Who sells 90mm exhaust tips?

oldaccount · 12-30-2007, 02:27 AM

Im looking for 90mm stainless exhaust tips to replace my damaged OEM tips. I would prefer something with a flat edge instead of the rolled OEM-type edge, but either would be fine.

Something like the Eisenmann, SuperSprint, or Remus tips would be great. Eisenmann is the only company that sells the tips separately, but im not paying $350 for tips.

Fraggy · 12-30-2007, 10:25 PM

I think Magnaflow does...

oldaccount · 12-31-2007, 01:03 AM

Thanks!

I actually just stumbled across their page, but all their tips are slash/angle cut. I am really hoping to find some straight cut tips.

AU335 · 12-31-2007, 01:20 AM

Funny you just started this thread. I have also been interested in buying some larger mm tips. So the Eisenmann's are $350 for tips?

AU335 · 12-31-2007, 01:25 AM

Just looked on Eisenmann's site and it said the Premium (Heat baked) dry carbon fiber tips are $198

So does that mean you can buy them separate? If so, these tips are sick!!

oldaccount · 12-31-2007, 02:31 AM

Those tips are pretty sick, but I dont know if theyre $198-sick. Plus, I dont have any CF on my car anywhere, so they wouldnt really flow. For someone with a lot of CF, I could see spending $198 for them.

IND-Distribution · 12-31-2007, 02:20 PM

Quote:

Originally Posted by AU335

Just looked on Eisenmann's site and it said the Premium (Heat baked) dry carbon fiber tips are $198

So does that mean you can buy them separate? If so, these tips are sick!!

These tips are $198.00 and are available seperately. Feel free to contact me to place orders as they are in stock and ready to ship.

Doc E · 12-31-2007, 03:11 PM

are you guys thinking of cutting the tips off your OEM mufflers and welding on new ones?

oldaccount · 12-31-2007, 03:14 PM

Quote:

Originally Posted by Bimmbo

are you guys thinking of cutting the tips off your OEM mufflers and welding on new ones?

thats what im doing.

AU335 · 12-31-2007, 03:48 PM

That's what I'm planning on doing also

!Xoible · 12-31-2007, 03:55 PM

im just not interested in swapping exhausts on my car, but damn, i want quad tips... just the tips

oldaccount · 12-31-2007, 03:58 PM

Quote:

Originally Posted by mantis

im just not interested in swapping exhausts on my car, but damn, i want quad tips... just the tips

learn how to read. nobody said anything about quad tips. when have you ever seen 90mm quad tips, smart one. I am also replacing my tips because theyre damaged, not just for the hell of it. Theres also not an exhaust system out for this car that does anything for me.

fuck i hate people.

nice replica wheels btw. "i want ZCP wheels, but not real ones".

Doc E · 12-31-2007, 04:29 PM

i don't know if you guys are leasing your cars but if you are and you are planning to cut and weld new tips,
it might be a real PITA to reweld the stock tips on because there's really not much length to work with on the outlets coming out of the mufflers.
Also since the exhaust valve is located on the tip portion, this may further complicate future welding.
My stock exhaust was recently rewelded after i dumped my Drony AA catback and seeing how that was a big PITA i'm a little weary of hacking it up again.
My car is paid for but still when i sell it i want it to look 100% for resale value purposes.

But if one of you guys does it first, go ahead i'm curious since i already wasted too much on this whole exhaust thing already.

oldaccount · 12-31-2007, 04:32 PM

I own mine. Not too worried about tips affecting resale. My valve is already open, so if it comes off, no biggie.

Of course, I would prefer to keep the stock tips, but I dented them, so they gots to go.

oldaccount · 01-01-2008, 12:27 PM

Quote:

Originally Posted by Palella@Industry

These tips are $198.00 and are available seperately. Feel free to contact me to place orders as they are in stock and ready to ship.

are these tips $198 each or $198 for the pair?

IND-Distribution · 01-01-2008, 01:13 PM

Quote:

Originally Posted by Suareezay

are these tips $198 each or $198 for the pair?

$198 for the pair.

oldaccount · 01-01-2008, 01:27 PM

Quote:

Originally Posted by Palella@Industry

$198 for the pair.

thanks. i may have to consider these.

and just to make sure, you said it was $350 for the stainless, straight cut, non-rolled tip pair, correct?

IND-Distribution · 01-01-2008, 10:48 PM

Quote:

Originally Posted by Suareezay

thanks. i may have to consider these.

and just to make sure, you said it was $350 for the stainless, straight cut, non-rolled tip pair, correct?

That is correct.

Miami Bimmer06 · 01-01-2008, 11:31 PM

Quote:

Originally Posted by AU335

Just looked on Eisenmann's site and it said the Premium (Heat baked) dry carbon fiber tips are $198

So does that mean you can buy them separate? If so, these tips are sick!!

Those look sweeeet!!

IND-Distribution · 01-02-2008, 11:19 PM

Quote:

Originally Posted by Miami Bimmer06

Those look sweeeet!!

