: 335i Join Date: Apr 2018 Location: Sitting in a BMW. iTrader: (-1)	Day 2 of quarantine: I cleaned out the cabin temp sensor. I was also able to really clean the temp screen since the cover was off. Attached Images __________________ E90 335i-408WHP. Alpine over Terra brown E70 X5 35i M Sport-Stage1 Tune. Alpine over Black E91 328 M Sport-Alpine over Black-Alpine over Saddle brown. E93 335i-DINAN tuned. Alpine over Saddle brown
	Appreciate 4 Barrique91394.50 4 Doors1169.00 salpone125.00 unrulyteach392.00 Quote

03-21-2020, 11:05 PM	#11341
4 Doors Major 1169 Rep 1,478 Posts Drives: 2008 BMW 335xi (E90) Join Date: Mar 2018 Location: Michigan iTrader: (4) Garage List 2008 BMW 335xi [10.00]	Broke the MAP sensor for the charge pipe. Realized nothing local was opened and ordered a new one on FCP. Hoping deliveries are still happening this week! __________________ Instagram: @4doors Current: 2011 E91 328i M-Sport Touring Past: 2008 E90 335xi 1996 E36 328i Sport
	Appreciate 0 Quote

03-21-2020, 11:45 PM	#11342
Boosted12a Second Lieutenant 68 Rep 210 Posts Drives: BMW 335i x Join Date: Jun 2019 Location: Va iTrader: (0)	I removed the hoses on my compressor bypass valves. Got some small filters with 1" openings to put on the aftermarket cbv and plugged off the nipples on the intake tubes. I figure I'll do it now in prep for some relocated inlets. Planning on trying the new ARM inlets.
	Appreciate 0 Quote

03-22-2020, 12:33 AM	#11343
SJM67 Enlisted Member 24 Rep 48 Posts Drives: 2008 E92 335I Coupe Join Date: Dec 2016 Location: 408 iTrader: (0) Garage List 1995 BMW 318I [0.00] 2008 BMW 335I [0.00]	reset my brake service interval after having Powersport brake kit installed....BIG difference in stopping power with these ceramic pads...
	Appreciate 1 Afanz14.00 Quote

03-22-2020, 01:47 PM	#11344
Afanz Enlisted Member 14 Rep 45 Posts Drives: 2009 BMW 328xi Join Date: Oct 2019 Location: Ann Arbor Mi iTrader: (0)	Went to start the car and was welcomed by the warm glow of the SES light Attached Images
	Appreciate 2 unrulyteach392.00 Kuokonut10.50 Quote

03-23-2020, 06:07 PM	#11345
nighthawk335 Enlisted Member 52 Rep 46 Posts Drives: 2011 BMW E90 335i 6MT Join Date: Aug 2017 Location: Chicago iTrader: (0) Garage List 2011 BMW 335i [0.00]	Got around to installing my VRSF 7.5" intercooler, charge pipe, IND painted side reflectors, and smoked side markers. The fitment on the VRSF stuff was garbage, but I made it work. The side markers, and painted side reflectors go a long way for looks IMO I plan on getting rid of the amber bulbs in the side markers as well. The LED replacement bulbs didn't fit, so stealth bulbs it is for those. Please ignore my filthy bay. I haven't had time to detail it since the weather is just getting better in Chicago. Attached Images
	Appreciate 0 Quote

03-23-2020, 06:10 PM	#11346
nighthawk335 Enlisted Member 52 Rep 46 Posts Drives: 2011 BMW E90 335i 6MT Join Date: Aug 2017 Location: Chicago iTrader: (0) Garage List 2011 BMW 335i [0.00]	I couldn't fit all the photos on the last post, but I also installed a yellow start/stop button from IND, their "Limited Edition" trim ring, and I enabled the rear fog lights Attached Images
	Appreciate 0 Quote

03-23-2020, 06:11 PM	#11347
ny325 Brigadier General 895 Rep 3,141 Posts Drives: Jet Black E90 Join Date: Feb 2007 Location: Gridlock iTrader: (0)	Took it out for a essential run. Had to do some banking. Came back, and put it in quarantine.
	Appreciate 1 4 Doors1169.00 Quote

03-23-2020, 11:24 PM	#11348
E93_Savage Private First Class 153 Rep 108 Posts Drives: 73 240z , 09 335i Join Date: Apr 2018 Location: Oakland, CA iTrader: (0)	Walbro 450 Upgrade didnt take many pictures just did it. Attached Images
	Appreciate 0 Quote

03-24-2020, 08:22 AM	#11352
mweisdorfer Major General 1903 Rep 6,968 Posts Drives: 2007 Black/Black 335i e90 Join Date: Apr 2011 Location: Holly, MI iTrader: (0) Garage List 2007 BMW E90 335i [0.00] 2008 bmw x5 [0.00]	Replaced the handle on the passenger's, front side with an aftermarket. It peeled. It's been that way forever, but I saw where you can drill out the handle with a 3/8" drill bit and install the new one using screws on the back end. That's always been my hang up was drilling the old one out but how to secure the new one!? So, it took maybe 45 min to install and put it all back together. The handle is secure and has no play in it what-so-ever. I was able to use my OEM top cover. So, all I was out was $20.00! 😃 Right Inner Door Panel Handle Pull Trim Cover For BMW E90 3-Series Sedan Replace Part Number: 51417230850, 51-41-7-230-850 https://www.amazon.com/dp/B0761PLK43..._GJGEEbKBKQ2F6
	Appreciate 0 Quote