|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Fuel Pump Issue?
|
|
10-12-2020, 10:37 AM | #1 |
New Member
3
Rep 20
Posts |
Fuel Pump Issue?
So I've recently noticed on my n54 e92 that the car has trouble starting whenever the fuel pump does not prime. It sputters for a couple seconds and I have to give it some revs to stay running but once it runs, it drives great. My question is should the car be sputtering just because the fuel pump does not prime? Every other time that the fuel pump has primed itself, it starts just fine. I included a log of my startup and this was when it primed. Will be back shortly to log the startup when it does not prime.
https://datazap.me/u/ivanwang811/sta...ata=3-13-21-22 |
10-17-2020, 10:39 AM | #3 |
First Lieutenant
130
Rep 312
Posts |
Lift your rear seat off, remove those metal covers for the fuel pressure regulator and pump and stick your nose in there smelling for fuel. If you smell fuel or gas then replace.
|
Appreciate
0
|
10-17-2020, 11:31 AM | #4 |
Major
700
Rep 1,228
Posts |
The log you posted looks good, stable pressures and nothing out of the ordinary. If you have a log where the issue actually occurred that would be much more useful.
|
Appreciate
0
|
10-21-2020, 12:15 PM | #5 |
New Member
3
Rep 20
Posts |
https://datazap.me/u/ivanwang811/3rd...ata=2-13-21-22
Here is a 3rd gear WOT didn't rev it all the way up but I'm pretty sure the fuel pressures are normal? |
Appreciate
0
|
10-21-2020, 11:17 PM | #6 |
Brigadier General
2685
Rep 4,202
Posts
Drives: '11 335is | '16 Macan Turbo
Join Date: Aug 2015
Location: Everywhere and Nowhere
|
I have a thread going with logs that are very similar to yours and I'm about to replace my hpfp because it looks like it's starting to let go.
__________________
'11 335is BSM MT "BMW Performance Editon" | '16 Porsche Macan Turbo
GruppeM CF Intake | AR Resonated DP | ER CP | Turbosmart RacePort BOV | Cobb FMIC | RB Inlets | RB External Mishi/Turner OCC | Michelin PS4 | BMW Performance Springs/Bilstein B8 + Dinan & M3 bits | BMW Brembo BBK | BMW Performance CF Spoiler | BMW Performance CF Lip | BMW Performance Alcantara | PS Designs GTS Armrest | AG H6-40 | Rear Seat Delete |
Appreciate
0
|
10-26-2020, 02:51 PM | #7 |
New Member
3
Rep 20
Posts |
How are you actually determining that it is your HPFP though? I was told as long as rail pressure is >1500 on WOT you should be good.
|
Appreciate
0
|
10-26-2020, 03:26 PM | #8 |
Brigadier General
2685
Rep 4,202
Posts
Drives: '11 335is | '16 Macan Turbo
Join Date: Aug 2015
Location: Everywhere and Nowhere
|
__________________
'11 335is BSM MT "BMW Performance Editon" | '16 Porsche Macan Turbo
GruppeM CF Intake | AR Resonated DP | ER CP | Turbosmart RacePort BOV | Cobb FMIC | RB Inlets | RB External Mishi/Turner OCC | Michelin PS4 | BMW Performance Springs/Bilstein B8 + Dinan & M3 bits | BMW Brembo BBK | BMW Performance CF Spoiler | BMW Performance CF Lip | BMW Performance Alcantara | PS Designs GTS Armrest | AG H6-40 | Rear Seat Delete |
Appreciate
0
|
Bookmarks |
|
|