I have a few sets in stock. Feel free to PM me if you are interested in them.

12-30-2007, 02:27 AM	#1
oldaccount Colonel 162 Rep 2,456 Posts Drives: Car Join Date: Jun 2006 Location: USA iTrader: (2)	Who sells 90mm exhaust tips? Im looking for 90mm stainless exhaust tips to replace my damaged OEM tips. I would prefer something with a flat edge instead of the rolled OEM-type edge, but either would be fine. Something like the Eisenmann, SuperSprint, or Remus tips would be great. Eisenmann is the only company that sells the tips separately, but im not paying $350 for tips. Last edited by oldaccount; 12-30-2007 at 06:15 PM..
	Appreciate 0 Tweet Quote

12-30-2007, 10:25 PM	#2
Fraggy Brigadier General 193 Rep 3,469 Posts Drives: 2016 M3 Join Date: Jun 2005 Location: San Diego iTrader: (11)	I think Magnaflow does... __________________ 2016 Alpine White M3 (gone) 2019 Alfa Romeo Guilia (Totaled) 2020 Car-less 😁 (no more) 2020 M340
	Appreciate 0 Quote

12-31-2007, 01:03 AM	#3
oldaccount Colonel 162 Rep 2,456 Posts Drives: Car Join Date: Jun 2006 Location: USA iTrader: (2)	Thanks! I actually just stumbled across their page, but all their tips are slash/angle cut. I am really hoping to find some straight cut tips.
	Appreciate 0 Quote

12-31-2007, 01:20 AM	#4
AU335 Colonel 192 Rep 2,443 Posts Drives: 2007 e92 335i Join Date: Mar 2007 Location: Southeast iTrader: (7) Garage List 2007 335i [0.00]	Funny you just started this thread. I have also been interested in buying some larger mm tips. So the Eisenmann's are $350 for tips?
	Appreciate 0 Quote

12-31-2007, 01:25 AM	#5
AU335 Colonel 192 Rep 2,443 Posts Drives: 2007 e92 335i Join Date: Mar 2007 Location: Southeast iTrader: (7) Garage List 2007 335i [0.00]	Just looked on Eisenmann's site and it said the Premium (Heat baked) dry carbon fiber tips are $198 So does that mean you can buy them separate? If so, these tips are sick!!
	Appreciate 0 Quote

12-31-2007, 02:31 AM	#6
oldaccount Colonel 162 Rep 2,456 Posts Drives: Car Join Date: Jun 2006 Location: USA iTrader: (2)	Those tips are pretty sick, but I dont know if theyre $198-sick. Plus, I dont have any CF on my car anywhere, so they wouldnt really flow. For someone with a lot of CF, I could see spending $198 for them.
	Appreciate 0 Quote

12-31-2007, 03:11 PM	#8
Doc E Surf Caster Extraordinaire 30 Rep 672 Posts Drives: '13 ISF Join Date: Oct 2007 Location: NJ iTrader: (2)	are you guys thinking of cutting the tips off your OEM mufflers and welding on new ones? __________________ 335i gone!
	Appreciate 0 Quote

12-31-2007, 03:48 PM	#10
AU335 Colonel 192 Rep 2,443 Posts Drives: 2007 e92 335i Join Date: Mar 2007 Location: Southeast iTrader: (7) Garage List 2007 335i [0.00]	That's what I'm planning on doing also
	Appreciate 0 Quote

12-31-2007, 03:55 PM	#11
!Xoible Banned 832 Rep 46,029 Posts Drives: .... Join Date: Nov 2006 Location: . iTrader: (4) Garage List 2008 M3 [4.00] 2007 335i [9.00] 2008 528i [8.00] 2006 Infiniti - G35 ... [8.00]	im just not interested in swapping exhausts on my car, but damn, i want quad tips... just the tips
	Appreciate 0 Quote

12-31-2007, 04:29 PM	#13
Doc E Surf Caster Extraordinaire 30 Rep 672 Posts Drives: '13 ISF Join Date: Oct 2007 Location: NJ iTrader: (2)	i don't know if you guys are leasing your cars but if you are and you are planning to cut and weld new tips, it might be a real PITA to reweld the stock tips on because there's really not much length to work with on the outlets coming out of the mufflers. Also since the exhaust valve is located on the tip portion, this may further complicate future welding. My stock exhaust was recently rewelded after i dumped my Drony AA catback and seeing how that was a big PITA i'm a little weary of hacking it up again. My car is paid for but still when i sell it i want it to look 100% for resale value purposes. But if one of you guys does it first, go ahead i'm curious since i already wasted too much on this whole exhaust thing already. __________________ 335i gone!
	Appreciate 0 Quote

12-31-2007, 04:32 PM	#14
oldaccount Colonel 162 Rep 2,456 Posts Drives: Car Join Date: Jun 2006 Location: USA iTrader: (2)	I own mine. Not too worried about tips affecting resale. My valve is already open, so if it comes off, no biggie. Of course, I would prefer to keep the stock tips, but I dented them, so they gots to go.
	Appreciate 0 Quote